This Container Rollover Kicked our Butts!
Вставка
- Опубліковано 17 лис 2024
- This Container Rollover Kicked our Butts! - This container rollover was CHALLENGING! Normally we just show up, park the rotators, rig expertly and have that baby up in minutes. Every job is different and this one threw a curveball at us. For starters, the tractor on the divider combined with the container off the front made it difficult to remove the remaining rear container lock. Normally you just pull and turn them, but the chassis had so much pressure from being "twisted", it made it impossible.
In a normal scenario, you just scoot the container close to the chassis to unlock it, or even lock them all back up. We could not do that here because of the tractor and front of the chassis still up on that divider. We tried and tried, could not do it, so I made the call to Hulk out and do a very advanced two step move.
Step one was to upright the container as is and set it right back onto the chassis so we can lock the pins. Step two was to then lift everything over and set back down onto level ground so it can be towed away. I lost my mojo with the heat and with the lock not coming out, so most of this was filmed with Alex's GoPro and my Insta360. Hope you guys enjoy !
Don't forget to head to www.pepestowla.com/shop after the video and grab your cool Pepe's swag to represent your favorite tow company!
►All footage was shot with my Sony FX3 and Alex's GoPro, along with my Insta360 RS 1". I also edit my own footage using Davinci Resolve Studio.
►My company logo and intro/outro graphics were created by / sa.creations
►I purchase my rigging equipment from: baileystowingi...
► The wireless headsets that I use on all my rotators:
setcomcorp.com...
► Buy your own Guardian Angel Device just like mine here!
www.guardianan...
►Get your Pepe's Merchandise here: www.pepestowLA.com/shop
►Instagram: @pepestowing
►Facebook: / pepestowingla
#rotator #recovery #heavyrescue #millerindustries #heavywrecker
Beautiful job re-mounting the container on a twisted chassis. Well done Josh and Alex!
Is it nice that Los Angeles supplies you with plenty of crazy drivers to keep you busy. great video as always.
Dude seriously freeclimbed that container. That's impressive!
I know, right?
These dudes do that all the time and it blows me away.
Even though this lift was a difficult one due to that damaged lock, you guys still made it look easy.
Crazy how that one pesky lock made hard work of an otherwise straight-forward job.
Always love to hear Alex’s soft spoken voice, that stays the same even under a stressful situation.❤ Thanks for another great video, gentlemen!
I always worry about you guys when you are up on the containers rigging or in this case trying to get that lock to play, (camera makes it look worse) couple times i thought you were going over Alex. Great job boys, stay safe.
Tough job by some really professional tow drivers working together.
Watching the 2 taters and the wrecker working in concert is like watching an intricate dance - real beauty in motion. Watching the young fellow stand on the duals of the twisted frame as he tries to pry it away from the container was like watching a guy stand on a branch as he saws it away from the trunk. I'm glad that lock didn't turn loose.
I am suitably IMPRESSED!!! It all comes down to the physics of it. Great job, and ingenious thought process that went into curing the problem. Sure shows why you are the leader (next to Dad of course!). Brightest of Blessings! Keep up the good work!
Well done Josh and Alex. That was a challenge for sure. Stay safe guys.
okay I have never been so stressed out watching!!!!! I am so glad everything worked out! and I totally get it y'all did what you had to do with how things were!
JOSH! ALEX! HECTOR! WAY TO GO!
YOU GOT THE JOB DONE AS SAFELY AS YOU COULD!!!
PLEASE BE CAREFUL OUT THERE! Y'ALL ARE WORTH MORE THAN THAN A BUSTED UP RIG!!!
THANKS FOR SHARING AND KEEPIN IT REAL! 😅😊
Great recovery. Takes a lot of different ideas and coordination.
I got seriously "involved" in at reset, thanks for sharing, kudos!
Great job
Someone said Easy-Peasy. That jinxed it.
You guys are wizards with those rotators!
Very nice work 👍😊
Hey Pepe's towing service! Great vid man thanks a pile for posting it! Love the insta360 footage from the boom! Freedom of camera angle after its recorded is amazing! Stay safe! Ride ride ride!
Very good job!
Excellent job improvising in VERY tight quarters!!!! Very cool video!! Take care and be safe my friends!!
Nice job. You all have some great equipment.
some class improvisation on the spot under pressure there guys! That is one heck of an awkward recovery well done!
Oh boy! It took so much power to set that thing straight! But as always Josh, you find a way to overcome the problems! 👍
Tough job but great team work. Thank you for sharing.
That was a tough one! Good work as usual!
Good job guys getting it off one chassis and on another!
Nice one. Good recovery. Great video content. Thanks
Gr8 piece of work there Josh.
I never saw you do one quite like this one, good job wow! "How in the heck did you scale up the back of the trailer without a ladder"!
Hey Josh ///Alex & Hector !!! Great work by ALL To ""GET--ER-- DONE "" !!!! 🙃😉🤔🙄👍👍👍👍👍
🎉that was one heck of a recovery. You guys are fantastic
THe 360 on the boom really showed the forces ( is torsion the correct word to use) at play both on the boom and cables themselves but also on the container and chassis when manoeuvring it.
I just love it when a plan comes together.
Another awesome job by Pepe's !🤓🙋♂️👍
Another great video I had forgotten about. Putting the container back on the chassis was awesome. I'll bet you ran a couple of miles during the recovery. You both were great. Thanks for the video and the editing.
When Alex was topside trying to pry that jammed lock off the container while standing on the trailer, I was worried it might suddenly give and throw him off. There was too much torsion on that trailer. Luckily it stayed stuck while he was up there. BE CAREFUL!
I've never seen that many armchair quarter backs ! I knew that you would get this . There's no job you can't do ! That was a cliffhanger for sure . Great video .
Another fantastic video! Thanks for the hard work into the videos. Stay safe out there!
Good job guys….stay safe
Muy buen video felicitaciones al equipo!!!!!
That one just didn't want to. Nice work.
Alex is probably lucky that pin DIDN'T come out. I could just see the chassis unwinding and throwing him right over that wall when he was standing on the tire...😳
That is correct and why all the comments saying just cut it are not smart. With a slightly offset vertical line and the deck winch pulling it, the chassis wouldn’t recoil that bad. But seeing how stuck it was, I did not want to take that chance. It’s hard to hear but I say just that in the video , that it’s too dangerous which is why I made the call to upright it and set it back on instead of splitting
Great recovery you had to work at that one
You earned your pay on that one.👍
Climbed up like a pro
Vantastic !!! Job.
Hi,from Newfoundland Canada ,,I don’t know any questions to asked ,so I will just sit and watch the amazing videos of the moves.
Nice job Joshua
Good job crew, that was a fist full of anxious moments ! I like the way you can climb that container at the rear, even in my youth that alone would be a challenge! (for me)
Wow! What a nightmare 😮
They should check the locks beforehand after it's on the trailer
For stuck pins I have a flatbed bar with the square head I hook the bar around the handle and lean on it I'm 350 lbs and it's a 40" bar. Love 💓 your videos.
Looked like you was removing tractor trailer from turn one of a Nascar track. Quite an angle the ramp was and leveling the truck from the rear. Good job with the crew working together.
This is what happens when you hire wheel holders with no green cards….
Nice job josh you always do a great job 👍
Fun that I now right we're are at. I grew up in California. Worked in Long Beach. My dad was in the Coast Guard There
I'm trying to understand the damage to the truck. Did he roll onto his side, slide a ways, then flip partially back up and onto the barrier, or was this his second accident of the day, and the scrapes were from an earlier rollover?
No problem for The hawk and big flipper They get the job done with no problem at all specific Josh and his crew always on seeing always doing a good job and In California All the place you see the biggest names It's pepe towing
Josh, as always, the man with a plan.
Looks like that isn't the first 'incident' that truck has had...maybe that driver can't learn...is dangerous to others!
if these were simple anyone watching would do it
Facts
TOTLA BAD ASSES
IMPRESSED!!!
Thought Hulk was toast. Well done.
What year is old yeller the PETERBILT 379 60 ton rotator truck your dad is assigned to?
I really love these towers that nag about no room!🤣👍👍
Good afternoon from Southeast South Dakota
Peace,,,,,!! Great video!!
I hope you guys do your refresher course on unleashing potential energy.
Trying to disengage the chassis from the container while standing on the tire was putting your life in danger. You’re lucky that it didn’t come loose. The twisted chassis was under tons of pressure and your skull is not a steel ball. It could have been smashed on the other lane into a thousand pieces
The infamous pin yes we all have had them Nice Work Pepe's Crew !
That's crazy, what a feat.
I only watch these when Alex is doing the recoveries.
Sounds pretty sus bro. Sorry to break it to you but he has a girl and kids and isn't interested in guys
Sounds like Josh is answering 😂😂😂 mas put! Your the sus thinking this way foo.
@@PepesTowingService i was saying cause he doesnt talk or is a marika like Josh. 😂😂😂😂
You fail to realize the beginning of my channel I was the same. People told me "I don't know what's going on, talk more and explain ". So I did and the channel blew up. But regardless, thanks for watching lol I'll tell Alex you said hi
Lmfaooooo bro wants to talk about sus???? I have zero comment, just tell your parents I feel sorry for them for raising this ua-cam.com/users/shortsqCAsPdeUgS4?si=PpFMBjaz6lkC8M7h
One stubborn container
A challenge is always good for the brain
Another great job by Hulk and Flipper. Hey, whatever happened to your truck that got side swiped? Is it fixed yet? Love your videos.
Have you considered carrying something like a plasma cutter on the truck? Obviously would probably only be key in situations like this but when you do use it, it would probably be worth it's weight in gold to simplify things
Just be carefully out there.
All due a stupid lock dude. That must of being frustrating however you guys one of the best when it comes to recovery and videos on youtube. Great video guys
8:30 - Alex is a BEAST! Look at him out there working that cheater bar like it's a wiffle ball bat. Then he follows it up with a Mr. Miyagi balance challenge!
awfully dangerous to be standing on the container trailer frame, if it should come loose!
You're more of a professional than I. After about three minutes there would have been oxyacetylene involved.
Reupload or another driver again?
Cut off saw?
With the rotator on the front, had you slid the front of the box towards the chassis, while keeping the chassis tight to the rear of the container, it should have released the tension on the locking pin. I haul and lift containers regularly, the slightest tension will bind those rear pins.
That one was a pain for sure!! In real time, how long did this one take Josh? Keep up the great videos🙂
Why can’t you use a chop saw to cut that lock. you have the winches holding everything with big flipper
What port is this at? Long Beach? Love the videos! Maybe include a brief message about where these recoveries were located. That would be awesome. Keep up the good work!
Would be nice to have a good sized plasma cutter and a carbon tourch for making a job faster but it would cost money to have a service truck with it. Maybe it would be defendable cost
Got enough help there? 😊
that will take a little more than a bottle of T cut and a dent puller🤣🤣
Peace to you
That looks like a real nasty one, bent twist lock twisted chassis.
Awesome video Josh , you made that difficult recovery look easy
Question though !! .. could you have used a Sawzall or chop saw to cut that damaged pin ???
I was mentally reaching for cutting tools the whole time. Dunno if that would help, but that's what I would try...
Ratchet binder too release the tension from the twist of the trailer in the front
10:00 Yeah the chassis and the tractor need to move towards the container or disconnect the tractor and move the chassis.
💪💪💪💪💪💪💪💪
Is it possible that you can get the trailer lifted up and pulled back to get the truck off the wall? The damage is already done, so I don’t think it will matter what happens to the trailer.
Hi
Get a cutting torch
It’s crazy because these locks are only held closed with zip ties and half the time, drivers don’t even use them..containers need WAY more securement then zip ties or at least more than 4 corners. I HATED pulling containers