@@TonecrafteLuthiery yours is bootleg though.. These are proper filler sets that won't wear down fast. You put bloody paper or cardboard in your fkn controller.
Click 30x videos are for another problem,this is when u have the controller for a long time and are just worn out,while the others are for sprint cancelling that has happened to me on all 3 of my controllers and the 30x fixes the problem.
Thank you! Thank you! You've really opened my eyes to how the mechanism worked and how to alleviate any of the problems with my sprint error. Imma fix this once I wake up lol.
there are hundreds of videos out there claiming to fix this problem i must have watched aroud 75 or so before finding this one and all 75 were crap. this fix is absolutely legit thanks
Ok so i ordered this guys stickers and placed them exactly where he said to put them, also sprayed the analogs with compressed air , and it definitely helps however does not get rid of the issue. The problem is deeper than placing stickers on those pads so I would avoid being tempted ordering them
So guys this definitely works altho I didn't order the round wee tiny thingy I used small rounded stickers instead. And if your controller doesn't have a huge gap I still insist that you slide one under it and it might work out for you. But I mean once your controller starts acting weird some sort of problem will always arise like for instance my square button isn't properly working now 😭🤣 and I'm constantly in this loop of fixing my controller every other day.
The L-R3 buttons not working or acting glitchy does not necessarly mean those plastics are worn out. Before you start adding bits to your controller just try airdusting around there and then spraying a little contact spray over the stick and click mechanism. Cleared it right up for me and many others. Might just be the contact patches getting a little dirty and clogged up. Would strongly recommend trying to just clear and clean up those moving parts and contacts before you start adding things. I'm sure what is shown here is great advise for that problem but your RL3's not working might very well just be some dust and dirt particals building up over time.
I’m going to try this with my old controller. I’m hoping I haven’t damaged that controller already. I tried to get it to work using all the wrong methods lol. I wish this video was out at the end of 2016.
This is genius 👏 🙌 I love you guys. Just replaced my flex circuit boards and got L1 n L2 working then R3 gave up on me lol. So excited to see if this helps. Thanks so so much xxx
If you are really scared to open your controller and do stuff inside the motherboard, then just get some joystick caps that are little bit longer, i recommend Kontrolfreeks PS4-Galaxy. They cost something around 14.99$ and there is a long length and a middle length stick in there, they are recommended by many youtubers, it won't really fix it, but it'll feel like it is easier to press the L3 or R3 buttons.
and here i was looking at vids that said that it was the sensor......dummy me for believing it. i opened it several times to clean it only to get the same results. thanks for this. i opened it and it does the same yours did. now all i need is stickers lol
I purchased these and waited over 2 weeks for them to arrive. At first I thought they fixed my issue, but the adhesive on these are terrible. They would fall off of the button and I'd lose them. I ended up using all of them and eventually they lost their stickiness. I could just be an idiot, but, in my opinion, they aren't sticky enough (Yes the sticky side was facing down). Kinda disappointed.
L3 only doesn't click well when stick is forward. Will this be an issue? I assume raising the button may make it too high for when the joystick is in resting or non-forward position.
Heads-up, the thumbstick mechanism is the same for the DualSense controllers for PS5, and I resolved this similar issue moments ago with two square bits of electrical tape. This is not a difficult issue to fix at all.
Guys i fix it... If u can't buy this product i have a solution. It works for me, take a 1cm stripe of scotch heavy duty packaging tape and stacked one by one this stripes of heavy duty scotch tape (is what i used .. it works for me). Cut 5-8 stripes and stacked it. 8/9 is the maximum thickness, above that it would not fit. Then cut this stripe in a square or circle that fits in the R3/L3 buttom. Good luck, thanks me later if it work if does not, lets find another solution.
Worked for me thanks. Layered clear packing tape 6 times then cut small square and used that to stick to the small black button and so far its working correcrly
No.. that paper will start going to bits in no time and you'll have that floating around in your controller till it finds a good place to ruin your game.
Then I think the metal popup part inside the tact button is dead and doesnt pop back up. You will need to replace the tact button which requires you to remove the whole module unfortunately..
Does this help the stick feeling like it's cutting in and out pressing forward?. Not clicking just pressing forward. I have 3 dual shock 4s and they all started with l3 being intermittent and now pressing forward without engaging l3 stutters...
when i try to make a character walk in the game, it often stops, like in certain point of the analog is not working, but just going forward, if i walk to back or sides this dont happens
My controller has the same problem, but it's not the plastic that's faulty, its the actual button below the plastic that's not clicking, how do I fix that?
I have this issue with the R3 button, the button itself works but it no longer makes the clicking. I opened it up like in this video and it seems the problem isn't the orange stick pushing down the button but rather the button itself. I think there is a spring under that button that causes the clicking but I don't see any way of fixing this because I can't disassemble that part....
I have this problem but instead of it not working when i have the button tilted it only doesnt work when its directly in the middle so i cant peak in r6
Hi do you have any videos on how to fix the x button please? I have tried cleaning inside after taking controller apart but no joy. Is there any chance you have a fix on this please? Thank you in advance much greatful :)
Being state side I will have to make some of my own. I do have a cutter what thickness sticker do you use? Thank you so much for the video I can't wait to use it and get my controller back!
I have so many controllers in my garage all got the same problem i try fixing it even I brought the whole R3 assembly but got lazy I buy a new one every time back in Advance warfare 6 controllers Bo3 4 controllers Infinite warfare like 3 ww2 . 2 controllers Bo4 Four controllers and now warzone I’m going on my second controller .
there's still hope.. stay strong all of my brokenhearted brother & sister cod players
lol
XQ Gaming the dramatic ass music he has at the beginning had me crying i was laughing so hard
😂😂😂 ur just like me i friking have to apply presuure with my hole fist on l3 to sprint😂😂
I think I just broke mine playing cod
Warzone killed mine... Thank God for the auto tac sprint function xD
The most hopeful one no lie. Guys props to him, every other video was it working. "Click 30x" false.
yeah. ironically that would just wear out the plastic lever even faster lmao
HighFlyEli Except for the fact that he stole my solution, and reposted it. ua-cam.com/video/t3RyjY6o14E/v-deo.html
Happy Thoughts, chill you guys had different solutions in how to fill the gap.
@@TonecrafteLuthiery yours is bootleg though.. These are proper filler sets that won't wear down fast. You put bloody paper or cardboard in your fkn controller.
Click 30x videos are for another problem,this is when u have the controller for a long time and are just worn out,while the others are for sprint cancelling that has happened to me on all 3 of my controllers and the 30x fixes the problem.
Thank you! Thank you! You've really opened my eyes to how the mechanism worked and how to alleviate any of the problems with my sprint error. Imma fix this once I wake up lol.
This video is the best explanation I've seen so far in regards to fixing the L3 button problem. Good job.
there are hundreds of videos out there claiming to fix this problem i must have watched aroud 75 or so before finding this one and all 75 were crap. this fix is absolutely legit thanks
60 bucks for a controller and they can't make it metal to last longer
DBONEZ it would be heavy...i think..?
@@rebazuki it's because they want u to buy another
No, don’t think so at all...
it would not
be heavy u pressing down on it
It would leave metal shavings
Now that I understand how the mechanism works I can finally fix my PS4 controller, thanks dude this is amazing.
Finally a video that isn't about stick drift
Ok so i ordered this guys stickers and placed them exactly where he said to put them, also sprayed the analogs with compressed air , and it definitely helps however does not get rid of the issue. The problem is deeper than placing stickers on those pads so I would avoid being tempted ordering them
Exactly. I would try using cheaper material like paper or foam first. There can be a number of problems that a sticker won't fix.
any sticker paper works, but this does actually work, feels like a dream
Awesome tip had to do it with tape but it worked exactly the same after cutting it out into small circles too
What kind of tape
the tape idea was really helpful thanks
ty so much !!
I’m having a problem with my L3. When I click it in too hard, it makes my R3 work. Really frustrating when I’m trying to sprint and my guy crouches
So guys this definitely works altho I didn't order the round wee tiny thingy I used small rounded stickers instead. And if your controller doesn't have a huge gap I still insist that you slide one under it and it might work out for you. But I mean once your controller starts acting weird some sort of problem will always arise like for instance my square button isn't properly working now 😭🤣 and I'm constantly in this loop of fixing my controller every other day.
The L-R3 buttons not working or acting glitchy does not necessarly mean those plastics are worn out. Before you start adding bits to your controller just try airdusting around there and then spraying a little contact spray over the stick and click mechanism. Cleared it right up for me and many others. Might just be the contact patches getting a little dirty and clogged up.
Would strongly recommend trying to just clear and clean up those moving parts and contacts before you start adding things. I'm sure what is shown here is great advise for that problem but your RL3's not working might very well just be some dust and dirt particals building up over time.
This worked for me. I used a piece of paper though. Saved money I’m happy. Thanks.
How did you do it tho
Sir, god bless you. You helped me fix all 4 of my controllers
This was Super helpful and doesn’t involve dousing my controller in grease
hahah
your a god send! L3 is sprint and R3 is dropshot! i play wayyyyy to much and im sick of paying 60-70 every 3 months! thank you so much!
Great video! I can't wait to try this for a controller I have where I have basically tried everything else. Well done.
THANK YOU!!
My issue was that running stops randomly but with this video now its work perfectly!!
Thank you posting this video. It helped me fix my L3 sprint glitch. You saved me 50$
Thank u for showing me that my L3 button was not clicking and I saw what the problem was thru this video thx it really healped
best vid yet on this issue, nice work!
excellent demonstration of the actual problem.
I’m going to try this with my old controller. I’m hoping I haven’t damaged that controller already. I tried to get it to work using all the wrong methods lol. I wish this video was out at the end of 2016.
Really need this, I've screwed my ps4 controller L3 and all it was about was "fixing" the sprint, which I don't need, definitely a lifesaver
Worked like a charm. Barley even have to press to run now. I didn’t wanna wait for those little sticky circles so I just used tape xD
Vampi115 how TF did you cut tape that small lmao
How did you do cit so small
Thanks for the tape tip bro I was wondering what I could use around the house. Also he prob cut it w a xacto knife? That’s what ima use.
This is genius 👏 🙌 I love you guys. Just replaced my flex circuit boards and got L1 n L2 working then R3 gave up on me lol. So excited to see if this helps. Thanks so so much xxx
any update about your R3?
@@snow4562 hey 👋 yeah it's all working thanks. Bought some more to fix since and really enjoying it. Thanks for asking xx
If you are really scared to open your controller and do stuff inside the motherboard, then just get some joystick caps that are little bit longer, i recommend Kontrolfreeks PS4-Galaxy. They cost something around 14.99$ and there is a long length and a middle length stick in there, they are recommended by many youtubers, it won't really fix it, but it'll feel like it is easier to press the L3 or R3 buttons.
I’m ordering some bro! Hope it helps my issue. I’m also going to use some WD contact cleaner to clean it while I have it opened up.
I know this video is 7yrs old but do the stickers have to be stickers?
Great video. Clear to see what you're doing. Will do this next time it happens to me
I just ordered it from your link.
I hope this is the solution!
I've gone thru soo many controllers bc of the l3 being worn within weeks of purchases.
Did it work?
@@victorguevara2708
No.
@@uangrybroentertainment dang
and here i was looking at vids that said that it was the sensor......dummy me for believing it. i opened it several times to clean it only to get the same results. thanks for this. i opened it and it does the same yours did. now all i need is stickers lol
I came here to repair my controller bro not to cry
What?
Similarly, the adhesive-backed gasket material you get for most phone or tablet repairs will accomplish the same task.
Guys omg It worked!!!! Thank you so much. This is amazing 🥰🥰
omg i thought this idea up myself i just didnt know what to use as the filler. i thought tape but i wasnt sure it would be solid enough.
give this man a medal
Brilliant fix! Thank you very much!
I purchased these and waited over 2 weeks for them to arrive. At first I thought they fixed my issue, but the adhesive on these are terrible. They would fall off of the button and I'd lose them. I ended up using all of them and eventually they lost their stickiness. I could just be an idiot, but, in my opinion, they aren't sticky enough (Yes the sticky side was facing down). Kinda disappointed.
I think my controller is totally fakked. I remembered I heard a sharp cracking sound when I placed thumb grips on the sticks.
Nice video man.
Seriously the best fix just fixed 3 broken controllers! Sony should be replacing these every controller I've had was broke
Great they work again :D
yeah sony is a fuckin shitshow.... they break all the time
What size are the stickers? (mm)
THANK YOU. Saved me $64 and I cant get a new controller during quarantine!
Hey dude did you buy the stickers or use something else?
omg...i need to fix this...its getting on my nerve
@@ranierb1201 No I cut out some electrical tape, it worked fine
Amin So it fixed the sprinting problem?
@@austindehart2669 Yes it did! I'm an engineer and when i saw the video it made sense. It's been working fine for me so far
Guys a really easy tip to fix it blow on the r3 and l3 from every side it worked for me
L3 only doesn't click well when stick is forward. Will this be an issue? I assume raising the button may make it too high for when the joystick is in resting or non-forward position.
Guys instead of buying this, you can cut a sticky tape
Does it matter the brand
How to fix it without that black thing?
Heads-up, the thumbstick mechanism is the same for the DualSense controllers for PS5, and I resolved this similar issue moments ago with two square bits of electrical tape. This is not a difficult issue to fix at all.
I realized when he was putting the stickers on my body was getting all tight like i was the one trying to not shake while doing it haha
Thanks man, you helped me a lot
Say bye to my controller 😪😔😢
What is the piece called thats right above the red thing. That grey piece. Thats what my problem is.
Hi!
I have the problem that when i'm running (once press L3) it's stop running randomly. Fix that this issue too?
Thx for answer.
njeri123 did it work for you? I'm having the same problem
i had the same problem and thx to this vid now its work perfectly!!
Im going to try this but yeah it seems it will fix it bc is a problem with contact. The problems has the same principle !
Guys i fix it... If u can't buy this product i have a solution. It works for me, take a 1cm stripe of scotch heavy duty packaging tape and stacked one by one this stripes of heavy duty scotch tape (is what i used .. it works for me). Cut 5-8 stripes and stacked it. 8/9 is the maximum thickness, above that it would not fit. Then cut this stripe in a square or circle that fits in the R3/L3 buttom. Good luck, thanks me later if it work if does not, lets find another solution.
@@ThatGuy.Anarchy everyone has this problem ( trashy Sony)
Now this is science. Thanks man
Worked for me thanks. Layered clear packing tape 6 times then cut small square and used that to stick to the small black button and so far its working correcrly
Is still working after all theses months?
Thank you man i was about throw my ps4 controller against the wall because of rainbow
My L3 doesnt make the clicking sound.. thats my prob
Sane
same for me
if l3 won’t click then the button broke and detached from the stick
@@miser_y so this wont help in that case?
it work, thank you so much
Problem for me is that R3 is always clicking by itself, and so I have no control over it
Thx it works
I can't buy these in my country or order it from you.
What can I use for replacement ?
I would appreciate it if you told me
Thank you , you got my subscription , the opening process was madness but you saved 60$ in my pocket haha
So....... we're basically fixing their shotty work?
Yup i’m subbing, thank you for the help
Well, I press my L3 and it fires a gun when I play any shooter 😐
Excellent alternative thanks!
Thank You , is better now 👍🏻👍🏻👍🏻👍🏻
Great!
Can you also take normal paper instead of the filler sets?
No.. that paper will start going to bits in no time and you'll have that floating around in your controller till it finds a good place to ruin your game.
my L3 is automatic working constantly sprinting,how to fix that?
Then I think the metal popup part inside the tact button is dead and doesnt pop back up. You will need to replace the tact button which requires you to remove the whole module unfortunately..
Does this help the stick feeling like it's cutting in and out pressing forward?. Not clicking just pressing forward. I have 3 dual shock 4s and they all started with l3 being intermittent and now pressing forward without engaging l3 stutters...
Thats how to do Video Fixes. YT found his Champion!!!
when i try to make a character walk in the game, it often stops, like in certain point of the analog is not working, but just going forward, if i walk to back or sides this dont happens
Dude ur d best.
Can I just use paper circles instead of that
Nvm don't try it, paper is too bland and it actually makes it worse.
No paper no stickers i use a wd-40 electrical contact and its works! I clean all controller wd-electrical contact
Spray a bit of wd40 not loades just a drop and it dose the job for control drift and stuck sprint
I just got my controller how did it break wtf
What's the size of the stickers?
My controller has the same problem, but it's not the plastic that's faulty, its the actual button below the plastic that's not clicking, how do I fix that?
Worked and I used a small piece of electrical tape
Fantastic !! Thanks !!
Could you please drop a long or the part # to the pieces you’re replacing?
So what can I do if the gray piece that surrounds the red part breaks off?
Toaha48 Just super glue it back into place. I have done this and didn't have to buy a new controller.
I’ve seen someone just put a piece on cardboard in there and it worked fine
I have this issue with the R3 button, the button itself works but it no longer makes the clicking. I opened it up like in this video and it seems the problem isn't the orange stick pushing down the button but rather the button itself. I think there is a spring under that button that causes the clicking but I don't see any way of fixing this because I can't disassemble that part....
Without soldering? But where are the two rumble motors on this PCB??
I have this problem but instead of it not working when i have the button tilted it only doesnt work when its directly in the middle so i cant peak in r6
Thank you so much for this!
No problem
Hi do you have any videos on how to fix the x button please? I have tried cleaning inside after taking controller apart but no joy.
Is there any chance you have a fix on this please?
Thank you in advance much greatful :)
Being state side I will have to make some of my own. I do have a cutter what thickness sticker do you use? Thank you so much for the video I can't wait to use it and get my controller back!
Thank you! My Scuf controller R3 can’t aimbot shoot missing in Warzone.
Noob
I have so many controllers in my garage all got the same problem i try fixing it even I brought the whole R3 assembly but got lazy I buy a new one every time
back in Advance warfare 6 controllers
Bo3 4 controllers
Infinite warfare like 3 ww2 . 2 controllers
Bo4 Four controllers and now warzone I’m going on my second controller .
Спасибо,вы помогли решить проблему!
thank you for your help!
i have to do it with a joystick that i replaced, the button do not work properly when i move the stick
I have the opposite problem. I do the "accidental melee" during gunfights in COD all the time. I want the R3 to be harder to press.
And I just found the stick tension video, and that's not happening, so I guess I'm screwed.
When I press L3 it confuses it with L2 and R2. If I do this will it solve the problem?
I must be a smart guy cuz i shimmed my buttons hour ago n decided id better see if a pro has a better idea.