Tips for attaching a resin printer supports!
Вставка
- Опубліковано 19 жов 2024
- I made this to solve the problem of dents (e.g acne marks) where the support was when removing the support after resin 3d printing.
For those of you who are interested in figure printing, I made a video with one small tip.
It's not a perfect setting, but I'm currently printing well with that setting.
However, it is natural to print out a very thick or full print, but if you increase the overall diameter, you can print a smoother print.
레진 프린터 3d 출력 후 서포트 제거시 서포트가 있던 자리가 움푹 파이는 문제(일명 여드름 자국)를 해소해 보고자 만들어 봤습니다.
피규어 출력을 취미로 하고 계신 분들을 위해 소소한 팁 하나 영상으로 만들어 봤습니다.
완벽한 설정은 아니지만 전 현재는 저 설정으로 잘 출력하고 있습니다.
단, 내부가 많이 두껍거나 꽉찬 출력물을 출력하실때는 당연하지만 전반적인 직경을 두껍게 하시는게 더 매끄러운 출력물을 출력할 수 있겠지요.
오늘도 즐거운 3d 프린팅 하십쇼!
THANKS for the tip. This has changed my life. I primarily print statuettes like you Necromancer and they come off so clean it's pathetic. I've watched a million videos on supports and this one was the first that actually was usefully in making the supports effective yet easy to remove with little to no damage to the model.
this! always wondered why people prefer those pitholes versus something that can easily be sanded down.
영상 보고 시도해 봤는데 진짜 좋습니다. 전에는 서포트 땔때 푹푹 파고 들어가면 진짜... 팁 정말 감사합니다.
잘 적용되신 다니 좋네요. 감사합니다. 새해 복 많이 받으세요. *^^*
감사합니다. 새해 복 많이 받으세요
THANKS EXCELLENT
I adopted this technique after seeing your video many months ago. It works very well, but I still have the problem of some supports ripping while printing. Could you share your lift speeds? I understand speeds vary from machine to machine, but it would be good to get some idea of the speed you are printing at
Thank you, your videos are awesome, I can't wait to see what you make next!
The print speed was not touched at all in the initial settings.
I'm using mighty4k 8k, so I think you can check it out on Cheetoobox.
If the supporter is torn, it will be a matter of thickness, so it is recommended to extend the thickness of the upper part from the basic state, rather than simply exchanging the diameters on both sides.
hello. your settings are wonderful. did you manage to repeat them in the new chitubox? having hard time to replicate it.
also, could you maybe share the rest of the settings for the middle and bottom?
Thank you, I will try this to print 45cm tall Endgame's Thanos.
프라모델 런너에서 떼어낼 때 게이트 조금 남기고 자르는 것과 같은 원리군요. 좋은 팁 감사합니다!
Hi, do you always use the medium support for most of things?
안녕하세요 좋은 팁 감사합니다 밀도는 90% 엄청 많아 보이던데 보통 몇으로 하면될까요?
서포터를 어느정도의 두께로 했느냐, 모델의 크기가 어느정도 이냐에 따라 다르겠지요. 정답은 없는 듯 합니다. 여러번 출력을 거치면서 느끼는대로 하는 것이 맞는 듯 합니다. :-)
잭님의 다른 영상들을 보면 중대형 피규어들이 많은데 설정값 직경 0.35 / 0.30 밀도 90%로 모두 동일한가요?예전에 시도해봤는데
밀도의 문제인지 서포터에서 출력물이 인쇄될때쯤 떨어져나가더군요 ㅜㅜ
아니요 모두 동일하지 않습니다. 경우에 따라 훨씬 두껍게도 합니다.
제가 영상에서 말하고자 한건 오브젝트쪽의 두께를 굵게 하면 안으로 파이지 않는다는 것이고요, 출력물의 종류에 따라 가늘은 서포터와 중간두께의 서포터 두가지를 사용하면서 출력합니다.
@@JacksHobbyChannel 답변 감사합니다~
주말 잘 보내시구요~eye 데칼 잘쓰고있습니다 ㅎㅎ
@@양팀장-r9u 넵 감사합니다! eye데칼 구매 해 주신것도 감사합니다. 즐거운 주말 보내세요~
Why is the support density so high? And another question, have you gotten a better configuration for the supports?
Don't you know the trouble when the surface of the printout is dug? 😉
@@JacksHobbyChannel Hello friend, one question, how do you sand the supports that you use or what do you recommend? And what Vallejo paint do you recommend for anime skin?
@@victorsanrtx2787 1) ultra sonic cutter for supporter cut at first.
2) normal sander.
3) Colors are personal. I don't recommand any colors.
You have to choice yourself.
@@JacksHobbyChannel Thanks a lot
@@JacksHobbyChannel I am very new to this, I am just starting but I have the paints and materials to work with. I would just like to know if you can patch up some videos or something to start with because I don't know where to start
still needs sanding...🤷♂
However, it can prevent the model surface from being pitted by the supporter. 🙂
@@JacksHobbyChannel wouldn't one still get the pits as the little left over stubs are broken off?
@@kensaiix Depends on how you trim it.
If cut the supporter finely with a knife in the first place, the result will be the same.
But in my case, to make it easier to trim, I first tear off the supporter by hand.