Handbag Creation Process

Поділитися
Вставка
  • Опубліковано 20 січ 2025

КОМЕНТАРІ • 78

  • @kir11
    @kir11 Рік тому

    Very good example of a different forms with zip, not just boxed item. Thank you!

  • @CLO3D
    @CLO3D  4 роки тому +14

    Some people mentioned that their lining was "puffy" after sewn in. The speaker mentions that the sewing line type needs to be changed to "Turned" @ 4:10 - this is a property that can be changed to allow a seam to press open or closed, basically will allow that edge to hinge so the lining does not bubble at the edges where lining and bag meet. It is explained thoroughly how to change Sewing Line Type in the tutorial linked below.
    ua-cam.com/video/owWiplmx88w/v-deo.html - Timestamp for this part is 16:08

    • @o0JUJU0o40
      @o0JUJU0o40 4 роки тому

      Instead of creating the zipper; I used the Zipper tool. Why is the Zipper tool fails every time I simulate ? No matter what the bag either implode on itself with the lining going out and simulation never stabilizing or go airborne and disappear from the view.

  • @madihajabbar2001
    @madihajabbar2001 3 роки тому +1

    I cannot sew handles with main fabric's internal line at step at time 2:13, internal lines are not being selected by sewing tool.

    • @CLO3D
      @CLO3D  3 роки тому +2

      If those lines are purple dotted lines, they are Baselines. You need to use the Trace tool and convert them to Internal Lines.

  • @Hindispritiualgyan
    @Hindispritiualgyan 4 роки тому +4

    The fabric is falling apart after i stimulate, should i increase the particle distance[ i even strengthen it]. Please help

    • @CLO3D
      @CLO3D  3 роки тому

      Sorry for the late reply. Were you able to solve your issue.

  • @jbtube73
    @jbtube73 4 роки тому

    Great tutorial. Fellow Marvelous Designer user here.

    • @CLO3D
      @CLO3D  3 роки тому

      Glad it was helpful!

  • @TheMabinogiLife
    @TheMabinogiLife 4 роки тому +1

    Thank you! This was so fun.

    • @CLO3D
      @CLO3D  3 роки тому +1

      you are welcome

  • @MitchellPerryFashion
    @MitchellPerryFashion 2 роки тому

    Fantastic video! Thank you for sharing!

    • @CLO3D
      @CLO3D  2 роки тому

      Glad you enjoyed it!

  • @brunika51
    @brunika51 3 роки тому

    Can I apply some drawing? In case I wanted some floral broderie in a linen bag, but not like a pattern all over it

    • @CLO3D
      @CLO3D  3 роки тому +1

      Absolutely. Start with this video about Materials. ua-cam.com/video/LFtPds-QAWk/v-deo.html

  • @swellsy1
    @swellsy1 Рік тому

    Once you design a bag on the software does the software 'create' the instructions/pattern to make the bag? If not, is there separate software to use for the pattern process?

    • @CLO3D
      @CLO3D  Рік тому

      If you fully realize the design in CLO and upload to CLO-set it will generate a Tech Pack for you.

  • @kaopanha5090
    @kaopanha5090 3 роки тому

    excuse me how can I make it look straiten? because I follow you but my bag look flat after unstraigten?

    • @CLO3D
      @CLO3D  3 роки тому +1

      This has to do with the fabric that you apply. Whichever one you choose, make sure in the Physical Property Preset you choose "Trim Full grain Leather" This will stay stiff when you simulate.

  • @TheNSproject
    @TheNSproject 4 роки тому

    Nice vidéo! Thank you! How do I do to make the handle as straight and hard like you? Mine just fall down even after I strengthen them

    • @CLO3D
      @CLO3D  3 роки тому

      Did you apply strengthen and fold the Internal Line?

  • @kevintung9152
    @kevintung9152 3 роки тому

    How did you get the bag so solid? Mine collapses in on itself

    • @kevintung9152
      @kevintung9152 3 роки тому

      Never mind I didn’t use the right fabric lol

    • @CLO3D
      @CLO3D  3 роки тому

      😎

    • @kevintung9152
      @kevintung9152 3 роки тому

      @@PolishedTruth “Trim - Full Grain Leather”

  • @sophies6439
    @sophies6439 3 роки тому

    Can it make shoes as well?

    • @CLO3D
      @CLO3D  3 роки тому

      Absolutely!

  • @DerekFizzey
    @DerekFizzey 3 роки тому +5

    I- this is TOO FAST. like what... how do I know when to choose and freeze and strengthen and the particle distance and OMG HOW-

    • @limbotvperu6867
      @limbotvperu6867 3 роки тому +1

      slow down the video youtube has an opption

    • @CLO3D
      @CLO3D  3 роки тому +1

      Keep your Particle Distance higher so simulation will run faster. You can leave Strengthen on and keep the stiffness until you are finished. Use Freeze when you need to "anchor" another pattern piece. You can render with Strengthen and Freeze still on.

  • @maggiemattioni7762
    @maggiemattioni7762 4 роки тому

    I can not download the files from the link on clo-set - it only allows me to put in favourites not download.

    • @CLO3D
      @CLO3D  4 роки тому +1

      Hi Maggie, you can submit this issue through here: www.clo3d.com/contact

    • @maggiemattioni7762
      @maggiemattioni7762 4 роки тому

      @@CLO3D ok thank you, I just wondered if anyone else has had the same problem as every other file I can download apart from this - it is all greyed out in Clo set

    • @CLO3D
      @CLO3D  4 роки тому +1

      @@maggiemattioni7762 Sorry for the confusion - the link should be accessible now.

    • @JosineIsEr
      @JosineIsEr 4 роки тому

      @@CLO3D Hi, I can't download it either. It's greyed out.. Could you maybe update with a google drive link like with the beginner's guide?

    • @CLO3D
      @CLO3D  4 роки тому +1

      @@JosineIsEr This link has been updated, please try now.

  • @3dfashionincolor
    @3dfashionincolor 4 роки тому

    Thank you for this very informative video!!!

    • @CLO3D
      @CLO3D  3 роки тому

      Glad it was helpful!

  • @faithdaniel684
    @faithdaniel684 10 місяців тому

    Awesome

  • @ady7d77
    @ady7d77 2 роки тому

    can you show us how to print the templates in paper so i can make it real?

    • @CLO3D
      @CLO3D  2 роки тому

      you can export a PDF from Print Layout Mode. support.clo3d.com/hc/en-us/articles/115000565028--Mode-Print-Layout

  • @IraellChannel
    @IraellChannel 2 роки тому

    How do I make it come true ?

    • @CLO3D
      @CLO3D  2 роки тому

      What do you mean?

  • @aidengomes231
    @aidengomes231 4 роки тому

    This tutorial can be done in marvelous designer too?

    • @CLO3D
      @CLO3D  3 роки тому

      This is created specifically for CLO

  • @qwertyded
    @qwertyded 3 роки тому

    Thanks for this tutorial! You cool

    • @CLO3D
      @CLO3D  3 роки тому

      You're welcome.

  • @LUNACHECAGA
    @LUNACHECAGA 4 роки тому +1

    Interessante , mi piace,Grazie! È stato così divertente

    • @CLO3D
      @CLO3D  3 роки тому

      Sìì! Siamo così contenti!

  • @lynedwards2988
    @lynedwards2988 4 роки тому

    how are you "pinning" the handles to stay up??

    • @CLO3D
      @CLO3D  4 роки тому +3

      When you are on the Select/Move tool in the 3D window, hold down the "W" Key and click on an area. This will place a "pin" down. To remove the pin you can right click and choose delete or you can Hold "W" and click back on the pin to remove it.

  • @feelingcreative9833
    @feelingcreative9833 3 роки тому +1

    what software are you using sir?

    • @CLO3D
      @CLO3D  3 роки тому +1

      CLO 3D?

  • @anurimaprabhakar6080
    @anurimaprabhakar6080 4 роки тому

    How should I add the downloaded swatches to my library?

    • @CLO3D
      @CLO3D  4 роки тому

      You can check out the beginning of this video which shows how to add things to your library
      ua-cam.com/video/zYL3Im5XFHA/v-deo.html

  • @gionetdennis9140
    @gionetdennis9140 3 роки тому

    Whats the name of the software

    • @CLO3D
      @CLO3D  3 роки тому

      clo3d.com

  • @gloriareyes6556
    @gloriareyes6556 4 роки тому

    Awesome! What program are you using?

    • @CLO3D
      @CLO3D  4 роки тому +1

      Learn more at www.clo3d.com/

  • @MrGhalemin
    @MrGhalemin 2 роки тому

    Good sketch

    • @CLO3D
      @CLO3D  2 роки тому

      Thanks

  • @exploringrvdude7817
    @exploringrvdude7817 4 роки тому

    Too fast, I can't see what the menu items you're selecting.

    • @CLO3D
      @CLO3D  3 роки тому

      Try adjusting the playback speed of the video.

  • @Maths_Shorts_
    @Maths_Shorts_ 4 роки тому +2

    Clo
    I love you

    • @ahmed1824
      @ahmed1824 4 роки тому

      I am from Pk nice

    • @CLO3D
      @CLO3D  3 роки тому

      LOL. We love all our users!

  • @ivanjortiz8
    @ivanjortiz8 Рік тому

    If you want, you can go a bit faster. No problem =)

  • @elpacino5872
    @elpacino5872 2 роки тому

    👌🏻👌🏻

  • @antoniovoto
    @antoniovoto Рік тому

    You are very skilled in modeling, but you are too fast when performing actions with the right mouse button and it's hard to understand what you're doing.

    • @CLO3D
      @CLO3D  Рік тому

      Thank you for your feedback. We will keep it in mind for future videos

    • @antoniovoto
      @antoniovoto Рік тому

      thanks.
      @@CLO3D

  • @solodv00
    @solodv00 6 місяців тому

    Literally so many missed things that she does without an explanation

    • @CLO3D
      @CLO3D  6 місяців тому

      Hi. This tutorial can be a bit fast, but you can always pause, rewind, rewatch.
      :)

  • @Lifeinvillage2
    @Lifeinvillage2 Рік тому

    The fabric is falling apart after i stimulate, should i increase the particle distance[ i even strengthen it]. Please help

    • @CLO3D
      @CLO3D  Рік тому

      What do you mean by "falling apart"? Is it collapsing to the ground or are the seams splitting?

    • @Lifeinvillage2
      @Lifeinvillage2 Рік тому

      i want to design shinguard in clo 3d after creating front side, simulation just drop that piece on ground

    • @Lifeinvillage2
      @Lifeinvillage2 Рік тому

      please also make tutorial on designing shinguard with velcro straps