Wish i could have done same today. But unfortunately boat is not ready. Working on a small bar now and having a small brake from the sun since its bloody hot... 🥵
@@IRONCLADRC Ok, then it's even 5 degrees warmer at your place. These were the first reel warm days and not used to it yet since weather has been mostly 10-15 degrees lower. I really need to adjust to these conditions and also have to use medicine that make it a lot worse. But hè, every hour i put into it makes the end come sooner...
I'm running an average speed on ovals Total distance 1 mile 6 laps 46 mph Oxidean dominator 4s 2050kv Drained packed to 10% Average Temps motor 112, battery 135, esc 105 Average run time 78 seconds From what I've seen.. I don't think that is fast enough to be competitive. Must hone driver skills = drive more boats 😂
@@IRONCLADRC running single pack 4s Propping up was what I was about to do. Running an oxidean 4519..running super loose and dry.. So I'm a bit hesitant to throw on the next size I have which is an octura M447 Shortened Rudder.. Almost no drag.. 46 mph is what I'm getting as an average speed in completing the 1 mile.
@@IRONCLADRC ALWAYS.. That first run is so critical. In a situation like that when there is an unknown variable thrown into the mix. I do 1 lap untape check and retape.. About 4 or 5 times before I start any tuning. Balanced sharpened and ready to go. I'm looking to cut 12 seconds off my total time. 🤦♂️🤦♂️🤦♂️🤦♂️
I have one too, my favorite boat, man good driving it's quick.
Good stuff.. smooth as silk and flyin' on that water! 🚤💨BG4L
Yea B😎
3 blade seam smooth on monos crazy torque steer on riggers for me at least
Big B , thanks , it’s screaming !!
Just got my new bj24 and it's better than I thought. Yahooo
Smooth
Thanks, I just got the care package, thank you!
.... Is that 600 sandpaper on the bottom of the hull???
Wish i could have done same today. But unfortunately boat is not ready. Working on a small bar now and having a small brake from the sun since its bloody hot... 🥵
Tell me about it, it's 96°f today with the humidity, and it feels like 100+. No boating for me today
@@IRONCLADRC Ok, then it's even 5 degrees warmer at your place. These were the first reel warm days and not used to it yet since weather has been mostly 10-15 degrees lower. I really need to adjust to these conditions and also have to use medicine that make it a lot worse. But hè, every hour i put into it makes the end come sooner...
Tried to contact you via your listed email but it was returned. What is your preferred non-UA-cam contact please.
Face book is a good place to contact me.. ironclad rc
SCBG4L
I'm running an average speed on ovals
Total distance 1 mile 6 laps
46 mph
Oxidean dominator 4s 2050kv
Drained packed to 10%
Average Temps motor 112, battery 135, esc 105
Average run time 78 seconds
From what I've seen.. I don't think that is fast enough to be competitive.
Must hone driver skills = drive more boats 😂
Sounds like you need a higher kv
Motor or prop up a little bit with 4s wired in parallel
@@IRONCLADRC running single pack 4s
Propping up was what I was about to do. Running an oxidean 4519..running super loose and dry.. So I'm a bit hesitant to throw on the next size I have which is an octura M447
Shortened Rudder.. Almost no drag..
46 mph is what I'm getting as an average speed in completing the 1 mile.
@@doublefourz that m447 is gonna be awesome on that boat I've run that prop on mine! Just watch temps that first run especially the first run.
@@IRONCLADRC ALWAYS.. That first run is so critical.
In a situation like that when there is an unknown variable thrown into the mix.
I do 1 lap untape check and retape.. About 4 or 5 times before I start any tuning.
Balanced sharpened and ready to go.
I'm looking to cut 12 seconds off my total time. 🤦♂️🤦♂️🤦♂️🤦♂️