You know John... We put a lot of merit in what you recommend. Thanks for the installation video as well as your review. Of course I now have to consider doing the same to my Road King since they make a BIG difference in the ability of other drivers to see us! As always John, keep'em comin'!
Come on people, share this channel with everyone you know and let’s get JM that 100K sub plaque 🤘🏼 this channel blows everyone else out of the water for motorcycle content.
Great video as always, and congrats on reaching the point where parts manufactures want to work with you to showcase their stuff. Your hard work is paying off, now only if Trask will hit you up for a M8 turbo install that would be fun.
I added the front fang and rear fillers on my Ultra Limited they look awesome. Also I have to commend Ciro3D for standing by their lifetime warranty on the LEDs I've had some of the LEDs in my fillers and recently my fangs go out and called them up told them and no questions asked had replacements in the mail to me both times on the same day I called.
John that was just a awesome video. You really cracked me up at explaining about how the rear lights were harder to pop on and just to push harder. LOLOLOLLOL. Awesome. That made my day.
Love the way those lights look vs the custom dynamics. I’m definitely going to pick up a set front and rear for my 18 heritage. And the H-D layback LED brake light. Wish the bike came with all LED lighting from the factory instead of just the headlight and passing lights.
Thank you for the kind words Steve! Please be sure to use the link in John Maxwell's description when you purchase your set of Fang® Turn Signal Inserts!
Great info John, I recently upgraded my headlamp to LED, and passing lamps and turn signals to Ciro LED lighting. I really like the quality of Ciro’s products and how easy the installs are. It definitely increased my safety while riding, especially the new headlamp. Thanks brother!
Nice video. I use Ciro fang lights in my Roadking Special. Made a big difference. Also use the VisionX headlamp. Love the way they look and work. Dirty thumbs up!
Lighting can get crazy.!. I had a 12 SG with the custom Dynamics turn signal inserts and their load equalizer. I bought a 15 SGS and swapped the stock turn signals for the Custom dynamics.. left off the load equalizer.. Bought the CD magic strobes module... Then later I added the Harley brand underbag led lights... Not yet satisfied with my rear lighting, "I have been rear ended on a bike twice and in a vehicle another 4 times in my 38 years of driving and riding :( " I have a bad habit of stopping at traffic lights and stop signs :/ ... I have now added the Ciro Bag Blades with the duel color... That beast is lit up but good now...
I installed a set of Custom Dynamic in my 2018 1200 Custom housings. Changed the rear to Red LED and Clear covers. My BCM calibrated itself immediately.
Awesome video as always. I have the ciro Phone Mount with Charger. But I charge my phone, gopro batteries and iPad with it. I would recommend it! You make installation look so easy!! Thank you for the video sir.
Great info on the LED lights. John you mentioned the lameness of the horn. I have a 2018 Slim and hate the wimpy horn. Any chance you can do a video of better horn and it’s install?
I like the white LED turn/ run light because I can turn off the driving lamps off during the day. You get the same look but it makes the turn signal more visible when it comes on and turns amber. Try pushing the rubber gasket back with a screw driver it may make it a little easier to pop the light in.
Nice install video and the product looks pretty solid. Best yet is that they look great on your bike! Btw, your new ride looks awesome, I'm so happy that you were able to hook yourself up with that new comfy ride! 😎👍🤘
great video John, very useful info, I didn't know the dealer could make the turn signals brake lights on the 2018 Heritage, I will def have that done after I change to LEDs.
Pretty cool product. I use to run Custom Dynamic inserts on my bikes but I took them out because I actually prefer the old school look and vibe of the incandescent bulbs. 🤷♂️
I know this is about Ciro BUT and here comes the BUT Custom Dynamics makes the best in LEDs . They also make the load equalizer to stabilize the flash rate and the smart triple play module that has run /brake turn and brake flasher/ strobe with 10 selectable settings.They are made in America and also have a lifetime warranty.👍🇺🇸😎
Hi John nice trick with the Digital tech machine. I didn't know about that. I ended up upgraded my 2018 FLHCS LED turn signals and also got a Custom Dynamics triple play module that did give me Run, Brake, Turn, plus it added the strobe option to the lights. If i knew about the mod on the Digital tech machine i would still have had to pay the shop to do upgrade the BCM. I know some shops might do that for free if they were already working on your bike but some shops would charge for that. The module i got cost $100 Keep on upgrading your bike, i will take that info into accoiunt to help me decide what to do with mine
depending on the need for digital tech (DT) we usually don't charge. If you bought turn signals elsewhere and then brought the bike in to get flashed, yea I'm charging you. But if you're spending money, there's no reason to keep hitting your wallet! run brake and turn is way cooler than just brake turn, but you know. I also like having money in my pocket!
Hi John thanks for the reply. I also like having money in my pocket but my bikes just keep tearing holes in them.....Looking forward to more upgrades you are doing on your bike, keep'em coming, dam just tore another hole :)
I just purchased my ciro3d front and rear turn signals as well as my led headlight for my 18 Street Glide. I'll have to get my filler led lights at a later time as well as my led break light. $719 but well worth it.
At 8:54 - notice your center brake light kinda lags behind the LEDs. The LEDs come on & cut off fast, but not incandescents. You can replace the bulb in your center brake with an LED bulb and then all three will match, visually speaking. About $11 from superbrightleds.com
Need that headlight. Is that aftermarket? I just bought my first bike ever and it's a 2011 Kawasaki VN 900B classic, shiny black with lots of chrome. Love the lighting on this and looking for the wow factor. Thank you
I could’ve not been able to figure it out but there doesn’t seem to be a place to plug in the load equalizer with the Ciro module also installed. 2015 street glide special
Is there a way for DIY's to use a program for the rear turn signals, or does one half to go to a dealership to get the effect did within the shop computer?
Great video as always, I tried the tip about the turn signal indicator light flashing fast but the actual turn signal flashing normally with LED's. For some reason it did not work on my 2017 FXDB, not a big deal I have put up with it for months, just wondering if it you needed to do something different on Dyna's.
That’s odd. Ignition switch/run switch on. Hazards lights flash ten times and then turn them off should set everything correctly. Do you know if you had the run switch on? That’s the only thing I can think of.
@@TheHarleyTech Here is a short video of me running through the method ua-cam.com/video/QlBCTR_fZJs/v-deo.html. It could be that the bulbs that I have installed are really cheap, don't know if that matters.
Good video... I have the Ciro 3D LED Headlight. They have great products. During your video you mentioned how LAME the horn is... Do you know of a good replacement for the Horn?
I have an air horn sitting around that I haven't tried yet. I know some folks have installed them on 18+ softails, but I haven't. Since the ignition coil is where the horn used to be, I'm not sure what install/appearance would look like.
John Maxwell just gotta enjoy the good months when you can. I’m thinking I’m gonna start planning some winter vacations to warm states tho to ride. Your pre winter check list video really helped me out for this season. So thank you for that 👍
Great video as always! So glad I found this channel as I am new to owning a Harley and love the tips. Just installed on my 2019 Heritage Classic and they look great. Question: Anyway, I can adjust the lighting, or do I need to bring to my Harley Shop to make it a break/turn light?
Either the dealer can do what I did, or you can get a “triple play” from custom dynamics. The custom dynamics module can be installed in your garage pretty easy.
@@TheHarleyTech Cool thanks for the additional info. My local Harly dealer made the adjustment for me and I couldn't be happier with the look. Plus the additional brightness at is amazing.
I have custom dynamic on 18 low rider with chrome Bessel. The front turn signals have halo ring like a driving light. They also have a lifetime warranty. The difference is I didn't get mind for free. Sucks to be me.
Hi John I was wondering if u have any tips for me I have a sportster and I moved the coil and ignition to the middle of the jugs/heads and in about 6 months of riding the ignition fell apart and the key has really deep grooves. sportster is 2015 if it matters.
Hey John love the videos quick question with all the upgrades you did why didn’t you just buy a ultra? Bike looks great thanks for your unprofessional help
I would like to install auxiliary driving lamps on my ROAK KING SPECIAL 2018,the PNE catalogue has fork mount with turn signal relocation. I have to wire the turn signal lights? Plus wiring has to change?thanks
Does Ciro sell a turn signal relocation frame mount thing? The thing that holds the two turn signal indicators underneath your brake light? And if they do, what's the part number and can it fit a LRS? Like the '23?
HA, I see what you did there!😂 oh and by the way: damn it John, why do your videos have to be soo informative bro.. Now I have to decide between Ciro 3D and Custom Dynamics Probeams...🤔🙄🤔🤔
I like most of the Ciro 3D products but I gotta say I'm not a huge fan of the lighting. You guys should check out the Rogue Rider Industries inserts. Insanely bright and lifetime warranty. As always awesome video man, stoked to have more of a traditional JM video this week 🤟🏼
Hey John, can they be installed upside down to better match a layback tail lamp? Seems like it'd look off if the tail lamp is angled one way and the turn signals are angled the other way...
I just installed these on my 2018 RGS. The rears only have the turn function working, not the run or brake even though it says so on the box. Is it not supposed to have all three functions? Or am I doing something wrong?
Got to love the Digital Tech pc.. you used to have to buy the dam module to make them brake lights also ,,i have one on my wife’s bike ,i forget but i think it was $60 bucks,,,
John, I have a 2017 Low Rider, and for some reason the indicator is still hyper flashing. I followed your recommendation, but no luck. Why do you think this is happening ?
Hi John. I have the exact same bike in red iron . I installed these on my bike and my nuckel head local HD Shop said that they could not be made into brake + turn signals. Can you please tell me what the up grade is so I can school them? Thanks.
I believe it will work, but I'm not 100%. It would make sense that it would work on all 14 and later year models, but I wasn't sure enough to say so in the video.
HEY! I Just got my bag blade kit (deliverd and i installed) came with stickers --- but no micro cloth :( lol -- I put you and Sandavol for -Ciro 3 D who sent me? ...and Hell Yeah the Bag Blades Rock! FYI I had to edit this comment more than 10 times! I was not using any negitive comment. ... I am not happy to comment anymore if this is a thing? Let us know.
I wish someone could tell me what to do with the 2018/2019 breakout turn signals flashing fast on the dash only ( the green signal on dash) Is it a setting in the shop computer that could fix it John?? This only happened when front LED turn signals where changed
Ok...so heres what I dont get..I have a 2013 sportster 1200c and just installed the Probeam puck lights front and back. 1156 rear...1157 front. But now the red key comes on the dash and am told I need a load equalizer to keep the red key from coming on. Heres the thing...I also have an LED head lamp and tail lamp without issue.
Hey John, I have just got the 1156 versions of these and they just won't work in the front left signal housing on my 18 Ultra Limited. The stock halogen bulb works, and the LEDs all work in any of the other 3 signals, but none will work in the front left housing. Any idea what could be causing this?
The front left should be an 1157. Are the little nuns on the sides of the socket the same for the stock bulb and the LED? They should be slightly offset from each other to fit into the housing.
You know John... We put a lot of merit in what you recommend. Thanks for the installation video as well as your review. Of course I now have to consider doing the same to my Road King since they make a BIG difference in the ability of other drivers to see us! As always John, keep'em comin'!
Come on people, share this channel with everyone you know and let’s get JM that 100K sub plaque 🤘🏼 this channel blows everyone else out of the water for motorcycle content.
We already have these on our 2016 Road Glide Special. BEST LIGHTS EVER!
Ciro 3D products are excellent quality, very easy to install and their LEDs are very bright! Great products!
Great video as always, and congrats on reaching the point where parts manufactures want to work with you to showcase their stuff. Your hard work is paying off, now only if Trask will hit you up for a M8 turbo install that would be fun.
I added the front fang and rear fillers on my Ultra Limited they look awesome. Also I have to commend Ciro3D for standing by their lifetime warranty on the LEDs I've had some of the LEDs in my fillers and recently my fangs go out and called them up told them and no questions asked had replacements in the mail to me both times on the same day I called.
John that was just a awesome video. You really cracked me up at explaining about how the rear lights were harder to pop on and just to push harder. LOLOLOLLOL. Awesome. That made my day.
Love the way those lights look vs the custom dynamics. I’m definitely going to pick up a set front and rear for my 18 heritage. And the H-D layback LED brake light. Wish the bike came with all LED lighting from the factory instead of just the headlight and passing lights.
Thank you for the kind words Steve! Please be sure to use the link in John Maxwell's description when you purchase your set of Fang® Turn Signal Inserts!
Great info John, I recently upgraded my headlamp to LED, and passing lamps and turn signals to Ciro LED lighting. I really like the quality of Ciro’s products and how easy the installs are. It definitely increased my safety while riding, especially the new headlamp. Thanks brother!
John, those Ciro Lights are a big improvement
Great vid, great to see manufacturers thinking of the average joe (like myself) being able to fit at home, great job John!
great video and I do appreciate your honesty about the rears being a little more difficult to insert
I like them! So glad I didn't mail my letter to Santa yet. As always have a great day John and and Thanks!
Tell Santa to use the links in the description, haha
You need to make MORE videos man, you way more fun to hang out with than some of the "other guys"! Haha
Ciro is definitely quality stuff. Have many of their products on my RGU.
Put these on my 17 Road Glide, easiest install ever. Bright, work well, thx for the vid
Gunna have to check into these lights for 2012 fat bob.
On my '13 streetglide I used a Custom Dynamics load equalizer along with the magic strobes. Worked great.
Well done John, love your sense of humour mate 👍👍👍
Nice video. I use Ciro fang lights in my Roadking Special. Made a big difference. Also use the VisionX headlamp. Love the way they look and work. Dirty thumbs up!
Lighting can get crazy.!. I had a 12 SG with the custom Dynamics turn signal inserts and their load equalizer. I bought a 15 SGS and swapped the stock turn signals for the Custom dynamics.. left off the load equalizer.. Bought the CD magic strobes module... Then later I added the Harley brand underbag led lights... Not yet satisfied with my rear lighting, "I have been rear ended on a bike twice and in a vehicle another 4 times in my 38 years of driving and riding :( " I have a bad habit of stopping at traffic lights and stop signs :/ ... I have now added the Ciro Bag Blades with the duel color... That beast is lit up but good now...
I installed a set of Custom Dynamic in my 2018 1200 Custom housings. Changed the rear to Red LED and Clear covers. My BCM calibrated itself immediately.
Thanks John. I'LL break it to them easy. Love your Tech videos. Keep em coming.
Cool Vlog on the led lights. Thanks John. Be Cool and Ride Safe.🇺🇸🏍
Awesome video as always. I have the ciro Phone Mount with Charger. But I charge my phone, gopro batteries and iPad with it. I would recommend it! You make installation look so easy!! Thank you for the video sir.
installation for these are that easy. even an unprofessional could do it. wait...
John Maxwell ....Awe I see what you did!! Lol
I think you should push for some ciro 3D Highway pegs with you logo on them!!! That would be cool! They did it for Adam Sandoval..
Great info on the LED lights. John you mentioned the lameness of the horn. I have a 2018 Slim and hate the wimpy horn. Any chance you can do a video of better horn and it’s install?
I like the white LED turn/ run light because I can turn off the driving lamps off during the day. You get the same look but it makes the turn signal more visible when it comes on and turns amber. Try pushing the rubber gasket back with a screw driver it may make it a little easier to pop the light in.
It wasn’t the gasket, it was just that tight of a fit.
Better tight than loose. Good video keep them coming thanks John.
true that
Great lights and amazing visibility. I do believe the plastic base on the electrical connection is not the best quality out there.
Nice install video and the product looks pretty solid. Best yet is that they look great on your bike! Btw, your new ride looks awesome, I'm so happy that you were able to hook yourself up with that new comfy ride! 😎👍🤘
I have the Ciro panel fillers and center brake light on my 18 Ultra they are bright as hell
great video John, very useful info, I didn't know the dealer could make the turn signals brake lights on the 2018 Heritage, I will def have that done after I change to LEDs.
Another badass video. Thanks for rocking the BillyLines sticker.
you know it man!
Thanks JM, they really look and function very well, a good upgrade. 👍🏾
Yeah build quality is heavy duty ,cool! Thanks bro, have nice day
Pretty cool product. I use to run Custom Dynamic inserts on my bikes but I took them out because I actually prefer the old school look and vibe of the incandescent bulbs. 🤷♂️
Looks great! I want to get them for my 2018 Road King Special.
I know this is about Ciro BUT and here comes the BUT Custom Dynamics makes the best in LEDs . They also make the load equalizer to stabilize the flash rate and the smart triple play module that has run /brake turn and brake flasher/ strobe with 10 selectable settings.They are made in America and also have a lifetime warranty.👍🇺🇸😎
Guess next upgrade your making is a new horn. Not sure if any of my lights on my 19 FLTRXS is digital but if not I'd like to upgrade them.
Thems stickers on the bike must all be other vloggers. I saw block and bike& bird
Hey John thank you way cool vlog,those lights look awesome 👍😃
06:28 yeah, that's what she said..... sorry I had too
LoL you know that why he cracked himself up. Cause all us guy thought the same thing. We are so childish lol
I couldn't decide if I should leave me laughing in, I'm glad you got it!
@@TheBlueBikeDoyle yeah that wasn't planned at all .......
@@LoudValves lol
@@TheHarleyTech glad you did..... keeps the content consistent, down to earth, and fun. Love your vids bro, keep up the awesome work!
Hi John nice trick with the Digital tech machine. I didn't know about that. I ended up upgraded my 2018 FLHCS LED turn signals and also got a Custom Dynamics triple play module that did give me Run, Brake, Turn, plus it added the strobe option to the lights. If i knew about the mod on the Digital tech machine i would still have had to pay the shop to do upgrade the BCM. I know some shops might do that for free if they were already working on your bike but some shops would charge for that. The module i got cost $100
Keep on upgrading your bike, i will take that info into accoiunt to help me decide what to do with mine
depending on the need for digital tech (DT) we usually don't charge. If you bought turn signals elsewhere and then brought the bike in to get flashed, yea I'm charging you. But if you're spending money, there's no reason to keep hitting your wallet! run brake and turn is way cooler than just brake turn, but you know. I also like having money in my pocket!
Hi John thanks for the reply. I also like having money in my pocket but my bikes just keep tearing holes in them.....Looking forward to more upgrades you are doing on your bike, keep'em coming, dam just tore another hole :)
I just purchased my ciro3d front and rear turn signals as well as my led headlight for my 18 Street Glide. I'll have to get my filler led lights at a later time as well as my led break light. $719 but well worth it.
They look great John!
Always love The effort you put in man. Ride safe out there brotha
Thanks, Jack!
At 8:54 - notice your center brake light kinda lags behind the LEDs. The LEDs come on & cut off fast, but not incandescents. You can replace the bulb in your center brake with an LED bulb and then all three will match, visually speaking. About $11 from superbrightleds.com
That’s one badass bike 😍🏍
Thanks John great video just ordered a set for 2017 SGS.
awesome!
You just sold two pair! Thanks!
If it doesn’t go in try harder- That’s what she said. 😂😂
Are these brighter than custom dynamics?
Yup have these love em!!!!
Need that headlight. Is that aftermarket? I just bought my first bike ever and it's a 2011 Kawasaki VN 900B classic, shiny black with lots of chrome. Love the lighting on this and looking for the wow factor. Thank you
I could’ve not been able to figure it out but there doesn’t seem to be a place to plug in the load equalizer with the Ciro module also installed. 2015 street glide special
Is there a way for DIY's to use a program for the rear turn signals, or does one half to go to a dealership to get the effect did within the shop computer?
Great video as always, I tried the tip about the turn signal indicator light flashing fast but the actual turn signal flashing normally with LED's. For some reason it did not work on my 2017 FXDB, not a big deal I have put up with it for months, just wondering if it you needed to do something different on Dyna's.
That’s odd. Ignition switch/run switch on. Hazards lights flash ten times and then turn them off should set everything correctly. Do you know if you had the run switch on? That’s the only thing I can think of.
@@TheHarleyTech Here is a short video of me running through the method ua-cam.com/video/QlBCTR_fZJs/v-deo.html. It could be that the bulbs that I have installed are really cheap, don't know if that matters.
Just a heads up your video didnt come up in my sub's love your videos I've watched them all!
do you have the bell chosen and "receive all notifications?"
John your viewers did try harder and it went in!😜
So do you like Ciro3D better that Competition Dynamics
Looks awesome great video like always ! GODBLESS
can´t you get the middel one in led on the rear??? the crome was the right choice for your bike matches superb on the front
regards
Sören
Good video... I have the Ciro 3D LED Headlight. They have great products. During your video you mentioned how LAME the horn is... Do you know of a good replacement for the Horn?
I have an air horn sitting around that I haven't tried yet. I know some folks have installed them on 18+ softails, but I haven't. Since the ignition coil is where the horn used to be, I'm not sure what install/appearance would look like.
Hi John
You can buy the stock globes in led just sayin
I love how a sticker on your toolbox says Hipe GSUS 😂
when I change the headlight on my SGS it will be the Ciro headlight they are one bright light
Man I envy the south. November, still on the bike. Here in northern Ohio. Mine is winterized until March at best.
I couldn't do it man. No way. I don't know how anyone deals. I guess it might be ok if you have a snow mobile or something.
John Maxwell just gotta enjoy the good months when you can. I’m thinking I’m gonna start planning some winter vacations to warm states tho to ride. Your pre winter check list video really helped me out for this season. So thank you for that 👍
Great video as always! So glad I found this channel as I am new to owning a Harley and love the tips. Just installed on my 2019 Heritage Classic and they look great. Question: Anyway, I can adjust the lighting, or do I need to bring to my Harley Shop to make it a break/turn light?
Either the dealer can do what I did, or you can get a “triple play” from custom dynamics. The custom dynamics module can be installed in your garage pretty easy.
@@TheHarleyTech Cool thanks for the additional info. My local Harly dealer made the adjustment for me and I couldn't be happier with the look. Plus the additional brightness at is amazing.
Looks Good. I want to swap mine out.
Thankyou for this info John! 👍👌
I have custom dynamic on 18 low rider with chrome Bessel. The front turn signals have halo ring like a driving light. They also have a lifetime warranty. The difference is I didn't get mind for free. Sucks to be me.
the chrome part is separate from the custom dynamics insert, though. Right?
John Maxwell Well I have custom dynamics on my 18 FLTRU that I took off my 17 FLTRX. just a lense and the leds. Swapping to these. Much better look.
How many John Maxwells does it take to change a lightbulb?
now I wish I had shot and edited this to need 4 of me. 1 of me changing each bulb out...Look for that version in the future!
Hi John I was wondering if u have any tips for me I have a sportster and I moved the coil and ignition to the middle of the jugs/heads and in about 6 months of riding the ignition fell apart and the key has really deep grooves. sportster is 2015 if it matters.
Hi...i hv 2023 street glide st (asian spec) n the front turn signal actually using the 1156 socket. What i cn do to have it running n turn light?
I keep popping the passing lights on my springer do you know if this is a common thing I think it has to do with vibration
Could you post the manufacture’s part numbers please?
Can u use custom dynamics magic strobe with any LEDs or do u have to use theres I'm on a 2014 road king
Dude the headlight is killin me! Hahahaha
Hey John love the videos quick question with all the upgrades you did why didn’t you just buy a ultra? Bike looks great thanks for your unprofessional help
I would like to install auxiliary driving lamps on my ROAK KING SPECIAL 2018,the PNE catalogue has fork mount with turn signal relocation. I have to wire the turn signal lights? Plus wiring has to change?thanks
Does Ciro sell a turn signal relocation frame mount thing? The thing that holds the two turn signal indicators underneath your brake light? And if they do, what's the part number and can it fit a LRS? Like the '23?
HA, I see what you did there!😂 oh and by the way: damn it John, why do your videos have to be soo informative bro.. Now I have to decide between Ciro 3D and Custom Dynamics Probeams...🤔🙄🤔🤔
Did you flash your spots to run on high and low beams. I also had my CB flashed back to pre-13 where the PTT is i the left side.
I like most of the Ciro 3D products but I gotta say I'm not a huge fan of the lighting. You guys should check out the Rogue Rider Industries inserts. Insanely bright and lifetime warranty.
As always awesome video man, stoked to have more of a traditional JM video this week 🤟🏼
Hey John, can they be installed upside down to better match a layback tail lamp? Seems like it'd look off if the tail lamp is angled one way and the turn signals are angled the other way...
they can be installed "upside down" if you'd rather.
I just installed these on my 2018 RGS. The rears only have the turn function working, not the run or brake even though it says so on the box. Is it not supposed to have all three functions? Or am I doing something wrong?
Thanks for the tip, that annoying fast blinking dash indicator is now only a memory👍🇸🇪
awesome, glad that helped ya out!
Thx - good review and advise as usual...
How would you rate these compared to Custom Dynamics Genesis 4?
Got to love the Digital Tech pc.. you used to have to buy the dam module to make them brake lights also ,,i have one on my wife’s bike ,i forget but i think it was $60 bucks,,,
that sounds about right.
John, I have a 2017 Low Rider, and for some reason the indicator is still hyper flashing. I followed your recommendation, but no luck. Why do you think this is happening ?
Are the turn signal benzals plastic or metal? Thanks
Hi Tanker, I apologize for my earlier response, I just clarified with the design team and it is in fact a metal bezel. Thank you!
Thank you.@@ciro3d_goldstrike3d
@@jslots2 please see revised comment, it is a metal bezel. Thank you!
Hi John. I have the exact same bike in red iron . I installed these on my bike and my nuckel head local HD Shop said that they could not be made into brake + turn signals. Can you please tell me what the up grade is so I can school them? Thanks.
I mean, simple change in the "BCM customization" portion, but don't go telling them that I said they're knuckleheads!
Look great
Hey John, where do I find your decals?!?! My box has a naked spot next to some of Sandoval's stickers. Gotta fix that!
What is the oldest model u can make the rear turn signals brake lights as well? I have a 2015 road king FLHR.
I believe it will work, but I'm not 100%. It would make sense that it would work on all 14 and later year models, but I wasn't sure enough to say so in the video.
Yes it worked, just had my local deal do it for me today. Thanks for the help.
HEY! I Just got my bag blade kit (deliverd and i installed) came with stickers --- but no micro cloth :( lol -- I put you and Sandavol for -Ciro 3 D who sent me? ...and Hell Yeah the Bag Blades Rock! FYI I had to edit this comment more than 10 times! I was not using any negitive comment. ... I am not happy to comment anymore if this is a thing? Let us know.
I wish someone could tell me what to do with the 2018/2019 breakout turn signals flashing fast on the dash only ( the green signal on dash) Is it a setting in the shop computer that could fix it John?? This only happened when front LED turn signals where changed
That’s the hazards on and flashing for 10 times that I talked about in the video.
so why does a 20k dollar bike not come with these stock instead of light bulbs from the 70s only harley
Ok...so heres what I dont get..I have a 2013 sportster 1200c and just installed the Probeam puck lights front and back. 1156 rear...1157 front. But now the red key comes on the dash and am told I need a load equalizer to keep the red key from coming on. Heres the thing...I also have an LED head lamp and tail lamp without issue.
Hey John, I have just got the 1156 versions of these and they just won't work in the front left signal housing on my 18 Ultra Limited. The stock halogen bulb works, and the LEDs all work in any of the other 3 signals, but none will work in the front left housing. Any idea what could be causing this?
The front left should be an 1157. Are the little nuns on the sides of the socket the same for the stock bulb and the LED? They should be slightly offset from each other to fit into the housing.
@@TheHarleyTech Should have mentioned it's an international model, so 1156 all round.
If need be, how difficult is it to remove them ..being it was difficult to snap them into place....
Shouldn’t be too bad. There a slot just like the stock ones to fit a screwdriver in.