Working Principle of Chiller Plant | Animation | English
Вставка
- Опубліковано 6 вер 2024
- In this video we have explained about the water cooled chiller plant basic working principle.
We have created this video with animation So you can understand easily.
Please Subscribe and Support our channel.
Like and Share the video.
Ask if you have any doubt in the comments section.
AMAZING!! thank you for the quick informative video! much appreciated
Thank you. I'm glad you liked it.
Like the animation except the mistake of the flow. The hot water exiting the condenser should fall from the top pipe down not the bottom pipe up. Other than that good and informative
Hii brother
Can make one video on district chiller.
Your videos are very useful and easy to understand in a simple way 🙂
Thank-you
Thanks good video nice PervaizIqbal from Karachi Pakistan
Thank you 😊
G pervaiz Bhai 💖kise ho
Thank you sir from 🇧🇩
You are welcome.
Which part would output/emit hot air (due to the process, if there is) into the environment? Is it the cooling tower? and would such cooling tower be mouted on top of the building roof?
khí nóng có thể đc tận dụng qua bộ làm nóng nước ( nghiên cứu khoa học )
Great
Thank You 😊
This very good video havc system traubleshooting good
Yes, thank you 😊
Do like to share this informative vide please.
👍😊👍
Sir..just asking..I stop the AHU sistem..do i need to stop the chiller water pump?
In some HVAC systems, the chilled water pump may serve multiple AHUs. If turning off the AHU means that no cooling is required in any part of the building, it may be reasonable to turn off the chilled water pump to save energy. However, if there are other areas that still require cooling, you should keep the chilled water pump running.
ua-cam.com/video/vtVBpEzApOE/v-deo.htmlsi=QntzIsS3vM68329l
from chem aqua, nice vids
Thank You Chem Aqua!
why does this system need a cooling tower if it already has a chiller. Seems that the cooling tower only contributes to cooling the water by 5 degrees, a marginal contribution.
The Chiller is using the water from Cooling Tower to Cool down the temperature of the Refrigerant.
In Air Cooled Chiller, the chiller using Air to cooled down the Refrigerant Temperature.
So, Cooling Tower is much important Component in a Chiller system.
How Cooling tower works and How the water from the Cooling tower is used in the Chiller these are explained in the previous video.
The link is below please watch.
Cooling Tower Working Principle
ua-cam.com/video/GdFuAA68Pw0/v-deo.html
Chiller Working Principle
ua-cam.com/video/HAxv0T3NVe4/v-deo.html
Chiller Working by Balloon Experiment
ua-cam.com/video/tPEjYj-xiVM/v-deo.html
What will happen if there is no Cooling Tower
ua-cam.com/video/IhfvLBI1VMQ/v-deo.html
ua-cam.com/video/vtVBpEzApOE/v-deo.htmlsi=QntzIsS3vM68329l
Al-Molhaq company for HVAC solutions
👍👍👍
Thank you sir nice video
Most welcome 😊
Thank you so much
Thank you and keep support.
ua-cam.com/video/vtVBpEzApOE/v-deo.htmlsi=QntzIsS3vM68329l
1:45 flow through the "Condenser Water Pump" seems backwards.
Yeah, that's your correct. I have already mentioned in the pinned comment. To keep the animation simple I did like that.
Very niece sir
Thank you!
Brother which software used in this video image. Please tell me ❤
I'm using wondershare Filmora for video editing and Animation and Sketchbook for image editing.
ua-cam.com/video/vtVBpEzApOE/v-deo.htmlsi=QntzIsS3vM68329l
How to find
Efficiency
Approx
And delta T of cooling tower and chiller???
Do you need the industrial chiller?
Nice video 👍
Thank you 😊 Please keep support.
ua-cam.com/video/vtVBpEzApOE/v-deo.htmlsi=QntzIsS3vM68329l
Good bro
Thank you bro
ua-cam.com/video/vtVBpEzApOE/v-deo.htmlsi=QntzIsS3vM68329l
thank you so much sir 👍
Thank you and please keep support 😊😊
ua-cam.com/video/vtVBpEzApOE/v-deo.htmlsi=QntzIsS3vM68329l
U didn't mention what goes on inside the chiller between the evaporator and condenser
The Refrigerant is going inside the chiller between evaporator and condenser.
I have explained this in the chiller working principle video.
The link is here
Chiller Working Principle
ua-cam.com/video/HAxv0T3NVe4/v-deo.htmlsi=AT5TjcffolLWGnig
ua-cam.com/video/vtVBpEzApOE/v-deo.htmlsi=QntzIsS3vM68329l
Thank you so much sir 😊
Thank You So much. Keep support and keep watching for new videos.
@@zebralearningsenglish-pn6fl ua-cam.com/video/itFtIRzjW_I/v-deo.html
ua-cam.com/video/vtVBpEzApOE/v-deo.htmlsi=QntzIsS3vM68329l
I Think direction flow for suction and discharge is wrong. thanks
Yeah, that's I already mentioned in the comments. For the design, I changed that. However, the working principle is the same.
ua-cam.com/video/vtVBpEzApOE/v-deo.htmlsi=QntzIsS3vM68329l
Keep growing brother ❤
❤ Please keep support.
ua-cam.com/video/vtVBpEzApOE/v-deo.htmlsi=QntzIsS3vM68329l
R134a refrigerant chiller plant section pressure???
The suction pressure can vary depend on the design and load.
Suction pressure should be 30-40psig and
Discharge pressure should be 140-180psig
ua-cam.com/video/vtVBpEzApOE/v-deo.htmlsi=QntzIsS3vM68329l
How does water go to cooling tower from condenser witout pump
Actually the condenser water pump is pumping the water from chiller to cooling tower.
The chilled water pump is pumping the water from chiller to AHU.
The one pump is doing the both jobs.
In some of the chiller plant we can see two pumps called Primary pump and secondary pump.
Primary pump is used to pump the water to chiller and secondary pump is used to pump the water to AHU or cooling plant.
But in some of the plants only primary pump is enough to pump the water to chiller and AHU or Cooling tower.
Here I have mentioned primary pump chiller plant.
Thank you asking your doubts.
If you need more clarification please don't hesitate to ask.
@@zebralearningsenglish-pn6fl please correct in the animation also inlet
I think inlet is from downside and outlet is abov
@@zebralearningsenglish-pn6fl ok thanks
Thanks for letting me know. Actually I know that already. But I wanted to keep the pump in horizontal position that's why I made this animation like this.
THANKS
You're welcome!
ua-cam.com/video/vtVBpEzApOE/v-deo.htmlsi=QntzIsS3vM68329l
Chillers with AHU doesn't make sense to me! Why not just use AC and put the evaporator in the AHU?
I've seen some buildings that don't have the AHU but the chiller's cold water goes into the building and special radiators with blowers cool down the interior.
It's based on the size of the area where we want to cool down. If the area is small, we can use FCU which is like AHU but small in size. FCU uses the chilled water from chiller and blows the cooled air. but, for the largest areas, AHU is the efficient one to cools down the room temperature.
ua-cam.com/video/vtVBpEzApOE/v-deo.htmlsi=QntzIsS3vM68329l
❤
❤️
ua-cam.com/video/vtVBpEzApOE/v-deo.htmlsi=QntzIsS3vM68329l
❤❤❤
❤❤❤
ua-cam.com/video/vtVBpEzApOE/v-deo.htmlsi=QntzIsS3vM68329l
The pump is on the wrong side because the suction of the pump is horizotal and the pump is discharge pump is on top.
Yeah, I wanted to keep the pump in Horizontal direction only. That's why I designed like this. Thank you for letting me know.
ua-cam.com/video/vtVBpEzApOE/v-deo.htmlsi=QntzIsS3vM68329l
Which program its that
It's wondershare filmora to make animation and video editing.
ua-cam.com/video/vtVBpEzApOE/v-deo.htmlsi=QntzIsS3vM68329l
Where is the Inlet water coming from ? Is there a continuous flow of inlet water? I’m confused
The water entering the cooling tower at 35deg C where is that coming from?
The chilled water circulates inside the pipelines.
But when there is a need for water due to water leakages, the water will be added from the makeup tank.
But how did the water get into the chiller in the first place that’s what I don’t understand
Where did the water going into the evaporator to produce the chilled water come from? Is there a tank in the AHU that is sending water to the chiller?
I understand the closed loop but the video didn’t really discuss how the water got in there in the first place
But how did the water get into the chiller in the first place that’s what I don’t understand
Where did the water going into the evaporator to produce the chilled water come from? Is there a tank in the AHU that is sending water to the chiller?
I understand the closed loop but the video didn’t really discuss how the water got in there in the first place
Now I can understand your question. There will be a tank called Makeup tank. From that tank, a pump is connected to the pipeline of the chiller. From that tank, water will be filled throughout the chiller pipeline first. Then the water continues to circulate in a closed loop. If there is any leakage of water in the chiller pipeline. From the makeup tank, the water is again added to the chiller pipeline through the pump.
Job v dedo yar 😢knowledge ke sath sath😂😂😂
How our heart working flow blood
I can explain, bro but this channel is only for HVAC and Electrical content.
A animação está errada. Fluxos de água de condensação e gelada.
Water flow is going the incorrect direction into both pumps and into the cooling tower.
Can you please explain?
I have checked it's gong in correct direction.
The inlet water for cooling tower must in the top 35 c.
Then the outlet must be in the bottom of the cooling tower 30 c ., and so on for the AHU.
Yeah, I checked now. You're correct the inlet for cooling tower should be at top and outlet should be at bottom.
Thank you for letting me know.
The direction is wrong it’s supposed to go in 12 to 6 .. not 6 to 12
@@Dirtydollars020 6 ºC to 12 ºC is the correct one. The chiller will send the chilled water to the AHU and AHU will use that water and sends out at 12 ºC.
Water flow direction is not correct
The flow direction is correct. Only the inlet and outlet position is wrong. That I already mentioned it. That's for the design I changed that.
Next time it will be perfect.
Thanks for your comment.
ua-cam.com/video/vtVBpEzApOE/v-deo.htmlsi=QntzIsS3vM68329l
You would like to work in Oman?
Thank you for considering me for the opportunity in your company. I appreciate the offer, but at the moment, I've recently been promoted in my current role, and my commitments here are a priority. I'm also deeply passionate about teaching, which is why I dedicate time to creating educational HVAC content on my UA-cam channel. While I don't have extensive practical experience, my strength lies in theoretical understanding. Unfortunately, relocating isn't feasible for me right now. I hope you understand, and I'm grateful for the offer.
Hello
@@nickyotieno9255 Hi
Suction and Discharge is incorrect
To make the pump horizontal position I designed like this.
This connection was wrong
Great