The "Sledski" Collapsible Smitty Sled
Вставка
- Опубліковано 8 лип 2024
- A look at my "Sledski", a Smitty sled I built able to be quickly disassembled and stashed in my small trucks limited space. Adding skis to a sled makes pulling it out to the fishing spot almost effortless!
- Спорт
THAT is not only one cool idea and a well-built machine, but an incredibly well-made educational video. Nice work, NoDak Boy. Thank you for sharing.
What a cool concept. Thanks for sharing.
Your equipment set ups whether Kayak or Ice fishing sled are excellent, thanks for sharing your ideas.
I know this has been up for a while, but I made this a month or so ago and it works really well! Thanks so much for willingly sharing your ideas and builds. Really enjoy the channel- Thanks!
Without a doubt the best Smitty seld build I've seen. You deserve an ice cold beer man. Cheers!
Thanks your ideas are very helpful. This would help on winter camping as well.
Hey that's an awesome design you created
I just got a Jetsled XL with winter camo and I can't wait to modify it I'm go a different route and add wear bar kit to the bottom of mine and build a wheeled platform for mine to sit in for summer use
Thanks for showing us your build !
Nicely thought out design.
Great build. Gave me some ideas. Thanks!!!
Good job great craftsmanship
That's nicely done. Thanks for sharing
Sweet build. Nicely done.
Quality build, nice job. Thanks
this is exactly what the setup i am building now, but i have a setup for 2 sleds, one big one for pop up and gear, and other for light gear., the old one i have is using wood and it works but just heavy, very good video.
NICE AND CLEAN! GOOD JOB AND THANX FOR SHARING.
That's one cool looking sled !!
For all the wonky sled mods I've seen, this is the most light, clean and efficient version yet. Well done.
Thanks! I built it with the goal of being able to break it down and fit it in the bed of my ranger with the tonneau cover on.
Excellent . Best one I've seen .
Very smart build, I like it!
Thanks so much for this video. That is a really nice design.
One of the best smithy sleds on video. Thank you. Db
By far the best one I’ve seen made
I just built one last weekend, its amazing. 100 lb shanty and auger it pulls with one finger.
great looking sled dude !
Great ideas, thanks.
Awesome design man!
This is perfect, light and easy!
Nice build! Thanks for posting this!
Excellent design
Excellent!! Thank You 🙏. Really this is special !!
Was thinking of doing something similar to this, for my snowmobile to tow. Thank you for proof of concept and finished product, my differences will be an fixed tow bar so it doesn't smash me.
Great work!
I want to build something similar to sit my older 2 person clam flip over on but to be pulled by a snow machine. The older clams have a very shallow sleigh and it gets buried with slush. Thanks for the fantastic idea
Nice, thanks for show your set up. Hopefully we be getting some ice fishing videos soon. Stay safe out there
Awesome sled mod Brother!
Who would dislike this video, sheesh! Thanks for sharing! I will never ice fish in Alabama, but still fun to watch this video.
Jealous people with 0000000 talent. LoL
Maybe they think the lighting is bad, or they want to see his face when he's talking, who knows??? lol
Love your videos ! You are the man.
Great ideas generated and incorporated into this build! I’d do mine very similar!
wow awesome ... well done great ideas thank you
Absolutely love it great idea 👍😉
Excellent video.. thanks for sharing..!
Looks like fun!
nicely done!
Good idea. Thanks for sharing.
One of the best I have ever seen
I’ve had it a few years now and it’s held up great! I did reconfigure it so that the sled is moved over to one side and the shack sits next to it directly on the bars to clear some room in the sled. I just pulled it about a mile over 6” of snow the other day and didn’t even break a sweat!
very nice build man right on
This is exactly ho I want to do my super sled but I will use pvc pipe instead of aluminium. Great vid!!
Pretty slick and ingenious.
I'm just really glad I don't need one here in the South!
Nice job!
I never thought of doing something like this, the reduced friction must be substantial, thanks for sharing!
If there’s any snow on the ground the skis make a huge difference! It’s comparable to pulling the normal sled on bare ice, once it’s moving it takes very little effort to keep pulling it along.
Nice looking sled.
Genius!
Outstanding!
Thanks! I ended up moving the sled over to one side of the bars, that way I can set the shack next to it instead of it taking up space in the sled.
Very nice! I will build one.
And I thought watching you fish was pretty amazing! Wow, you are quite talented and skilled. Can’t wait to see some smallies coming out of the Mississippi soon! Tight lines, and uh, even tighter tools 🛠 too! 👍🏼
Thanks for posting that bud can i have your permission to share to our outdoors channel hit me up on fb messenger
@@danvanvliet9201 sure
👍 your very good at engineering.
Nice sled! Looking to do something like this. Good video.
I love it! I need this for hauling firewood, but I need back surgery so bending low enough to get the wood out of it is too hard on my back. I've been looking for a way to raise my sled up.
Thanks for this video.
Very clever!!!
Clever, very nice.. cheers!
Great job dude!
I’ve had various variations of the ole smitty, none like yours tho, next build I will be trying some of your hacks.
Very cool. Nice
This is genius. I am going to make one
Hey great setup! I hope you have a bunch of videos on deck as I'm out of commission for a bit after spine surgery. No ice fishing for me this winter. These videos are my therapy until the stripers show up in the spring.
Thanks,
Thanks Morty I’m glad you enjoy the videos! I haven’t had much luck on the ice the past few times out but I’ve been going through footage from the last couple years to start on a bloopers video and a Whopper Plopper strikes compilation.
Has your spine healed up??
@@Steve-sv3ln yes sir thank you for asking,
This is absolutely sweet. I keep looking around for cheap ski's and can't find anything. That is a light and very efficient set up tear down style of Smitty sled. Probably not worth your time to start selling them but if you ever do, send me a message. Good stuff.
I had to check several thrift stores to find the skis but the one I found these at had about six pairs. It makes a huge difference having them once there’s snow on the ground!
Legend!
Nice brother
I bet not it would be so slick to have one!!! Just bought a pelican catch 100 so I'm gonna have to stick to the good ole fashioned anchor for a little while.lol
That's sweet 👍🏻 👍🏻
Man that's sweet
Still one of the better builds ....my opinion
I love the name "sledski"
love this design, I am thinking about making this same one, the only thing that I have a tough time with is the blocks mounted to the underside of the sled. Kind of means you always have to use the sledski...
I did recently replace those four corner tabs under the sled with two strips of 1/2” HDPE that run the entire length of the sled. I figured it would give it a little more support in the middle and if one of those aluminum welds ever broke it should be easier to pull back with the skis off.
very cool and glad to see a video from you looking foward to you crushing some of thos toad smallies once the water thaws fro you!
Spring can’t get here soon enough! I’m about ready to swap the auger for the paddle.
@@ndyakangler right well down here in virginia I have been on the struggle bus trying to catch fish as well so can't wait for a little warmer weather myself but at least we still have open water to fish after the ice melts off in the early morning.
I’ve made 3 Smitty sledges and never looked back. If you ever get on bare ice watch out it’s so easy to pull it might run you over lol. I love the snow cameo jet sledge.
Interesting idea, I just fastened teflon runners to the bottom of my sleigh
I put some skis on my kids trike. Set up so we could both ride it but it ended up being more fun for me. Now I got the sled bug, trying to figure out easy/cheap suspension so I don't bounce around 6" off the seat
Wow so simple to instal
I like it 👍🏽
Real nice..sure would like to see a picture or video showing “notches” on new runners and how it’s attached to bottom of sled very slick set up!
I might do a quick update video this winter. I went with 1/2” HDPE strips on the bottom, 2” tall by the length of the flat portion of the bottom of the sled. I basically just used a hole saw the size of the aluminum bars and drilled them so the edge of the circle was at about the bottom edge of the runners, then cut straight down with the outside edges of the circle cutouts so they’re like an upside down U. I ran a few machine screws into the runners from the top side of the sled and gave them some big washers.
@@ndyakangler sounds good! Thx for replying so quick.. tryin to track down some plastic now.. and the perfect aluminum tubing..good luck on the ice this year..be safe cheers
Hello! Hope the bite is on! So..thx again for vid.. I duplicated this Exact set up .. works flawlessly..on a little larger otter..gonna put full length of plastic on bottom..tabs hang on everything lol.. have you ever pulled yours behind machine of any sort....how tough ? Thx again.. tightlines cheers
Wish I knew how to send ya pic..lots of compliments..
So simply and minimal weight!
Now... got any good ideas on adding wheels to drag non snow covered surface? Even non snow covered ice.
Maybe something that can stay on the skis?
Just finally got around to watching this vid. It's a great one! I have two questions, did you angle the back ski cleats at 60° as you did the fronts and did you angle them forward as they appear to be in the video? My other question is approximately how many inches hangover did you give yourself from the rear and front of your skis? Do you find it's better to have more fronts ski showing then rear ski for balance? I guess that was three questions😀
👏🏻👏🏻👏🏻
Harness makes a big difference with sleds, mine fits over my neck and shoulders, I pull heavy loads with ease.
I’ve thought about adding some type of harness but I can usually pull that sled with my pinky finger, although if I have to pull it any distance I’ll put the rope around my waist.
Very nice. I want to make this for next year using steel tubing tho.. so i can weld it myself, just curious what size of jet sled that is? Thanks
Great design and setup for sure the only thing I wouldn’t do is put the HDPE things on the bottom of the sled there’s times when we have to pull our sleds across gravel parking lots or asphalt to get to the ice and if you’ve ever pulled a sled loaded on top of a Smitty without snow or ice is isn’t fun !
I’ve actually done a couple modifications since I filmed this video, for one I replaced the four “tabs” under the sled with two HDPE strips that run the length of the sled. Other than the notches for the bars it’s like having a sled with HDPE runner strips so if I need to pull it without the skis it’s no problem. I also moved the sled over on the bars from the middle to one side so the shack can sit next to the sled rather than in it.
Great video
How long are the skis?
get a fat tire bike and hook this thing up to it. youll cover an entire lake in no time man. Ive already got the bike so I will be making a carbon copy of your setup for next winter, cant wait, it will pull like a dream!
Nice outfit.
. Nice one . Do you make the wax foams and the bars for sell ?
Just found your video - Great review and nice enginuity. I'm toying with styles, etc. I like the HDPE suggestion. Can't go wrong with Alum pipes for something like that either. How high did you end up going with your pipe from the footing on the ski to the bar that holds your plastic tub/sled. ?
The leg pipes were about 8” long. I probably made them a little longer than they needed to be, I’ve never seen the skis sink more than a few inches into the snow.
that is a hell of a lot lighter and nicer than the wood ones. I was going to build mine with 2x8s but I am having second thoughts after seeing this. if I can find that plastic somewhere? I am going this route. Thanks for the idea.
Around here we have Mac's hardware where they have bins of misc scrap plastic pieces and sell it by the pound. They usually have a decent selection of HDPE. I've also found it locally by calling a place that makes plastic display cases. My last resort is ordering online from TAP plastics, I can have them cut it to whatever dimensions I want but I also have to pay shipping. Another route you could go, most plastic cutting boards are HDPE. You might only be able to find them as thick as 1/2" but you could do double layers of that for the ski blocks. Just have the screws from under the skis thread into only that top layer of HDPE to hold everything together. I've hole sawed through double layers like that as well. HDPE is slippery so I use double sided carpet tape to pretty much turn two sheets of 1/2" into a sheet of 1" if the piece I'm making will be screwed together in the end anyway, then clamp it down good on the drill press before hole sawing it.
Any plans on going with a new kayak in 2019?
Nice clean and simple design…great job! I’m just in the midst of getting mine ready to be built and have a question. Would you find the sled tippy if the skis were only the outer width of the sled compared to being wider as you constructed?
My sled is only about 24' wide so having the skis that width apart might make it a bit unstable at the height I built it to. The way it was shown in the video I'd stack everything into the sled with the shack bag on top along one side next to the propane tank and I'd often have it roll off when I'd get one ski up on a snow drift. What I ended up doing was shifting the sled over around 5" or so to one side of the bars and that left plenty of room to lay the shack on the bars next to the sled, and added a bungee cord around the shack from the sled. That lowered the center of gravity and opened up a lot more room in the sled, less playing tetris trying to fit everything into it. It works great!
curious to know when watching fish for small mouth what line do you use on your spinning reels? Is it mono and if so what kind? thanks!
I use 10-12lb Trilene Sensation mono on most of my open water spinning reels.
That's what I want to do ontop of putting together all of my other stuff put my sled together
It saves time in the end if I’m pulling the sled any kind of distance. It takes maybe 60 seconds to put it together when I’m not trying to film the process, then I can easily pull it along with my pinky finger. Meanwhile my fishing buddies are struggling to pull their regular sleds through the snow, having to stop every 50 yards to give their legs a break and catch their breath. If I start walking back from the fishing spot at the same time as them I usually have my gear loaded into my truck by the time they’re within 100yds of the launch and I’ll go back and help carry some of their gear up the final hill.
@@ndyakangler my buddy has a wooden box with a seat he pulls his tent over the whole thing that has skies on it I just bought a cheap lite snowmobile and a little trailer I'm all done driven on shady spots and pulling 100pnds of gear threw snow..I try to make everything when it comes to icefishing less work and more fishing time
Great sled and video. Could you use, 1 1/4" pvc instead of steel pipe. Could you advise what the height of the legs are. Would appreciate the insight.Thanks.
Are you using the Shappell Ice Fishing Jet Sled JS1-WC (54" x 25" x 12") or the JXS-WC (66" x 31" x 12")?
Was there a reason for boring the holes in the blocks on the ski's at an angle versus just having them straight up and down?
Doing them at 90 degrees might have worked fine, the HDPE doesn’t seem to get too brittle in extreme cold. My main concern with doing it that way was when pulling the sled up and down any hills or boat ramps the prying force on the HDPE blocks attached to the skis might cause them to fail. A square/rectangle is a weak structural form which can easily collapse upon itself. I chose to go with more of an isosceles trapezoid to redistribute some of the force from the aluminum poles and make it structurally stronger.
love this sled! are the HDPE pieces that are screwed to the skis 1"? You do say 1" in the video but they look a little thicker? I'm going to try your design as well, but I'm wondering if I should get the 1" or 1.5" thick plastic. Beautiful design and thanks for posting.
I went with 1” but it wouldn’t hurt to use thicker plastic. The 1” seems to work fine though, I’ve only had a leg pop out of a plastic block once when pulling it over some rough terrain.
@@ndyakangler thanks for the reply. very nice sled