Miss your videos very informative. Maybe you can tell us homeowners the difference between 79 cent single pole switches and the $4.00 ones and what do you use?
Wildman drilling inot the siding with a spade bit. I use a hole saw backwards to get through the plastic and the house because thats all ipl use. Ive had the siding crack especially if it's cold out.
Man you actually made a job out of this, you could’ve just taken a square shovel and pitch the soil a bit then put a short leader hose so when you want to attach you’re regular hose it’s a snap😅. A remedy for the ants use old motor oil around the perimeter of the house no more ants or termites just don’t let the environmental freaks know about it 😂 keep the vids coming 👍
you know, you can hold a fitting against the outside of pipe and depth mark it before you shove it in place, then you don't have to put them in and take them out multiple times. measure, cut, mark depth, insert, press. 😉 unless you're trying to pad out an hourly rate. 😏
I meant just use one of the same size fittings as a marking gauge and holding it lined up on the outside since they all have a raised area where the pipe stops against. or you could always make your own gauges with various size pvc (and caps). if you want a slide over and hard stop marking gauge. even little blocks of wood cut to the same length and held flush to the end would work.(more things to drag around and fiddle with, vs. just holding a fitting there)
I don't rum new copper just repairs and only use the manual press 6 to 12 fittings a month that's why it's so hard. Maybe I'll keep an eye out for a used one that's dirt cheap.
Mom calls the loving son, he returns to the scene of a past attempt then makes all better for love not money, thxs for sharing...
Lol 😆 it was like u knew Tom lol u just got done talking about me going over there. Weirdddd
@@thehandymanexperience226 your "Brother" is next (again)
lmao @ the cat suddenly popping up in the crawlspace
Everytime I go down there, I'm like I'm going in the hole lol and the kitties go down there everytime lol 😆
Miss your videos very informative. Maybe you can tell us homeowners the difference between 79 cent single pole switches and the $4.00 ones and what do you use?
Yea my bad I have been slammed recently! That's definitely a good idea!
Very nice install at mom’s house! Handyman Dave !
Thanks Dave!!!
Wildman drilling inot the siding with a spade bit. I use a hole saw backwards to get through the plastic and the house because thats all ipl use. Ive had the siding crack especially if it's cold out.
Yea ur right, I've always used a spade but it's definitely not easy always. But yea plastic gets britle
good work, I would rarely use that spigot just because it's so low ,if at least it wasn't frost-free and angled to the side instead of down
Thanks man!! Yea definitely a crappy scenario
Very nice job you did.
Thanks!!!
@@thehandymanexperience226 your welcome.
I love your videos when you work on your parents house!
Thanks!!! Yea it's never ending over there lol
Man you actually made a job out of this, you could’ve just taken a square shovel and pitch the soil a bit then put a short leader hose so when you want to attach you’re regular hose it’s a snap😅. A remedy for the ants use old motor oil around the perimeter of the house no more ants or termites just don’t let the environmental freaks know about it 😂 keep the vids coming 👍
Lol 😆 I'm always complicating stuff, u know this.
Great Job
Thanks!!!
You got to take care of the parents ; )
Yea 😆 I'm always fixing something
you know, you can hold a fitting against the outside of pipe and depth mark it before you shove it in place, then you don't have to put them in and take them out multiple times.
measure, cut, mark depth, insert, press. 😉 unless you're trying to pad out an hourly rate. 😏
I know they have depth gauge for pex, didn't know they have them pro press. I'll have to look that up thanks
I meant just use one of the same size fittings as a marking gauge and holding it lined up on the outside since they all have a raised area where the pipe stops against. or you could always make your own gauges with various size pvc (and caps). if you want a slide over and hard stop marking gauge.
even little blocks of wood cut to the same length and held flush to the end would work.(more things to drag around and fiddle with, vs. just holding a fitting there)
@@throttlebottle5906 oooo
Thanks!
Thank you!!!!
look s better that way but pex can take a freeze better except for the connecter' s
Yea pex is awesome for freezing!!
You really make to want to get a battery pro press since I have a manual one. Then my wallet cries 😢.
Crimpin ain’t easy 😭😭😭
Yea they definitely aren't cheap!
I don't rum new copper just repairs and only use the manual press 6 to 12 fittings a month that's why it's so hard. Maybe I'll keep an eye out for a used one that's dirt cheap.
you seem to be good at goofing up! 🤣🤣 yeah, join the crowd, it happens to everyone, regardless of age/knowledge. lol 🥸😎
Yea it's always a learning experience
Hey ,what's a hvac guy doing watching plumbing,have seen you around a long time ,throttlebottle5906