How To Remove The REAR WHEEL On A Scooter!

Поділитися
Вставка
  • Опубліковано 8 вер 2015
  • Learn how to easily remove the rear wheel on a GY6 50cc/125cc/150cc scooter. Once the rear wheel of the scooter has been removed, you can replace the tire, work on bearings, or inspect the rear brakes. Enjoy!
    Thanks For Watching!
    Support the creation of more electronicsNmore videos:
    www.paypal.me/electronicsNmoreYT
    **If you enjoy watching my videos, please show your support by SUBSCRIBING, POSTING LINKS to my videos on other websites & blogs, rating a "THUMBS UP", and watching my video playlists. Doing so helps to ensure that many more videos will be released in the future. (Views are essential to ensure this channel remains in an active state)**
  • Авто та транспорт

КОМЕНТАРІ • 168

  • @isaacbasgall6135
    @isaacbasgall6135 3 роки тому +7

    Hands down great video the only one I could find to get an idea of what actually needed to happen. Thank you

  • @DRAGNET-pn5vf
    @DRAGNET-pn5vf 10 місяців тому +3

    WELL EXPLAINED BACK TIRE REMOVAL WITH A BOARD TRICK FOR A SHORTCUT, WELL DONE. THANKS FOR THE VIDEO!🇺🇲🎉👍🏻

    • @chadsimmons6347
      @chadsimmons6347 9 місяців тому

      Yes Grandpa's Old-Man, Old School, Antique tool collection, finally did get some use! Buy an impact GRANDPA!!

  • @Mordavia284
    @Mordavia284 3 роки тому +5

    THANK YOU so much for the great video, no b.s., very straightforward and helpful, and helped me out of a struggle when I couldn't find anything else on the web about my problem.. (unrelated problem, but you showed clearly the workings of the components and the use of the puller...) . what humility lol and a challenge .... thanks again

    • @electronicsNmore
      @electronicsNmore  3 роки тому +1

      Glad it helped! You're welcome. Be sure to look over my extensive video playlists below for many other videos of interest to you, and most importantly take one minute to share links to my videos with others on social networking sites. Thank you
      ua-cam.com/users/electronicsnmoreplaylists

  • @Pv_sMediatrics
    @Pv_sMediatrics 2 роки тому +3

    Awesome bro.. thanks for this. I was able to do all that you showed except for that tool that slides the wheel off. Dint have that. But it came off pretty easy. I changed my tire, which was the hardest part of the process. After completion, I went to the tire shop for air. Only for him to take the tire off, wrk on it put it back on with ease and filled it up. I was destroyed!.. but my mission was taking the wheel off which I was able to. Thanks a lot man!! Good stuff!

  • @rvradiofanatic7030
    @rvradiofanatic7030 6 років тому +5

    Great job nice and patience of explaining

    • @electronicsNmore
      @electronicsNmore  6 років тому +2

      RV radiofanatic Glad you enjoyed the video! Be sure to check out my video playlists and share. Thank you

  • @josecasanova7673
    @josecasanova7673 2 роки тому +3

    Thanks brother.. It's gonna save my 50.00 buck's in my pocket..🙏

    • @electronicsNmore
      @electronicsNmore  2 роки тому +1

      Glad I could help! Be sure to watch and share my GY6 scooter video playlist below and share. Thanks!
      ua-cam.com/play/PLQ6IOhUBblU1bkRJ9MagPsKn_Mekq4ws8.html

  • @tectalabyss
    @tectalabyss 9 років тому +1

    awesome how to video. Soon has I get caught up,I hope to support you through Patreon. Thank you for all the great videos.
    All the best.
    Bobby

    • @electronicsNmore
      @electronicsNmore  9 років тому +2

      +Bobby Tectalabyss You do enough already. I don't expect you to support via Patreon. That link is for viewers who do not post links, and share my channel, but would like to support my channel with a donation to show their appreciation for my videos.
      Thanks For Watching

  • @michaelmiller6394
    @michaelmiller6394 6 років тому +9

    You can take the wheel off without removing the exhaust manifold, just let the air out the tire, you can compress the tire pass the manifold without all the extra work.

  • @steve531109
    @steve531109 8 років тому +1

    Nice clear vid . Thanks .

    • @electronicsNmore
      @electronicsNmore  8 років тому +1

      +Steve Rhodes
      Thank You. Be sure to check out my GY6 playlist, rate thumbs up, and share my channel with others.

  • @sambrian5405
    @sambrian5405 2 роки тому +1

    Thank you very much I was gonna do something very dumb if I didnt see this. Great explanation.

    • @electronicsNmore
      @electronicsNmore  2 роки тому +1

      Glad I could help! Be sure to watch and share my GY6 scooter video playlist below and share. Thank you
      ua-cam.com/play/PLQ6IOhUBblU1bkRJ9MagPsKn_Mekq4ws8.html

  • @edwardjames6070
    @edwardjames6070 Рік тому

    mine is a tao tao 150 and I was worried about that rear nut. thanks to you it should be easy.

  • @damonkeyboy5541
    @damonkeyboy5541 2 роки тому +1

    It helped others but not all as my scooter isn't built this way and yet I was still recommended for this video

  • @geojor
    @geojor 8 років тому +1

    thank you...

  • @tellmesomething2go
    @tellmesomething2go 5 років тому +1

    as always. excellent!

  • @joeltamaster
    @joeltamaster 4 роки тому +4

    Thx man only youtube video that helps 👊🏻❤️

    • @electronicsNmore
      @electronicsNmore  4 роки тому +1

      You're welcome! You can support my channel by watching my "GY6 Scooter" video playlist and sharing. Thank you
      ua-cam.com/video/5vl1mrTVCQ0/v-deo.html

  • @theSirAndy
    @theSirAndy 6 років тому +1

    Yeah somebody slush both my tires on my scooter looks like a lot of work change a rear tire front tires easy rear tire thank you for the video I'll pay somebody to do my rear tire thanks keep up the good video

    • @electronicsNmore
      @electronicsNmore  6 років тому +2

      Sir William Hinely You're welcome! Be sure to rate thumbs up, check out my extensive video playlists, and share my channel with friends. Thanks

    • @theSirAndy
      @theSirAndy 6 років тому

      I I got to ask you where to get the pulley

  • @hinken24
    @hinken24 2 роки тому +2

    if wheel keeps spinning while removing nut you just press rear breaks. use rope tied around handle if you are alone.

  • @kylesummers8011
    @kylesummers8011 2 роки тому +2

    Useful thanks

  • @ElectricExperimentsRobert33
    @ElectricExperimentsRobert33 7 років тому

    The muffler gets supplied from the house or you did you put it?

  • @jeffb6161
    @jeffb6161 8 років тому +2

    nice, thanks

  • @fctryoffetsh39
    @fctryoffetsh39 7 років тому +2

    thanks

    • @electronicsNmore
      @electronicsNmore  7 років тому +1

      You're welcome! Be sure to rate thumbs up, share with others, and check out my other videos. Thanks

  • @aphalunj
    @aphalunj Місяць тому

    Thanks. Did not help much but at least you tried. :)

  • @chriss4365
    @chriss4365 7 років тому +1

    Do you have any videos showing how to get the bearings out that are in that plate that slides over the rear wheel?

    • @electronicsNmore
      @electronicsNmore  7 років тому +1

      Hello. No. I don't have a video for that, but you should be able to use a large screwdriver and hammer to tap them out, or a socket to remove and install them.

  • @felicetanka
    @felicetanka 3 роки тому +1

    I believe grease on all threads is advised.

  • @RobertdddJones
    @RobertdddJones 2 роки тому

    I need some advice because my yy150-12 has the brake out the wheel. I’m not sure what wrong but it’s not my belt or motor. My scooter will move either direction about 3 feet then lock up. I honestly don’t know what I am doing just need advice or pointed in the right direction

  • @lmao-vt3yc
    @lmao-vt3yc Рік тому

    what do we use to pull the break lining thing off if we dont have a puller or whatever it’s called

  • @getstupid2264
    @getstupid2264 Рік тому

    I was hoping maybe you can help me I did what you showed in the video and with the puller on the swing arm, it still won't come off from the rim. It's a ice bear 150cc clone of the Yamaha Zuma.

  • @khaliddobashi2446
    @khaliddobashi2446 3 роки тому +1

    Really helpful 👌👌👌👌🤣🤣😄✅✅✅✅

    • @electronicsNmore
      @electronicsNmore  3 роки тому +1

      Great to hear! Be sure to watch my GY6 scooter video playlist below and share. Thanks
      ua-cam.com/video/5vl1mrTVCQ0/v-deo.html

  • @fctryoffetsh39
    @fctryoffetsh39 7 років тому +1

    ok thanks

  • @NinjaFighterUltimate
    @NinjaFighterUltimate 7 років тому

    thanks. i have a question my kymco super super 8 rear mags/wheels is very hot after using it. is it normal?

  • @rudyramos3678
    @rudyramos3678 4 роки тому

    Quick question do you have to add the exhaust cover back on my shock is not connected to that just my exhaust pipe and I'm trying to change it out

  • @eg336
    @eg336 6 років тому +1

    to the wheel could stop moving have someone hold the breaks or have like a belt holding the breaks

  • @bent3
    @bent3 3 роки тому

    I have the same set of rear wheels w/drum brakes on my ruckus and like to know what wheel size and bolt pattern I need to get?

    • @electronicsNmore
      @electronicsNmore  3 роки тому

      You'll need to match yours up or look online for Ruckus parts. I no longer have the scooter. Thanks for watching

  • @willycox6402
    @willycox6402 4 роки тому

    General question before I pull off my tire I rode my 150 home went to pull in and it locked up my rear tire. 2 days later I was just moving it back n forth and it unlocked. Any suggestions?? Maybe rear wheel bearing? Or grease it?

    • @electronicsNmore
      @electronicsNmore  4 роки тому +1

      It sounds like the gears inside the case that connect the clutch assembly to the rear wheel axle, are damaged.

  • @kendogmac
    @kendogmac 2 роки тому

    What size is the nut that holds the swing arm to the rear axle ? I lost mine down the road hahaha

  • @feliperodea8316
    @feliperodea8316 2 роки тому +1

    what size is the nut on the axle?

  • @frankb1208
    @frankb1208 2 місяці тому

    When you take the wheel nut off is there a spacer behind the wheel nut?

  • @spydernam
    @spydernam Рік тому

    If I wanted to change to stainless where do I get the bolt kit for it?

  • @NightFlutter
    @NightFlutter 7 років тому +1

    whats the number of the offset wrench you used? 4:00

    • @electronicsNmore
      @electronicsNmore  7 років тому

      Hello. I have no idea. It's been a long time, and I sold the scooter 1 year ago. Yours may be a different size.

  • @BOOGA97
    @BOOGA97 2 роки тому

    I need an new bracket, that black price that holds the muffler and houses the axle nut, I onow I'm super late to this, does anyone know where jcan find one?

  • @AndrewSosa
    @AndrewSosa 5 років тому

    My gy6 has a sprocket on it because it was from a quad. How do I set it up for a wheel to be mounted on it?

    • @electronicsNmore
      @electronicsNmore  5 років тому

      There are many scooter/GY6 forums online that can help you. Thanks for watching!

  • @miguelfernandes5336
    @miguelfernandes5336 6 місяців тому

    have play in the wheel, could it be the bushing or bearings

  • @derrickjohnson2463
    @derrickjohnson2463 Рік тому

    What tool are u use to take the tire off

  • @user-br8ug5kf6t
    @user-br8ug5kf6t 9 місяців тому

    How do you change the shaft that turns the rear wheel

  • @onelove8509
    @onelove8509 6 років тому

    do both bushings go between the rim and the swing arm?

    • @electronicsNmore
      @electronicsNmore  6 років тому

      One Love You needed to video each stage as you pulled it apart.

  • @fctryoffetsh39
    @fctryoffetsh39 7 років тому +3

    do some mopeds have one shock in the back mine does

    • @electronicsNmore
      @electronicsNmore  7 років тому

      I have no idea, every manufacturer is different.

    • @DavidLozano
      @DavidLozano 5 років тому

      Mostly 150cc have 2 shocks, but some manufacturers differ. Wolf brand have 2.

    • @tellmesomething2go
      @tellmesomething2go 5 років тому +2

      moped has pedals. scooter does not.

    • @tellmesomething2go
      @tellmesomething2go 5 років тому

      @@electronicsNmore my 2014 tao tao, has two. considered a motorbike. 2. 83 hp.

    • @carlossanchez8135
      @carlossanchez8135 4 роки тому

      Yes my does

  • @francismella1171
    @francismella1171 4 роки тому

    What's the special tool you used to take the bushing off before sliding the wheel off?

  • @ssddgaming9583
    @ssddgaming9583 Рік тому

    What size is that back bolt

  • @transmissionjimmy69
    @transmissionjimmy69 Рік тому

    What brand of tire is that & what size? I really like the tread pattern…

  • @orangestoneface
    @orangestoneface 5 років тому

    can you drive without the fork plate black supporting axle on right side, gess not , axle can bend.

  • @michaelrellinger3429
    @michaelrellinger3429 5 років тому

    i have a gy6 soccoter and i need the part that the rear shock goes on the right side any one knows ware i can find one

  • @darviawhitfield6745
    @darviawhitfield6745 Рік тому

    What if the bolt in the and the is stripped

  • @miguelfernandes5336
    @miguelfernandes5336 6 місяців тому

    Can you explain this my wheel is with gap

  • @claudio67362
    @claudio67362 5 років тому +1

    HI there,the wheel takes two spacers or bushings,the big one and a small one,i saw him remove the big one but i never saw the small,can any body tell me where the small goes?thanks

    • @electronicsNmore
      @electronicsNmore  5 років тому +1

      It's possible one remained in the metal plate I pulled off. Thanks for watching!

    • @claudio67362
      @claudio67362 5 років тому

      @@electronicsNmore thank you,but just to make sure,on the metal plate towards the wheel side or on the nut side?

    • @brendonmay289
      @brendonmay289 4 роки тому

      Where do these 2 damn spacers go

  • @maryroberts4602
    @maryroberts4602 6 років тому +1

    I got a 50cc zene scooter from a friend he no longer has the back rim and tire its a 120/70-12 with dics brake, can you help me out please been looking over a month"

  • @angeljimenez5406
    @angeljimenez5406 2 роки тому

    Hello. I was trying today to remove the swing arm. And it just would not come out. What is the name of the tool you used to remove it again?

  • @johndonaldsaspa4029
    @johndonaldsaspa4029 Рік тому

    What is the size of the nuts on the rear wheels sir? The bigger one

  • @ResponsiveWeb24
    @ResponsiveWeb24 6 років тому

    is this 150cc? i got 49cc and my bracket on the right side is different.

  • @jackammo9745
    @jackammo9745 7 років тому

    Can this be done without a gear puller? If not how many inch puller is needed?

    • @electronicsNmore
      @electronicsNmore  7 років тому

      Possibly because it's not on the shaft very tight, but you can buy a puller very cheap at Harbor Freight. Buy one like mine.

    • @jackammo9745
      @jackammo9745 7 років тому

      electronicsNmore I got a cheap-o puller from Amazon thanks for the video!

    • @HasanALi-lj7mx
      @HasanALi-lj7mx 6 років тому

      electronicsNmore mine is on very tight and I don't have a puller. please help.

    • @goulash75
      @goulash75 5 років тому

      Also would like to know how many inch puller is needed.

  • @strubbleler
    @strubbleler 8 років тому

    Hey, i cant get the bolt removed. Its stuck, i used all my might but i cant seem to get any movement in it. What to do?

    • @electronicsNmore
      @electronicsNmore  8 років тому

      +FunkyWhiteDude
      They can be a pain in the ass. You probably need someone sitting on the bike while you do it, or you will need an impact wrench.
      Thanks

    • @strubbleler
      @strubbleler 8 років тому

      i tried it together with my dad, but we coulndt get it done :(
      for you see, the rear brake is worn out so it doesnt work.
      our wrench has a curve now ;/

    • @electronicsNmore
      @electronicsNmore  8 років тому

      FunkyWhiteDude Did you try wedging the wheel so it does not turn? If so, you will need to borrow an impact wrench.

  • @ReklessMusik
    @ReklessMusik 2 роки тому

    My bushing spins with the wheel, so the right side metal that the muffler was attached to won’t come off. Help !!!

    • @electronicsNmore
      @electronicsNmore  2 роки тому

      Try and find a parts diagram online for your make and model. It will be much easier to see how it comes apart.

  • @roly2868
    @roly2868 9 місяців тому

    My wheels were damaged, my wheels are 14 and these are 13, do you think they fit my scooter, I can't find my size?

  • @saudanao5600
    @saudanao5600 5 років тому

    Is this yamaha earox 155?

  • @N3XTGEN-CONTRACTORS
    @N3XTGEN-CONTRACTORS 5 років тому

    Brill video my back wheel made a crunching noise and my wheel locked any ideas as it's only just happened

    • @electronicsNmore
      @electronicsNmore  5 років тому

      Either a brake problem or broken gear due to a lack of gear oil. Thanks for watching! Be sure to watch my GY6 video playlist, rate thumbs up, and most importantly SHARE.

    • @N3XTGEN-CONTRACTORS
      @N3XTGEN-CONTRACTORS 5 років тому

      @@electronicsNmore Thank you for the reply pal I had all the oils checked out and they said that was fine so I'm hoping the break pads have just shattered inside... just a quick question what's the size of the pulley you used

  • @newbight
    @newbight 8 років тому

    is that a bahamian inspection sticker on the panel

  • @andrejplenkovic3296
    @andrejplenkovic3296 5 років тому +1

    Hi, whats the name of tool you use on 5:52?
    Thanks

    • @durrh3784
      @durrh3784 3 роки тому

      Did you figure out the tool

    • @andrejplenkovic3296
      @andrejplenkovic3296 3 роки тому

      @@durrh3784 yes thanks, year ago

    • @durrh3784
      @durrh3784 3 роки тому

      @@andrejplenkovic3296 wat was it called

    • @andrejplenkovic3296
      @andrejplenkovic3296 3 роки тому

      @@durrh3784 izvlakač or extractor or pull out tool

    • @andrejplenkovic3296
      @andrejplenkovic3296 3 роки тому

      @@durrh3784 i bought it for 50 euros, wasnt cheap, for only one usage!

  • @stephensummerlin4951
    @stephensummerlin4951 Рік тому

    I need to see where the spacers

  • @kevinthorn9672
    @kevinthorn9672 2 роки тому

    What size box wrench?

    • @electronicsNmore
      @electronicsNmore  2 роки тому

      Metric 16*1.5

    • @kevinthorn9672
      @kevinthorn9672 2 роки тому

      @@electronicsNmore for a 50cc rx 50 wolf if its strip how also can i remove it..

  • @stephensummerlin4951
    @stephensummerlin4951 Рік тому

    Go on the rear axle.

  • @user-pp5nv4gp2u
    @user-pp5nv4gp2u 8 місяців тому

    How to change the rear bearings on a 150 scooter

  • @joseph51588
    @joseph51588 9 місяців тому

    Where do I find a rear tire

    • @electronicsNmore
      @electronicsNmore  9 місяців тому

      Many places online. Search for your tire size

  • @alielsheikh8990
    @alielsheikh8990 5 років тому

    What's the size of the rench

    • @electronicsNmore
      @electronicsNmore  5 років тому

      Been a while and the bike was sold. I think around 7/8" / 32mm. Thanks for watching!

    • @alielsheikh8990
      @alielsheikh8990 5 років тому

      electronicsNmore thanks

  • @betsalelinbar1924
    @betsalelinbar1924 2 роки тому

    What kind of mother f... engineer could possibly design this bracket to be removed with a jaw puller lol, on mine you don't need it.
    btw, i noticed rear wheel has this bearing sitting inside the bracket, on mine you have 2 bushes that press from each direction and then some kind of seals and then the bearing itself. i hesitating a bit to try and remove those seals and reach the bearing alone so i can spray it and clean it before i regrease it, but i don't wanna rip those rubber seals. what do you advise?

  • @HasanALi-lj7mx
    @HasanALi-lj7mx 6 років тому

    Why was my wheel so hard to remove?

    • @electronicsNmore
      @electronicsNmore  6 років тому

      Why was the not hard to remove, or the rear wheel? Once the nut is removed, the wheel should pull forward easily.

  • @bemil4428
    @bemil4428 3 роки тому

    when i try to remove mine it’s just stuck to the scooter

    • @electronicsNmore
      @electronicsNmore  3 роки тому +1

      Once the nut has been removed, it should slide off, unless there's a retaining ring also. Try hitting the opposite side of the rim using a rubber mallet as you rotate the wheel.

  • @durrh3784
    @durrh3784 3 роки тому +3

    What kind of tool is tht

    • @electronicsNmore
      @electronicsNmore  3 роки тому +1

      Double offset box wrench and 2 jaw gear puller.

    • @MedPaz
      @MedPaz Рік тому

      What size ?

  • @demetriuswilliams4721
    @demetriuswilliams4721 18 днів тому

    C

  • @lovleywilson3421
    @lovleywilson3421 Рік тому

    😍🥰😘

  • @illbefrank123
    @illbefrank123 Рік тому

    same kinda guy that owns no power tools is the same guy that rides a scooter as a daily driver.

  • @JSchrumm
    @JSchrumm 9 років тому

    It looks delaminated to me.

  • @londonbsing
    @londonbsing 2 роки тому

    i can take everything off but i cant remember how to put it back together. my brain needs help

  • @wolfjay1343
    @wolfjay1343 7 місяців тому

    Oh My Godd No Freaking Video Tells You What Size The Rear Wheel Nut Is This Is Ridiculous!!!!!!!

    • @electronicsNmore
      @electronicsNmore  7 місяців тому

      Why? Because it's going to vary depending on the manufacturer

  • @luzsol1609
    @luzsol1609 5 років тому

    i broke a litle peace of my weel doing this . its aluminium weel : (

    • @electronicsNmore
      @electronicsNmore  5 років тому

      No idea how you managed to do that.

    • @luzsol1609
      @luzsol1609 5 років тому

      +electronicsNmore i am gifted kkk .