Chemical dipping a 1955 Chevy bel air to get it down to bare metal!
Вставка
- Опубліковано 28 вер 2024
- In todays video I am dipping a 1955 Chevy Bel Air. We are getting this car down to bare metal prior to our customer completely restoring it.
Step 1: alkaline paint removal dip
Step 2: Rust removing acid dip.
Step 3: apply a temporary rust inhibitor
The dipping was done at 3schemicalsllc.com contact them for any quotes or scheduling
#chevy #chevrolet #belair #Motoring #Automotive #CarGuy #MotorSport#ClassicCar #TopGear #RaceCar
#oddlysatisfying #clean #cars #car #classic #classiccars #chemicaldipping #acid #alkaline #carsofinstagram #restoration #powerwashing #classic #paint #rust
Amazing to see the bare-metal body that last saw the light of day in the body shop where it was fabricated nearly 69 years ago. Theoretically, it could have been built in the fall of '54. Well done, men.
Excellent theory and most probability
You're right in the money....
Beautiful quote....Last time that metal has seen the LIGHT OF DAY"
69 years ago....
My Uncle and brother worked running presses in sheet metal at GM from the 40’s on. Brother in 60s-70s. They were partially deaf from the noise. It was loud even with earplugs.
@@techguy9023 "The Big Line Moves 1MPH so loud it really hurts"..........
partial lyric from the Bob Seger song Making Thunderbird's
Although we're as happy as you are to see the "lucky ones" that are in great shape, I think we would like to see the worst cases as well.
Thanks for doing what you do!
Who was that unfortunate person who was in the back seat?.
How do you keep it from rusting until you’re ready to paint?
Never seen one in such great shape. Was not expecting what I just seen.
😳
Awesome prep work! Do you have anymore videos of the car after paint? Thanks, John
So what is the cost difference between the dipping process and sand blasting? And which one is more beneficial on getting a good work surface?
I believe the acid dip takes minute layers of metal off as well as paint ! It lightens the metal, back in the day they dipped dragsters to lighten and go faster!
In the '80's, I was co-owner of a sandblasting biz. It took 5-6 hours to blast a body, correctly. You have to keep the pressure at a minimum & not directly blast at 90⁰ to prevent panel warpage.
This means going slowly. Later, newer types of blasting media helped prevent warpage, though I was out of the biz by then.
We always tried to collect small blasting jobs, & save them to do as the same time as bodies or frames. By piling the smalls on the frames/bodies, the overspray did a lot of the work, reducing material & time.
We charged $150/ hr in the early '80's for blasting. Gas/diesel was between $1-$2 a gallon & media was ~$3.00 / 50#'s.
Hope that helps. If you have a body blasted, shop on experience & attention to detail. NOT on price.
Sand blasting leaves the potential for panel warpage and wont be able to get to every little area. With acid dipping there's the potential for thinning metal and some believe the acid is never truly gone. both have their pros and cons.
@@isaakwelch3451 warpage from sandblasting is not inherently caused by sandblasting, but by inexperienced or inept blasters.
I have personally, and have had employees blast dozens of bodies, many dozens of body parts & other items of various metals as thin, or thinner than auto body parts & never caused warpage.
I will agree there are some places on a body where blasting cannot reach, but I found it to be an exception rather than a rule.
The few areas we found were mitigated through spot usage of rust desolving chems.
Liquid RustMort was our fav, as it leaves an anti-rust film/covering behind.
We used to put RustMort in a big SS container, dump a pile of rusty fasteners we would get free from our buddies at the wrecking yard, then run 12v DC thru them for 24-36 hours, (de-greased them first).
They came out like new, but were a light grey color. The damn things wouldn't rust, if you tried, unless you cut or ground the surface.
@@georgedennison3338 I'm merely pointing out potential downsides. Not every shop is gonna do a great job sandblasting and some will mess up your panels. Metal dipping isn't a perfect process either, it's just my personal preference because I think it does a better job and I'm more willing to deal with its downsides. Many will disagree and that's fine
I love the fact that you don’t mess around with employees if they don’t work and they go unfortunately they got caught on camera still dispose of the bones somewhere else lol that’s so funny
Hahahahhahahah
@@minute_of_dangle здравствуйте что это за жидкость и где можно купить сколько стоит спасибо 👍
Was that Jimmy Hoffa inside?
New subscriber here. I love seeing these classics begin their trip back from the dead. Fascinating. 👍
How about hot dip galvanizing just enough to treat rockers, inner rockers, and floor pan?
That is so cool, I suppose biggest fear would be when you go to lift body out and half of its gone! I knew a guy who sent his lettering badges to get re chromed, they dipped them in acid to clean them but when they lifted them out there was letters missing they drained tank but yeah nothing acid ate them away???
I killed a friend's aluminum intake manifold dipping it in carb cleaner. I had done the same thing many, many times before w/ no damage.
When I pulled his rare, OEM aluminum Z28 manifold out, imagine my embarrassment & surprise when it was Swiss-cheesed.
The only thing we could figure out was a combination of fuel caused 'coking', (the black crap from rich combustion of gasoline), had damaged the aluminum. It was only in the areas where the manifold was coked badly that the aluminum dissolved.
Boy, was that an expensive favor for a friend; not only did I have to buy him a new manifold, but it also ruined my dip tank solution.
@@georgedennison3338 oh crap, I have seen people use oven cleaner on intake manifold, they spray it on let it sit then get the pressure washer, it makes a mess but end result is very good, never tried it myself
Not a Chevy guy per say, but excellent example of a good candidate for this project. Very interesting.
The joker 😂 80s batman scene
You killed the little man on the hood... lol..
Bet that is so satisfying as a job to do before and after
I love the idea ❤
Oh no! That Joker doll got reduced to a skeleton... and grew into a full sized man!
Joker: Why so skeletal?
Thanks for the smile😀
This video is satisfying 👌
I wished you guys were on the west coast! With five '55 Chevys, I could use a good company like yours! The stripper nearby that I had used before has gone out of business.
Отлично! У вас много работы!
Love it!
Awesome 👍
Body in damn good shape
Doesn't the bare metal oxidize after spraying it down with water?
What's cost to have this done
considering all the bondo that came off..some body gonna have a time straighten that body for paint
I just gotta ask. Was that Jimmy Hoffa in the back seat?
Love the skeleton in the back seat. Lol
How will primer ever get in golds or like roof pillar or quartepanel? Just wondering
How much do you charge
Is the temp rust inhibitor used on every car? Is that what looks like galvanized metal? Is there another coating that's more durable?
And thats how he got the name, Bumble Bee
love it
I am confused. I didn't think the old cars like this had fuel doors. Thought they all filled from behind the license plate.
OMG dad said he was going to the store for a pack of Luckys! 3:25 . He used to sleep it off in the back seat rather than face a frying pan while on a bender. So that's where he's been all this time.
My cousin and I just looked at one of theses cars this morning unfortunately it was too far past, it was complete but if we had it dipped it probably would liquify
Отличная джакузи
Why do so many people restore the bel air? I’d much rather have a 150 with the 6cyl and a 3spd on the column.
Where are you located? I've got a 1937 pickup that needs dipped
hi i would like to ask about the name of chemical that you use it
Love the work you do & you got 1 new subscriber to your channel! Do you have a website or link I can go to for more info on your company?
Thank you! 3schemicalsllc.com
What are the wires on the roof ?
What’s the significance of the 2 action figures ?
What the cost of something like this? Have a car that needs this.
what is the name of acid?
Will that vat handle a 1970's C65 chassis Cab ?
What does it cost to have that done?
Oakite 77? Or a similar soak cleaner.
Where are y'all located at
Сеанс автомобильной некрофилии.
I think you forgot to take joker out cause he’s under there now
Los artesanos que hicieron esos vehículos ya no están con nosotros
They won't be anymore!
Just curious but how much does this cost and does Alabama have one?
If memory serves me right in Jasper Alabama Hensley's custom auto restoration and custom Auto body shop does something similar to this
@@michaelmyers3892 thanks .... I wonder if that was the same Hensley that used to be in bessemer. Anyway thank's again
@@billyhogan1863 I know this gentleman is run this company over there for a long time in Jasper I had a 73 Ford Torino GT500 fastback I had some custom work done by them back in '09 and it did awesome work
@@michaelmyers3892 thanks again, I know right were jasper is, just 40 minutes from me. Have a great 2023
What do you charge for a back hair removal dip?
😂 I’d suggest buying a roll of duct tape and having someone do the application and removal for you. Did you see 40 year old virgin? Hot wax was used on him. Step up your game. 🤣
You would think they would skim the tree branches & trash off the top but they don’t & that’s f_cking gross brah 😐
@sleeperdude88
Hi, thank you for those videos, it's a pleasure to watch every one of them, and discover the reality behind the paint.
It would be nice though to have just a bit more information:
- How many dips per step, and how long each dip?
- Is there a jet wash after each dip?
- What kind of solution and concentration are you using for each step?
Thank you and keep up the good work!
and COST to custumer,,,,,,,
How much does it cost for the average acid dip to bare metal?
I guess the joker didn't survive this chemical vat...
I grew up in that car, Dad had a green one with a cream roof. Mom wanted a 2 tone look. Pops had it painted by a local body shop.
Joker:I can't wait to go swimming!
Joker:wait a minute...
Joker:THIS IS NOT WATER! SHIT!
*Joker:* NOT THIS SHIT AGAIN!!
I like when the bondo patches fall off
Roger Penske dipped the 1969 Camaro that Mark Donahue campaigned in Trans-Am. Penske was a master at finding loopholes in the rules and kept the curious away from touching the car and denting the lightweight & fragile body.
Inner rockers and other boxed sections need to be rustproofed after stripping. What was the plan for that?
Would be nice if there were one more tank that did all the body work, blocking and painting to lol.
Isso é uma terapia! Eu adoro esse tipo de trabalho. parabéns
Be great to clean politicians with this procedure
What is the chemical to keep it from flash rusting
No one gonna talk about that there was a literal action figure on it
Well this one way to find 8 decades of bondo everywhere! 😂😂
This is when you know you’re dumping over 100K in a car
Hey, I love your vids but would you hold the phone sideways when videoing? It will make your content much better.
Where are you located? thanks Scott
So oddly satisfying. I rebuilt a 1965 VW Type III Notch and had it blasted to bare metal. This seems so much more thorough, although I’d worry about all the nooks, cranny’s and between two panels rusting over time.
The neutralizer fluid that the frame gets dipped in should inhibit that, hopefully lol.
I would oil spray the nooks and crannys just like how we do up here in the north for winter driving.
After painting I mean
Poor joker 😭😭😭😭so batman didn't kill him 😆😆😆
If you could turn your phone sideways to get 16:9 video rather than portrait, that would be awesome!
Thanks for sharing your work. I enjoy the process.
Thanks for watching! I appreciate your support
@@minute_of_dangle I like to know where you're business is , I have a 73 charger I'd like to get dipped. Could you share your business info with me on pricing also. Thanks
@@johnrossi2824 I just discovered this YT chan about an hr ago, first watching the latest upload vid & backpedaling thru older uploads, stoping to watch this one, as I’ve got a ‘55 Buick Super already taken apart & need this same process done on it now. Was wondering, after reading your comment, if you ever got a response &/or, figured out the rough cost for having this done? If better or worse than media blasting &, where this shop is??? I wonder also if this procedure includes any of the other body parts in the price?
@@seanbatiz6620 no he never said anything about his location or price to do it. Media blasting is ok but dipping is much better as far as I'm concerned.
He did give me a like to my reply and said thanks for supporting his Chanel. Can't tell you anything more . He should I bet he's probably got more cars than he can handle.
@@johnrossi2824 Thanks
Yall got the Joker reference, right?
I was curious how much does it cost? I will be doing a Ranchero soon. Nice work, ty for sharing.
AwesomeKool process like ASMR👍🏾🤠☮
Glad you liked it!!
Hi. What solution do you use to remove paint? ? ? Very cool video, like it)
Ótimo trabalho parabéns 👏👏
That body shell of that '55 Chevy alone is worth about 10 grand!!
Now that's a nice car.luv to see it finished 👍✌️
01:02 Headphone users have been warned. 😂
EDIT: Not loud. It just scared me going from the sudden relaxing sound of a bubbling caustic solution to a power washer. 😅
I know nothing about about running a business, but I’m guessing there must be all kinds of hassles of operating a chemical operation in addition to the regular headaches of running a business. But what do I know? (Shrugging)
But I do find your videos FASCINATING!
Fortunately I don’t deal with that aspect. We have to have all of our waste contained. We have a pit under the washbay that’s separate from our sewer drainage. The runoff is collected there. We then pump it out into evaporation tanks that have heat exchangers to evaporate all the water out of it. What’s left is a neutral sludge. We then pay a company who specializes in chemical waste disposal to dispose of it properly for us. We have to get soil and water tests around our shop every so often too.
@@minute_of_dangle Thanks for the explanation. I guess every business and every process has it’s own unique methods. Thanks for taking the to time reply. I nerd-out on this stuff.
Что за химия такая, что это с кузовами делаете?
Краску так разъедает раствор горячего демексида, но что они используют, мне тоже интересно. Рядом с такой ванной парящего демексида находиться было бы невозможно, он жутко воняет, может он в противогазе конечно это делает.
There's some questionable humor goin on up in there ,!!
The question is , why is there not MORE?!!!!
Can you provide your contact information so we might utilize your services?
Awesome video I'm looking to do a restoration where are you guys located?
Nanty glo Pennsylvania 3s chemicals llc
"Beware the man with a pig farm"... And the man with a chemical dip business.
I've had chameleon two of them and iguanas it died. I've had a dinosaur on a fish tank background.
the time hes done fixing that piece of shit he could have bought a new body
So you dipped once power wash then dip again and see power wash cool l like that
She’s gorgeous but a Plymouth Fury would be so much better.
That HAD to be a desert car. Wow! What a total lack of rusty cancer!
Man this is the stuff I've! As he said,I can only imagine the end result. Thanks for the share👍👍✌️
What kind of pressure washer setup are you using?
Reminds me of the movie Who Framed Roger Rabbit.
Where are u located at with dipping tanks sir?