IoT based Water Level Monitoring & Control System using ESP32, Waterproof Ultrasonic Sensor, & Blynk
Вставка
- Опубліковано 8 вер 2024
- IoT based Water Level Monitoring & control System using ESP32, Waterproof Ultrasonic Sensor, & Blynk
Altium Designer: For Schematic and PCB designing
www.altium.com...
Altium 365:
www.altium.com...
Octopart, components search engine:
octopart.com/
Download circuit diagram and programming: a detailed article
www.electronic...
Watch same video in Hindi/Urdu:
• IoT based Water Level ...
Related videos:
A02YYUW Waterproof Ultrasonic Sensor, Best
• Waterproof Ultrasonic ...
Wireless Water Level Monitoring 5Km range using LoRa and ESP32:
• Wireless Water Level I...
IoT based Water Level monitoring using ESP32, A02YYUW, and Blynk:
• Water Level Monitoring...
Wireless Water Level Indicator using LoRa (1.5Km range)
• Wireless Water Level I...
Arduino Water Pressure Sensor for water level monitoring
• Arduino Water Pressure...
ESP32 with TOF10120 Laser Rangefinder distance sensor for water level monitoring
• ESP32 with TOF10120 La...
IoT Water Level Sensor Using ESP8266 Nodemcu
• IoT Water Level Sensor...
iot Water level monitoring using Ultrasonic Sensor + Nodemcu esp8266 + Blynk
• Arduino iot Project: i...
Water level monitoring using ultrasonic sensor and leds
• Arduino Project: Water...
Support me on Patreon and get access to hundreds of projects:
/ electroniclinic
Project Description:
******
In today’s episode, you will learn how to make an IoT based Water Level monitoring and motor control system using the ESP32 WiFi + Bluetooth module, the waterproof JSN SR04T Ultrasonic Sensor just don’t worry if you see AJ-SR04M printed on the module. JSN SR04T and AJ-SR04M are exactly the same the only difference is that the AJ-SR04M has an empty location for a resistor and the JSN SR04T doesn’t have it. The amazing thing about this Ultrasonic Sensor is that, it comes with a long wire due to which it can be easily installed. Anyway, for this project we will also need an SPDT type relay to control a water pump and the new Blynk V2.0 for monitoring the water level.
Well, I have already created several videos on the water level monitoring system. But today's IoT based water level monitoring system is different from those projects, because many things have changed in the last few months. For example, Blynk V1.0, which was also known as Blynk Legacy, has now been replaced by Blynk V2.0. Additionally, this time I am using the JSN SR04T Waterproof Ultrasonic Sensor instead of the normal HC-SR04 Ultrasonic Sensor.
With the help of this project, now I can monitor the water level from any part of the world. This is fully automatic. When the water level decreases below a certain level the motor is automatically turned ON and when the water level increases to a certain level then the motor is automatically turned OFF. You can think of this Bulb as the water pump. This is a 220Vac Bulb. If you want to control a large water pump then you can use a power relay. I already have a video on the IoT power relay.
Now, let’s go ahead and take a look at the connections. So, without any further delay let’s get started!!!
*****
Amazon Purchase links:
*****************
ESP32 WiFi + Bluetooth Module (My recommendation), more IO pins, improved speed, and supports a Lipo Battery:
amzn.to/3v40DkE
JSN SR04T Waterproof Ultrasonic Sensor
amzn.to/3K4OOy4
HC-SR04 Ultrasonic Sensor
amzn.to/3M4A8ln
1-channel relay module
amzn.to/3ZAbvzQ
Other must-have Tools and Components:
Arduino Uno, Nano, Mega, Micro "All types of Arduino Boards":
amzn.to/3fk5OTi
Top Arduino Sensors:
amzn.to/3vZbnfM
Super Starter kit for Beginners
amzn.to/3cq56C5
Top Oscilloscopes
amzn.to/3ctF3d8
Top Soldering iron kits: "best"
amzn.to/39nqDtb
DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I will receive a small commission. This helps support the channel and allows me to continue to make videos like this. Thank you for your support!
****************
For more Projects and tutorials visit my Websites
Electronic Clinic:
www.electronic...
Programming Digest:
programmingdig...
Follow me on Instagram:
/ electroniclinic
Follow my Facebook Page Electronic Clinic:
web.facebook.c...
Follow my Facebook Group, Arduino Projects:
/ 190031841821771
Email:
stu_engineering@yahoo.com
#iotproject #waterlevelcontroller #altium365
IoT based Water Level Monitoring & Control System using ESP32, Waterproof Ultrasonic Sensor, & Blynk
water level monitoring project
how to monitor water level using waterproof ultrasonic sensor
waterproof sonic
GREAT JOB
thank you.
Very nice! As usual!
Thanks, Buddy...
Great
The sensor operating in the range from 20 cm to 450 cm. Do you have any suggestions to measure a very big distance say over 100 meter?
Please sir make esp32 home automation with blynk2.0 four relay with fan dimmer
you can watch my getting started video on the new blynk v2.0 and esp32.
Đây chính xác là những gì tôi đang cần, cảm ơn bạn rất nhiều. Nhưng bạn có thể giúp tôi một ân huệ không, tôi cần thay nước trong bồn mỗi 8h, 2 chế độ, tự động và thủ công. Tôi sẽ rất cảm kích nếu bạn có thể làm video hướng dẫn.
how can purchase direct full model
Do you have any issues on the water getting fogged up in the sensor due to evaporation, leading to inaccurate results or the sensor getting worn out?
I’m having this same issue with water condensing on the ultrasonic probe. Anybody found a solution?
You can try it out with small holes around the sensor instead of air tight
hai bos..could u give me an idea.. why i can measure the distance under 20cm..bcause i am using a small bucket of water..the minimum reading neead to above 20cm
The jsn sr04t cant measure distance below 20cm. You can use A02yyuw waterproof ultrasonic sensor.
@@ElectroniClinic oh i see..thank u very much..the information is really useful bcoz my due date for my project i really near..thanks a lot..
IP67 housing will be needed.
Does your device sometime gives false readings?? because I am facing this issue
I had tried this project 8 years ago. And sensor gave lot of false reading in between. It suddenly jumps to maximum reading in between. Was not able to complete the project. Hope there would be some newer codes which remove these errors by now.
I hate the background music😁😁😁