The O-ring on the piston broke on mine and I'm looking for a replacement O-ring so I can use the tank again, but I've looked online and I can't find anything, what should I do?
Great video! I have a leak at the stem of the regulator where the regulator meets the tank itself. Do you know where I can find the O ring for the regulator stem?
The fill nipple on mine is leaking... seems like there's a squashed o'ring that needs to be replaced on the internal valve... do you know what size? (It's too squashed for me to measure).
We do not know what size the o-ring is but we do carry the whole pin and o-ring assembly as one piece. Please reach out to us at our store and we can see about getting one sent out to you!
Unfortunately no it cannot be reoriented. Some regulators that be can are the Ninja Pro V2 and V3 regulators, any Powerhouse Regulator, and HK Aerolite 2 Pro Regulator.
Typically if you can manual press the pin the pressure is very low or the tank is empty. Always check the gauge as well if you have a compressed air tank, there is no gauge on a CO2 tank and unfortunately you cannot install a gauge on those tanks either. If you are ever in doubt and need to make sure your air tank is empty take it to your local shop and someone there can verify that it is empty for you.
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
The O-ring on the piston broke on mine and I'm looking for a replacement O-ring so I can use the tank again, but I've looked online and I can't find anything, what should I do?
Can i verify that you used Eclipse grease for the orings?
Yes you are correct!
Great video! I have a leak at the stem of the regulator where the regulator meets the tank itself. Do you know where I can find the O ring for the regulator stem?
The fill nipple on mine is leaking... seems like there's a squashed o'ring that needs to be replaced on the internal valve... do you know what size? (It's too squashed for me to measure).
We do not know what size the o-ring is but we do carry the whole pin and o-ring assembly as one piece. Please reach out to us at our store and we can see about getting one sent out to you!
Such a helpful video thank you. Can you do the Powerhouse Reg as well soon?
ua-cam.com/video/9eenCm8vWdQ/v-deo.html
Check out the link below!
Is the output adjustable on these regs if I remove some of the shims? Thanks
It will depend on which HK Army Regulator you are talking about but their base model regulator is not able to be adjusted.
Can the ASA portion on this regulator have it's orientation changed for people who use tank stocks? I've got a 13/3000 hk tank
Unfortunately no it cannot be reoriented. Some regulators that be can are the Ninja Pro V2 and V3 regulators, any Powerhouse Regulator, and HK Aerolite 2 Pro Regulator.
Would you guys do giveaways
We will sometime this year!
So if u press it nd no air comes oit that means it empty right?
Typically if you can manual press the pin the pressure is very low or the tank is empty. Always check the gauge as well if you have a compressed air tank, there is no gauge on a CO2 tank and unfortunately you cannot install a gauge on those tanks either. If you are ever in doubt and need to make sure your air tank is empty take it to your local shop and someone there can verify that it is empty for you.