I left the technic hobby few years ago as most my PF equippment had retired and they were too expensive to get. Now with cheaper buggy motors and servos as well as more aftermarket battery and receivers I got back! Looking to build a similar one
I think there’s a way to make it like the same strength, but a lot faster. The inner output is speed, it has 1600 rpm, the outer output has 1200 rpm and 119 mnm (torque) so the torque can handle like a 1:3 easily without loosing speed orhaving issues with accelerate.
Hello can you please say something more abouz modification of RC wheels to make them LEGO-compatible? Im worried there must be hight accurancy of wheel center if you dont wont to lose much mechanical power.
Hey there!!! I used 2 fake buggy motors with 2 Mould king batteries 4.0 however I’m experiencing POWER CUTS. Do you think the 6.0 are more powerful and stand more output?
Hi everyone, congratulations for the splendid channel! I would like to know what "M-Motor" is faster than to motorize a small and light Technic car. THX!!!
Hey I noticed the suspension rods hit the axles , (I’m sure you did to ). You could really get a LOT of suspension travel , if you figure out a way for them to dodge the axles.
Hello! I’m a trying to build this car and am having a hard time finding the CV joints you have in the instructions, could it be possible if a used the other type of CV joints for this build? Thanks!
I personally don’t believe it does. But if it does , it’s not enough to make a difference. Just get the fake one it works just as well. And USE BUWIZZ , these motors are very power hungry , 1 BuWizz per buggy motor if you want full power or if you want to use ludicrous or fast mode.
@@ludicrousbrickstudio oh ok lol your pretty well off when it comes to Lego electrics. I have two fake buggy motors , and am getting another buwizz 2.0 for Christmas.
Suspension is a bit hard. You should try original LEGO sevro since it can do proportional. Having dual motor drive is much better but needs a bit more power.
i think the pcb is different, the 3 electrical pads to steer left and right fully not proportional 15. the quality is bad due to making 3RD PARTY MOTORS. the planetary drive reduction is similar to the original. the price is now cheaper. RB reviewed Chinese motors from alli I think the new small motor in servo mode due to encoder position (0-360 degrees).
I left the technic hobby few years ago as most my PF equippment had retired and they were too expensive to get. Now with cheaper buggy motors and servos as well as more aftermarket battery and receivers I got back! Looking to build a similar one
You sir is what we call a young talented boy. I'm 73 years old and I'm very impressed with your skills!!!! Keep the good work folk!
@Demalpla, je v k de voir 😁v v ds et o9pp
@Demalpla the guy doesn't care if you don't care about his age
Top notch Lego video!
This is amazing, might buy mould king, and fake buggy motor to make a really fast car.
I think there’s a way to make it like the same strength, but a lot faster. The inner output is speed, it has 1600 rpm, the outer output has 1200 rpm and 119 mnm (torque) so the torque can handle like a 1:3 easily without loosing speed orhaving issues with accelerate.
You mean that is more efficient to use the outer output and accelerate it with gears than the inner put and deccelerate it with gears ?
Amazing !!! How can I build this monster? Can I get the ins ?
i have original pf rc set , 3-4 days ago i bought fake buggy motor ; buggy motor with pf receiver is soo bad the car can't even accelerate
Good work. Where can I buy this ?
Do you know how far this can go without losing signal?
А где можно купить такие диски и шины?
Use ble, Bluetooth or wifi?
Hello can you please say something more abouz modification of RC wheels to make them LEGO-compatible? Im worried there must be hight accurancy of wheel center if you dont wont to lose much mechanical power.
Wow! Impressive!👍
We need instructions pls
Hey there!!! I used 2 fake buggy motors with 2 Mould king batteries 4.0 however I’m experiencing POWER CUTS. Do you think the 6.0 are more powerful and stand more output?
Hi everyone, congratulations for the splendid channel!
I would like to know what "M-Motor" is faster than to motorize a small and light Technic car. THX!!!
I have a question Iam from Germany how long is the delevery time? And cool buggy
Do you know how many volts that Chinese power module uses? 11.1V or 7.4V?
Hey can I get some specs on that new battery you're using there? And does it have it's own receiver?
Hey I noticed the suspension rods hit the axles , (I’m sure you did to ). You could really get a LOT of suspension travel , if you figure out a way for them to dodge the axles.
it drives so good! i have to make of these now :P. what music did you use?
unto ashes, ignite violet
@@Deutscherreichsbuerger thanks
Great videos. I also approve of the assetto corsa music :)
How did you connect the motor to the wheels I see no connection to the axle
Is the steering and speed proportional with this unit?
MacPherson suspension ))
Hello! I’m a trying to build this car and am having a hard time finding the CV joints you have in the instructions, could it be possible if a used the other type of CV joints for this build? Thanks!
@@adriablancafort Thanks!
What’s the song called?
please Building Instrucions
Video good 👍
O shit asseto corsa intro music XD
Pretty cool vehicle you’ve made. But it seem has many problems when the fake motors powered by a buwizz battery in 11.2V.
@@adriablancafort yeah, I know
@@SeconYan i reply to maxplex
Guys I’m using 2 fake buggy motors, each one powered by 1 Mould king 4.0 battery box. Protection circuit kicks in constantly also. Advises?
Pls instructions pls pls
I like how you did the Suspension this time
Also it Performance is verry good as usalally great :D
@@adriablancafort yes but like how you made your own shockers :D
A part del cotxe, l'edició de video exelent 👏🏻👏🏻
Can you replace the fake cv joints with real ones?
bricklink is easier now.
Lovely car 🔥
Great work!! I ordered also this battery and controller, it is great!
Is it better or worse than buwizz?
Does the Chinese buggy motors have less turning resistance than LEGO or buwizz motors?
I personally don’t believe it does. But if it does , it’s not enough to make a difference. Just get the fake one it works just as well. And USE BUWIZZ , these motors are very power hungry , 1 BuWizz per buggy motor if you want full power or if you want to use ludicrous or fast mode.
@@EMotoGuyyy thx! I have two buwizz and two buwizz motors:)
@@ludicrousbrickstudio oh ok lol your pretty well off when it comes to Lego electrics. I have two fake buggy motors , and am getting another buwizz 2.0 for Christmas.
Is the MouldKing steering and driving analog?
@@adriablancafort I guess, they are. Saw it in some other videos and ordered two sets.
So, I hope, I am right. :-)
nice
Plis tutorial
Nice :v
great job, battery duration?
Plenty for a few days worth of play , just charge when the light is flashing orange or red
What this amazing music is?
@@adriablancafort I hope that too
Sadly the toll prevents me from getting these amazing parts 🥲
Ignite Violet - Unto Ashes
Suspension is a bit hard. You should try original LEGO sevro since it can do proportional. Having dual motor drive is much better but needs a bit more power.
3 vs 15 ?
ua-cam.com/video/8cFVG5IRwjI/v-deo.html
I teardown the Chinese servo from my channel.
i think the pcb is different, the 3 electrical pads to steer left and right fully not proportional 15.
the quality is bad due to making 3RD PARTY MOTORS.
the planetary drive reduction is similar to the original.
the price is now cheaper.
RB reviewed Chinese motors from alli
I think the new small motor in servo mode due to encoder position (0-360 degrees).
reply to top
You know if you get a BuWizz motor it would be a lot faster
1 st
@Лего Самоделки ?
Russian comment?