TBS6900 stand alone CI/CI+ a pcie card to use as a network resource

[@gtdorin]

Hi, where can i download web ui?

[@laszloperesztegi]

6:00 what's the title of the movie? :D

[@jackbauer2170]

Where can we find TBSremux and/or some example code with dvblast etc? thanks

[@ovidiuss31]

example
6900 is loaded in /dev/dvb/adapter1
# ls /dev/dvb/adapter1/
ca0 ca1 demux0 demux1 dvr0 dvr1 frontend0 frontend1 net0 net1 sec0 sec1
ca0 demux0 dvr0 fronten0 net0 and ca1 demux1 dvr1 fronten1 net1 sec1 is virtual dvbs adapter
sec0 and sec1 is 6900 device
1. use astra or dvblast to streaming

streaming to local network, eg:
udp://192.168.8.188:3001
192.168.8.127:9981/channelnumber/1


2. recive some spts and generate a new ts ,then send to /dev/dvb/adapter1/sec0 or /dev/dvb/adapter1/sec1


192.168.8.127:9981/stream/channelnumber/1
192.168.8.127:9981/stream/channelnumber/2
192.168.8.127:9981/stream/channelnumber/3 ----------> remux ---------> a new mpts -----> /dev/dvb/adapter1/sec0
192.168.8.127:9981/stream/channelnumber/4
192.168.8.127:9981stream//channelnumber/5


udp://192.168.8.188:3001
udp://192.168.8.188:3002
udp://192.168.8.188:3003 ----------> remux ---------> a new mpts -----> /dev/dvb/adapter1/sec0
udp://192.168.8.188:3004
udp://192.168.8.188:3005




3. output
use dvblast scan virtual dvbs signal
if write to /dev/dvb/adapter1/sec0 , scan like this
dvblast -f 10988000 -s 43200000 -v 13 -a 1 -n 0 -y 0 -c dvb.conf (-a 1 adapter1 -n 0 /dev/dvb/adapter1/frontend0 -y 0 /dev/dvb/adapter1/ca0)
if write to /dev/dvb/adapter1/sec1 , scan like this
dvblast -f 10988000 -s 43200000 -v 13 -a 1 -n 1 -y 1 -c dvb.conf (-a 1 adapter1 -n 1 /dev/dvb/adapter1/frontend1 -y 1 /dev/dvb/adapter1/ca1)


#dvb.conf
239.255.0.1:1234 1 1
239.255.0.2:1234 1 2
239.255.0.3:1234 1 3
239.255.0.4:1234 1 4
239.255.0.5:1234 1 5

[@jackbauer2170]

@@ovidiuss31 correct, but it loads in adapter0, in adapter1 i have a 5520se.
When 5520se is stand alone i can scan and tune, when the 6900 in in the way I can't tune to any freq anymore
EDIT: sorry, didn't read the full reply, was hidden under "read more". will try again

[@الوطنتبقيدايم]

@@ovidiuss31
Hi could i have your mobile

[@chechensoft_ru]

Can you use cam module "CI plus" or it support only "CI"?

[@ovidiuss31]

Depends on software, readers are just blind readers, if the software used is capable to handle CI+ then the readers will work

[@Hammersch]

@@ovidiuss31 Thanks for deleting my comment!

[@MP_7]

are you sure CI+ is supported? One thing is simple CI and CI+ is something else !

[@ovidiuss31]

Any dvb tuner with ci slot can support ci/ci+ with the proper piece of software, for example minisatip

[@MP_7]

@@ovidiuss31 didn't know that, thank you.

[@weidazhang2584]

可以收看使用，ci+解密卡吗

[@ovidiuss31]

当然是

[@abdeldjelilmohammed8090]

I need it but it's too expensive