Absolutely fantastic video!! Thank you so much. I’m a 51 year old lady and I fixed my fiat on the side of the road, watching this video. Super grateful to you. Love your hat 😊
Before you replace the switch spray the end (which should pop out) with WD40 High Performance Silicone Lubricant. One fault is the switch sticks in the 'in position' so when the brake is applied it does not pop out setting off the dash warning. You can see this if you apply the brake. The end of the switch should be free moving.
Just in case anyone finds this helpful video like I did and needs the part numbers here they are... 46840510, 60669020, 60801906, or 1543231. I ordered Mopar 60669020 for my 2012 Fiat 500 TwinAir 900cc UK spec in Japan.
Hello, I have one question: Does the engine check yellow light open because of the faulty asr/hill holder switch? I see that after you solve the problem and you ignite the car the engine check light turns off, but at the beggining of the video you don’t start the car, so you have on both lights(engine chech & asr lights).
I have already replaced this and the warning lights are still on, however I was silly and didn’t disconnect the battery could this be why it hadn’t taken the warnings off
Hill Holder Unavailable - ESP Unavailable. Red EPS failure, hard steering, MES Fit Software codes for brake light ( all great on brakes ); plus C1001-049, internal fault steering column My once restart after 2-3 miles, clears, steering feels natural, only 24,000 miles I'm thinking not Steering Column but earthing problem or main ECU? Anyone similar
Impresive! 😃 Your video assists me to understand how to fix the faults. I have a same car (2008 version) from HK, and also got the same error issue! May i know how can you buy the Hill holder device? because i cannot find this in HK.
I have ESC HILL HOLDER + TIRE PRESSURE + CONTROL ENGINE with abarth. I changed the brake contactor.... still have the problem. Brought it to Abarth 2 times. They never fixed the issue.
Did you get it fixed? I swapped the brake switch and throttle body thus far. Next is the accelerator pedal itself. I also suspect the harness in the rear tailgate.
My wife's 2018 abarth has just thrown up the exact same warning lights. Searching yt I found your comment. Did you get it fixed? And if so, what was the procedure etc. Many thanks in advance
YOU are a super star, spent £12, literally 2 mins to replace and all errors all gone, best youtube fix ever..
May I know the part name & number?
Absolutely fantastic video!! Thank you so much. I’m a 51 year old lady and I fixed my fiat on the side of the road, watching this video. Super grateful to you. Love your hat 😊
Ur bloody awesome ty even my ford garage could not fix this, you bloody legend u ❤❤❤❤❤❤❤❤
Thanks this was very helpful, had the same problem with my Abarth 500.
Awesome thank you so much for choosing my video to watch
Thanks mate, my wife's car just threw up those warnings this morning. Great video, thanks for the help 👍
Before you replace the switch spray the end (which should pop out) with WD40 High Performance Silicone Lubricant. One fault is the switch sticks in the 'in position' so when the brake is applied it does not pop out setting off the dash warning. You can see this if you apply the brake. The end of the switch should be free moving.
Yeah the good old toolbox in a can 😀
The one in mine did need a replacement part but good to try ur idea 1st to see if it helps before looking into a replacement,
@@fatandhappykid Worked for me. Hope it helps others.
When you say spray the end. Which part do you mean? The white part? And do I spray all over ?
Solid video. Just changed this on my abarth. Seems to have solved it. Thanks
What's the part number pal. For the abrath
Excellent video!
May I ask the part number of the switch please?
Cause he ain’t what part it is 🙄
Just in case anyone finds this helpful video like I did and needs the part numbers here they are... 46840510, 60669020, 60801906, or 1543231. I ordered Mopar 60669020 for my 2012 Fiat 500 TwinAir 900cc UK spec in Japan.
Hello,
I have one question: Does the engine check yellow light open because of the faulty asr/hill holder switch?
I see that after you solve the problem and you ignite the car the engine check light turns off, but at the beggining of the video you don’t start the car, so you have on both lights(engine chech & asr lights).
nice Tip, even our drive side be on left i will follow your steps - tks and regards
Ill be trying this, my fiat randomly started this today of all days
I will be trying this tomorrow fingers crossed 🤞
Did it work??
Thanks. Hopefully this fixes mine 😊
what is the name of the substituted piece?
I have already replaced this and the warning lights are still on, however I was silly and didn’t disconnect the battery could this be why it hadn’t taken the warnings off
Thank you thank you thank you!!!! You are a lifesaver ❤️
Please say name of part and supply part number.
The break switch
This was useful. Thanks.
Does anyone no if this works on bravo t jet as no power steering and shows eps unavailable.
Very helpful!! 🙌🏼
What exactly is that fuse called please
Thanks. Now I know where it is.
Toppppp sei stato grande
Love Angus tattoo !
Thank you
Hill Holder Unavailable - ESP Unavailable. Red EPS failure, hard steering, MES Fit Software codes for brake light ( all great on brakes ); plus C1001-049, internal fault steering column
My once restart after 2-3 miles, clears, steering feels natural, only 24,000 miles
I'm thinking not Steering Column but earthing problem or main ECU?
Anyone similar
Impresive! 😃 Your video assists me to understand how to fix the faults.
I have a same car (2008 version) from HK, and also got the same error issue! May i know how can you buy the Hill holder device? because i cannot find this in HK.
Hey there thanks for watching, its called a brake pedal switch is the part that I replaced
@@fatandhappykid Thank you so much! i will try your solution~
I have ESC HILL HOLDER + TIRE PRESSURE + CONTROL ENGINE with abarth. I changed the brake contactor.... still have the problem. Brought it to Abarth 2 times. They never fixed the issue.
Did you get it fixed? I swapped the brake switch and throttle body thus far. Next is the accelerator pedal itself. I also suspect the harness in the rear tailgate.
My wife's 2018 abarth has just thrown up the exact same warning lights. Searching yt I found your comment. Did you get it fixed? And if so, what was the procedure etc. Many thanks in advance
👌