Just by using the stock wifi antenna helps a lot. Used to be my bluetooth 5.0 headphones could not make it outside the house. I got a new motherboard with new wifi adapter that came with two wifi antennas. My old wifi adapter had the connections but did not come with antennas. Now I can reach the yard which allows me to listen to videos while cutting grass! I watched this to get ideas on how to extend my range even further.
There are a few things that can't be reinvented. They are wheel and antenna. A particular frequency resonates at particular wavelengths: half, quarter, etc. and antennas are made to resonate at that frequency to tune in to the the desired signal. That's all. Now, the make up time 😄! The transmission range and data throughput depend on the transmission power and receiving sensitivity of your device, type of antenna: omni or directional, how you utalise it for your unique requirement, how good is the MIMO algorithm inside your device, obstructions: trees, walls, buildings, etc. The antennas in this video are omnidirectional half or quarter wave antennas, some are two parts: one for 2.4GHz and 5GHz WiFi. That's all.
What if the wire that connected to cable was broken, our anthena wire was broken.becausee it got pull our wifi is still working but its weaker is our canbe fixed pls reply i need your help
There's some theory to study, but roughly... For those antenna which are just that cylinder with a wire poking out, those are simple half-wave dipoles. They are the most simple antenna, but also very effective and often used either as-is or as a component within something more elaborate. One drawback of a dipole is that the connection for the feed wire must be made in the middle, and that feed cannot run in parallel with the antenna but must be perpendicular. That's a problem if you want your antenna-on-a-stick, as we have here. One solution is that hollow cylinder. It forms half of the antenna (the wire poking out is the other half), but because it's hollow it also serves to 'hide' the feed wire electrically. This just allows the connection to be placed in a more mechanically convenient location: On the end, rather than in the middle. The basic antenna like that is single-band only - 2.4 or 5GHz band, but not both. To operate on both bands is a little more difficult. That's what the ones with the coil in the middle are for.
Will those antennas still work if you put them back together ? One of my antennas looks like the black covering is not on all the way, does that mean it is busted ?
Just by using the stock wifi antenna helps a lot. Used to be my bluetooth 5.0 headphones could not make it outside the house. I got a new motherboard with new wifi adapter that came with two wifi antennas. My old wifi adapter had the connections but did not come with antennas. Now I can reach the yard which allows me to listen to videos while cutting grass! I watched this to get ideas on how to extend my range even further.
There are a few things that can't be reinvented. They are wheel and antenna. A particular frequency resonates at particular wavelengths: half, quarter, etc. and antennas are made to resonate at that frequency to tune in to the the desired signal. That's all. Now, the make up time 😄! The transmission range and data throughput depend on the transmission power and receiving sensitivity of your device, type of antenna: omni or directional, how you utalise it for your unique requirement, how good is the MIMO algorithm inside your device, obstructions: trees, walls, buildings, etc. The antennas in this video are omnidirectional half or quarter wave antennas, some are two parts: one for 2.4GHz and 5GHz WiFi. That's all.
Thx for valuable information 👍🏻👍🏻
antenna that is shown at the end of the video, including what type of omni antenna?
Thanks..now i can make a diy antenna
Bhai antenna banane ke liye copper wire ka use karu ya aluminum wire ka use kru kaun sa best network dega?🙏🙏🙏🙏🙏🙏🙏
Helpful video
Somebody knows if those 12dBi antennas sold on AliExpress have good quality? I want to buy the best antenna possible for my Wi-Fi + Bluetooth card
What if the wire that connected to cable was broken, our anthena wire was broken.becausee it got pull our wifi is still working but its weaker is our canbe fixed pls reply i need your help
thank you for your valueable information, would you let me to use your video as a source of my video task?
My wifi antena wired had came off at the base where the female thread goes to connect to the make end. How do you repair that?
Thank you
Bhai
Thank you!
what is the purpouse of the brass hollow cilinder?
There's some theory to study, but roughly... For those antenna which are just that cylinder with a wire poking out, those are simple half-wave dipoles. They are the most simple antenna, but also very effective and often used either as-is or as a component within something more elaborate. One drawback of a dipole is that the connection for the feed wire must be made in the middle, and that feed cannot run in parallel with the antenna but must be perpendicular. That's a problem if you want your antenna-on-a-stick, as we have here. One solution is that hollow cylinder. It forms half of the antenna (the wire poking out is the other half), but because it's hollow it also serves to 'hide' the feed wire electrically. This just allows the connection to be placed in a more mechanically convenient location: On the end, rather than in the middle.
The basic antenna like that is single-band only - 2.4 or 5GHz band, but not both. To operate on both bands is a little more difficult. That's what the ones with the coil in the middle are for.
How to attach antenna to D Link DIR 816? I'm upset with my wifi router 🤕
At 2:36, what company make that antenna or what is the name of the router you got it from
Românca mea
Tenda
You only heated the outer plastic housing and not the metal wire inside
Brother this is all coper or which mattle
you should strip the wires, how many wires are running inside the insulation. does it contain like a grounding wire or something
Vai amar marcel smart tv ekti wifi antenna lagbe kintu pascina amar lagbe pin soho jukto jeta please janaben
Will those antennas still work if you put them back together ? One of my antennas looks like the black covering is not on all the way, does that mean it is busted ?
The plastic has no function electrically, it's just to protect the antenna within.
Finally using only copper wire .for these setup they r costing 3k for 20dbi
bro pwede mo vedio kung ano ang laman ng parabulic antenna pleases lang po para sa lahat
Cctv k wifi antenna Tut Gaya he kya kare
How to connect antenna wire
>>> ua-cam.com/video/H18Ra8njjHc/v-deo.html
@@zealm1191 sir pwede pa shoooot ng ano ang nasa loob ng mimo antenna and parabolic antenna
Bro what is the name of the wire inside tenda router antenna.
You can use copper wire >>>>ua-cam.com/video/H18Ra8njjHc/v-deo.html
Tar toot gayo he joint te
Over slowly show so I'm not interested.
এটার দাম কত?
Jispe tape lugadiya wo buch gaya jo sahi lug wo chud
useless speechless vids why?