The advantage of two clamps is that you have torsional stability meaning the hanging clamps don’t go loose. They are fairly big lights so I would want two clamps. It’s a nice bright light and I imagine they are good value. However, I never found the Chinese lights to be very reliable with no spares available when they inevitably go wrong. You only have to open one of these lights up to see the cheap components and little counterbalancing. Thanks for the review.
When I linked two lights together, the second light cannot be controlled independently of the first, They are 18 channel fixtures. I set the first fixture to channel one and the 2nd to 19. That didn’t work. I tried all channels going up from 19 to 30. It doesn’t work. If I said set it back to channel one it works. It’s not the cable coming out of the DMX controller if I plug that directly into the second fixture it works. How did you control the individual fixtures Independently, please? I’m just using a standard slider DMX controller. Thank you.
Make sure that the moving heads are in the correct channel amount mode. Many moving heads have a separate mode so that you can switch it to a lesser amount of channels, obviously this mode has less functions. Make sure your 18 address moving head fixture isn't in (e.g. 16 address mode). If they are in the correct mode then you need to make sure you are sending DMX signal to address 1 and to address 19 so that when you are not using the first light you can control the second light from address 19 and onwards.
The advantage of two clamps is that you have torsional stability meaning the hanging clamps don’t go loose. They are fairly big lights so I would want two clamps.
It’s a nice bright light and I imagine they are good value. However, I never found the Chinese lights to be very reliable with no spares available when they inevitably go wrong. You only have to open one of these lights up to see the cheap components and little counterbalancing. Thanks for the review.
ay dj were you at you haven't posted for a month
I have two of those and they are amazing bro you should like em they’re awesome
When I linked two lights together, the second light cannot be controlled independently of the first, They are 18 channel fixtures. I set the first fixture to channel one and the 2nd to 19. That didn’t work. I tried all channels going up from 19 to 30. It doesn’t work. If I said set it back to channel one it works. It’s not the cable coming out of the DMX controller if I plug that directly into the second fixture it works. How did you control the individual fixtures Independently, please? I’m just using a standard slider DMX controller. Thank you.
Make sure that the moving heads are in the correct channel amount mode. Many moving heads have a separate mode so that you can switch it to a lesser amount of channels, obviously this mode has less functions. Make sure your 18 address moving head fixture isn't in (e.g. 16 address mode). If they are in the correct mode then you need to make sure you are sending DMX signal to address 1 and to address 19 so that when you are not using the first light you can control the second light from address 19 and onwards.
Hey what lightning software are you using and what are you using to connect them to your pc?`
myDMX 3.0 DMX ($300) but there are some free options like freestyler as well using a dmx interface that is compatible.
Nice
Thank you for choosing stage lighting which MADE IN CHINA
Done watching DJ✅
New subscriber Dj🫡