How to Replace Front Driver Side Lower Control Arm with Ball Joint 2002-2007 Chevrolet Trailblazer
Вставка
- Опубліковано 28 лис 2024
- Buy Now!
New Control Arm with Ball Joint from 1AAuto.com trq.video/ib-1...
This video shows you how to install a new quality TRQ lower control arm with ball joint in your 2002-2007 Chevrolet Trailblazer. Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear, or integrated ball joints that require replacing the entire arm when they wear.
This repair was done on a 2007 Chevrolet Trailblazer LT 4.2L Sport Utility 4-Door 4WD Automatic and the process should be similar on the following vehicles:
2002 Chevrolet Trailblazer
2003 Chevrolet Trailblazer
2004 Chevrolet Trailblazer
2005 Chevrolet Trailblazer
2006 Chevrolet Trailblazer
2007 Chevrolet Trailblazer
2008 Chevrolet Trailblazer
2009 Chevrolet Trailblazer
Tools you will need:
• Pry Bar trq.video/o2M-...
• 15mm Wrench trq.video/o5h-...
• 21mm wrench
• 15mm Socket trq.video/obMP...
• 18mm Socket
• 19mm Socket
• 21mm Socket
• 22mm Socket trq.video/oqs-...
• 36mm Socket trq.video/ocI-...
• 7mm Socket trq.video/obrq...
• Brake Caliper Hanger trq.video/okD-...
• Pickle Fork
• 1/2 Inch Ratchet
• 1/4 Inch Ratchet trq.video/obrq...
• 3/8 Inch Drive Ratchet trq.video/obMP...
• Torque Wrench trq.video/oaUR...
• Gloves trq.video/oaAK...
• Safety Glasses
• 10mm Hex Socket
• 7mm Allen Wrench
• Floor Jack trq.video/oaiY...
• Hammer
• Jack Stands trq.video/o7d-...
• Pole Jack
• Punch
• Wheel Chocks
Subscribe: / @trq
Check out our playlist:
Chevy Trailblazer 2002-2009 1st Generation: • Chevy Trailblazer 2002...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
This video was posted just in time for me to fix up my moms Trailblazer! Much appreciated.
Concise tutorial, no bull and no skipping the hard parts. Very well done.
THIS!, This is an absolutely great video my man. I just discovered that mine needs to be replaced As well , While there are quite a few pretty good video's out there, yours is on a different level.
Wow that's alot of work. My envoy needs control arm bushings
Your videos are really helpful, thank you so much for making them.
How do yk once you’ve gotten it into ride height position
was going to say tools required would be nice but its all listed in the description.
WHAT ABOUT THE BACKING PLATE?
Where do you get copper anti sieze spray????( 🎉 I've looked in three stores! I'll just paint 🎨 on permatex anti sieze lightly, but where do you find SPRAY? We saw gold gasket maker, so not that... (*?)
How did you diagnose this? I ask because I have an annoying pop noise when driving in and out of the garage and it is getting worse. My mechanic tightened a number of suspension parts and everything thing has been replaced at least once with 318k miles. The mechanic said everything is fine but a couple years ago there was a noise that no one could diagnose a Lincoln dealer discovered a cracked tranny mount. Thank you.
GMC envoy llega el mismo torque?
Can bad shocks cause eyhe ride height to sit lower than normal?
Hey 2004 Chevy blazer how remove video (lower control arms) and new lower control arms replacement send me video please. I don’t want suggest hard work on lower controls arms.
Nice work!