Making Leather Coin Case
Вставка
- Опубліковано 22 чер 2018
- I made a coin case with a leather craft.
It is a very easy-to-use structure because it can spread out the coin to Kabuse's part and take it out.
Up to two cards will be included. I also patronize it as a substitute for wallet because some bills also enter.
In this time, I tried to remodel the gore a little widely, using the previously made pattern paper.
leather-craft.net/leather3467
【size】
7 cm in length × 10 cm in width × 3 cm in thickness (about 1 cm crushed) - Навчання та стиль
If you find any unauthorized reproduction of the JSK-koubou video, please report it to me.
Thank you.
JSK-koubouビデオの無断複製を見つけた場合は、報告していただけると助かります。
今回はコインケースです。
ヌメ革で作ったものを愛用しているのですが、少し落ち着いた色のケースが欲しくなったので黒で作ってみました
糸は青を使いましたが、このデザインなら黒で統一したほうが良かったかもしれません。
紙幣も多少入るのでセカンドウォレットとしても使えますよ。
So beautiful. Both in design and craftsmanship. Thank you for sharing!
Really beautiful and great work! 👌👌👌 Astonishing selfmade press. Gorgeous idea. 👍👍👍
The stitching hole making jig is BRILLIANT!
Tienes un arte en las manos impresionante Felicidades
Nice work men, thank you for share it...
ありがとうございました。 あなたは非常に熟練しており、働いているのを見て楽しむことができます。
看您的视频是一种享受
Very nice. I like it. Thank you for sharing.
Nice job
Hello
Do you have a pattern/template for this? I really like the design!
I think the first 1:40 are wasted video time, but I really like
- the DIY pressing machine shown from 3:52
- the needle fixing techique at 9:28
- free hand cutting 10:45
Thanks
Edy
とっっても良いですね!
売って欲しいです…
作品販売などはされていますか?
Do you sell on etsy?
お、今回も良い出来ですね。
使いやすそう( ^ω^)・・・
ありがとうございます。
マネークリップ造りたいのですが、厚さはどれくらいの革でつくればいいですかね?
Pretty neat! Did you make that press?
I will introduce it in recommended links in the video.
↓
ua-cam.com/video/Yx4l_cJQKwg/v-deo.html
thanks
感觉有点厚了。
Do you have a website where this item is purchaseable?
Great video, thank you!
Please refer to it.
thanks.
革の厚さって何ミリでしょうか?
素晴らしいです。型紙購入を検討してます。
ありがとうございます。
是非お役立てください。
Juda zo‘r
at 1:42 you apply a product to the piece of leather, What is that and what is it for? thank you
She apply some type of leather finish burnisher gum like tokonole (Japan) or tragacanth . You can easily find it in special stores with chemicals for leather. It make the edge and back side of leather very smooth. Really nice thing. You can do without it for the edge burnishing, but for back side of the leather this thing is must have I suppose.
Sorry for asking, but whay the hell is that @3:32 ? Mind if you answer sire ☺️
日本語ですみません。
”トコノール”と言う製品です。商標なので海外で同じものが売られているか分かりません。
Erai desu ne.
I hope I typed that correctly.
А лекала есть ? Выложи если не жалко!
Здраствуй уважаемый ! Спасибо за видео. Работа великолепна! Если не трудно скинь ссылку где купить шило и нож,которым резал торец.Заранее благодарен.
что так сложно?
Is your shop "japanese only"? An English translation would be great!
I'm sorry. It is only in Japanese.
Please correspond with Googl translation etc.
こちらの型紙の長方形作ったんですけどカード入りませんよ?
革が伸びることも考慮してギリギリのサイズにしています。指定の位置よりも内側を縫ってしまうと入りません。
少なくとも、同じ型紙で実際に作って問題ないことを確認しています。
型紙は自作ですか??
もちろん自作ですよ。
他のクラフト作品も、すべて自分で設計して作っています。
おつかれさま
Качество нормальное, но уж слишком много лишних телодвижений.
型紙購入したのでよろしくお願いします
型紙を購入しコンビニでプリント(プリントサイズはデータのまま)してきたのですが、5cm基準が実際に計ると4.8cmしかありませんでした。ちょうどよく拡大も出来ずどうすれば良いですか?
家庭用のインクジェットで等倍印刷すれば問題ありませんが、レーザープリンターで少し小さくなることがあります。
その場合、4.8cmで印刷されたデータを104%ほどで拡大コピー印刷すればおおよそ5cmになると思います。
また。コメントはサポート用の問い合わせではありません。
気が付かないことがあるのでStoresの問い合わせフォームからお願いいたします。
まずわこちらにコメントしてしまい申し訳ありませんでした。自宅のプリンターが故障していたためコンビニを利用したのですが、アドバイス頂いたようにコンビニで拡大コピーしてみます。縫いのピッチは…頑張ってみます。
素晴らしい仕事! すみません、白と青の缶の液体の種類を教えてください。 ありがとう!.
大阪でレザークラフトの仕事をどうしてもしたいのですが、ありませんか?あれば連絡先教えてください。職人になりたいです。
Você sabe fazer tudo!? 😡
yeah made in china all product is low quallity
Do you have a website where this item is purchaseable?
Do you have a website where this item is purchaseable?