Wow! This is maybe the only video I've found on the whole internet, which shows what's inside that mystery EPBM box. Thank you! Sir, Your video gives me a hope, that maybe I can repair my "EPB problem" which looks exactly the same, just different car (Ford Smax/Galaxy 2006-)
Excellent. I had the similar issue with my Volvo s80. I opened the epb module long time ago. Just don’t know where to start. I will check the mosfet. Thank you again
I have the same issue (Audi Q5, 3.0TDI) , the same control light... Since it appeared i am not able to use gearbox, due to that even not start the engine... i am gonna replace both MOSFETs today and let you know about my experience. Thank you very much!
Thank you, it's a very nice video. You are very clever . Can you help me with errors on the EPB. I have a vw passat. It's the same problem. I have changed, bought a used car and changed the strynen unit for the electric parking brake. I want to repair old . The same car has the same problems with the reversing sensor, which I want to repair
Thanks for this informative video. I’ve been plagued with epb issues for a few years now. Mainly the wiring hasn’t been robust enough for my climate but now I have a similar fault with just one wheel on my Passat. It’s not so easy to access as yours as it under the centre console. I’ll substitute the module with a used part I think and then take it from there. It’s a very confusing system to work on as the dtc don’t actually help much other than identifying the wheel. Great work.
@@PSICompanyPerformance hello sir I HV issue with q3 2018 right hand drive in India..DTC c200d12 .left parking brake motor voltage supply short to B+ C10E129 Par king brake motors .implausible signal Both are active Pls reply
@@adnabandasha3201 thanks for watching. That is the same issue i had in the car in this video. In this case it can be the transistor or the double relay you need to test those.. Good luck
I checked 4 mosfets. Seems they are fine. Both relays also click. My error code are lost communication between pbm and bcm; pbm and cem; red park brake warning light flashes all the time. What parts on the circuit should I check? Resistance between signal wires is 61.8 ohms. Seems can bus wires are ok. Appreciate any suggestions. Thank you
Thanks for watching. In order to help you i would have to have a pbm in my hand now...but i dont , so i cant really tell you where to look regarding that dtc...i will as soon as i get a car with a similar issue i will try to dissect the entire board to help people in many other errors than the ones i get. Good luck
Olá PSI, precisaria da sua ajuda com um problema similar num A5, e teria todo o prazer em levar a viatura à sua oficina. Haveria forma de entrar em contacto consigo directamente? Obrigado
Question: I must change the EPB module on a 2010 Audi A6 Avant and, considering the age of the vehicle, want to avoid paying the 900 euros that Audi are asking me to fit a new one. Buying a second-hand EPB module and fitting it is within my limited mechanical skills. I can also buy the plug. Together, these 2 items are rather inexpensive. But, where/how can I buy the module programming software and how much does it cost please? Thanks.
thanks for watching. you can buy the cable and software from many places on the internet Ross tech , Vagcom, Vag commander, abrites, etc all of the above will code this module to the car. Make sure you choose a version that is compatible with the cars age. good luck
Thanks for watching... I show in the video both the original and the replacement transistor refences... I bought the replacement from Mauser.com. Good luck.
Wow! This is maybe the only video I've found on the whole internet, which shows what's inside that mystery EPBM box. Thank you! Sir, Your video gives me a hope, that maybe I can repair my "EPB problem" which looks exactly the same, just different car (Ford Smax/Galaxy 2006-)
Thanks for watching.
I never openned a Ford epb module but i guess it will be the same principle since it does exactly the same function.
Good luck
Excellent. I had the similar issue with my Volvo s80. I opened the epb module long time ago. Just don’t know where to start. I will check the mosfet. Thank you again
I have the same issue (Audi Q5, 3.0TDI) , the same control light... Since it appeared i am not able to use gearbox, due to that even not start the engine... i am gonna replace both MOSFETs today and let you know about my experience. Thank you very much!
good luck my friend and thanks for watching
Thank you, it's a very nice video. You are very clever . Can you help me with errors on the EPB. I have a vw passat. It's the same problem. I have changed, bought a used car and changed the strynen unit for the electric parking brake. I want to repair old . The same car has the same problems with the reversing sensor, which I want to repair
Thanks for this informative video. I’ve been plagued with epb issues for a few years now. Mainly the wiring hasn’t been robust enough for my climate but now I have a similar fault with just one wheel on my Passat. It’s not so easy to access as yours as it under the centre console. I’ll substitute the module with a used part I think and then take it from there. It’s a very confusing system to work on as the dtc don’t actually help much other than identifying the wheel. Great work.
Thank you very much for help
Great job and great video man !
Thanks for watching
Thank you very much for your vidéo it's help me à lot for my passat
thanks for watching and feedback.
im glad it helped you.
@@PSICompanyPerformance hello sir I HV issue with q3 2018 right hand drive in India..DTC c200d12 .left parking brake motor voltage supply short to B+
C10E129 Par king brake motors .implausible signal
Both are active
Pls reply
@@adnabandasha3201 thanks for watching.
That is the same issue i had in the car in this video.
In this case it can be the transistor or the double relay you need to test those..
Good luck
@@PSICompanyPerformance hopes it does solve thks sir .
@@PSICompanyPerformance sir can I get ur mail I'd or wattsup ...
I checked 4 mosfets. Seems they are fine. Both relays also click. My error code are lost communication between pbm and bcm; pbm and cem; red park brake warning light flashes all the time. What parts on the circuit should I check? Resistance between signal wires is 61.8 ohms. Seems can bus wires are ok. Appreciate any suggestions. Thank you
Thanks for watching.
In order to help you i would have to have a pbm in my hand now...but i dont , so i cant really tell you where to look regarding that dtc...i will as soon as i get a car with a similar issue i will try to dissect the entire board to help people in many other errors than the ones i get.
Good luck
Olá PSI, precisaria da sua ajuda com um problema similar num A5, e teria todo o prazer em levar a viatura à sua oficina. Haveria forma de entrar em contacto consigo directamente? Obrigado
Question: I must change the EPB module on a 2010 Audi A6 Avant and, considering the age of the vehicle, want to avoid paying the 900 euros that Audi are asking me to fit a new one. Buying a second-hand EPB module and fitting it is within my limited mechanical skills. I can also buy the plug. Together, these 2 items are rather inexpensive. But, where/how can I buy the module programming software and how much does it cost please? Thanks.
thanks for watching.
you can buy the cable and software from many places on the internet Ross tech , Vagcom, Vag commander, abrites, etc all of the above will code this module to the car. Make sure you choose a version that is compatible with the cars age.
good luck
@@PSICompanyPerformance Many thanks!
thank you
Hi
By the chance do know where the sunroof control module is located?
Thanks for watching.
The module is j245 and is attached to the sunroof motor itself.
Good luck and hope it helps.
I have a 2014 a8l which has the same panoramic sunroof and they look the same.
Thank you
Could replacing the ECU work too?
Thanks for watching.
Yes it will work but you will need to code the new or used unit to your car ...
But yes it will work.
Good luck
what type of mosfet is that? i need to repair my A4 B8 module...vag shows some DTC but handbrake is functional..thx
Thanks for watching...
I show in the video both the original and the replacement transistor refences...
I bought the replacement from Mauser.com.
Good luck.
Well Lad, how I can contact with you?
What was the code sir ...parts availability link pls
Thanks for watching.
The parts are described in the video and i got them on Robert Mauser site, but you can get them in Farnell site also.
Good luck
Sir pls give part number new part ...in video not able to see clear .
Ok i will see and give to you in writting
You can see it at 5.33m very clearly.
Good luck
@@PSICompanyPerformance iam unable .and video quality not available in settings
@@PSICompanyPerformance thks for reply ...
@@adnabandasha3201 BL1D12
This is awful good.
Fd83444L