Awesome Video - This is what i needed to see to determine if I was going to go with a trailer or van setup and I am going with the van for sure because the length is a hassle. Thanks again for the content and keep at it.
I love your setup brother. I just got a 5×10 enclosed trailer Saturday. Just want to let you know that the NorthStar pump will not work because when your pressure washer stops, the back pressure will blow out the gasket... I tried 3 different ones, don't get one that is for a sprayer... I went with a rv pump from Amazon that is 3 gpm works perfectly.
Slick that’s a nice setup. Almost done with mine which was inspired mostly by Bryce with Suds and go. I’m currently tying to make the same quick connect attachment. What parts did you use for yours?
I think I was the one that told you about that northern tool pump 👊🏾 nice set up homie. I remember when you first showed it. LMD - Laury’sMobileDetailing Dallas, Tx
@@cartailincautodetailing946 North Star NSQ Series 2.2 GPM 70 psi 3/8 in NPT ports. I had the smaller version at first and the fuse kept blowing so I went up to this on and I haven’t had any problems out of this one. It’s a on demand pump. It only comes on when you pull the pressure washer trigger.
@@thewesterngent I run mines from the battery of my van but check your generator also most generators come with the a lot to attach those wires to it. The pump won’t run a lot it’s only going to turn on when it primes when you first turn it on and when you pulling the trigger on your PW gun. I’ve seen people get a whole new battery for that pump but to be honest you’re only using it for what maybe 15-20 min if that on each vehicle.
Nice set up. I know it’s been a year later but I hope you stepped up your game a little bit. Why no CarPro products or Koch Chemie? I don’t wanna hear that they are expensive because in reality they’re not very expensive because they are highly dilutable.
Hey man! I’m currently detailing out here in San Antonio Texas and I really like your license place logo on the trailer! Would you give me permission to have something similar rendered up and applied on my trailer and shirts? I was going to go with the basic font + my info but your style is really a head turner! If not I understand
That’s an amazing set up. Good for him. Wish him nothing but the best.
Awesome Video - This is what i needed to see to determine if I was going to go with a trailer or van setup and I am going with the van for sure because the length is a hassle. Thanks again for the content and keep at it.
sharp trailer
Thank you 🙏🏼
I just bought a 6x10 2 weeks and am trying to figure out how to get it setup. This is nice!
Clean set up, badass truck as well.
Thank you
I love your setup brother. I just got a 5×10 enclosed trailer Saturday. Just want to let you know that the NorthStar pump will not work because when your pressure washer stops, the back pressure will blow out the gasket... I tried 3 different ones, don't get one that is for a sprayer... I went with a rv pump from Amazon that is 3 gpm works perfectly.
Sweet setup man.
Thank you
Love this stuff!
brother-bonjournice to meet you- total nice editing- 🎥
What is the northern tool pump you’re talking about ? Link? Thanks
Slick that’s a nice setup. Almost done with mine which was inspired mostly by Bryce with Suds and go. I’m currently tying to make the same quick connect attachment. What parts did you use for yours?
Can you share what you used to make the holders for the gun and foam cannon?
Yes sir Dm me on Instagram
I think I was the one that told you about that northern tool pump 👊🏾 nice set up homie. I remember when you first showed it.
LMD - Laury’sMobileDetailing Dallas, Tx
What pump is it
@@cartailincautodetailing946 North Star NSQ Series 2.2 GPM 70 psi 3/8 in NPT ports. I had the smaller version at first and the fuse kept blowing so I went up to this on and I haven’t had any problems out of this one. It’s a on demand pump. It only comes on when you pull the pressure washer trigger.
@@alaury13 yes sir thanks again. So would I tap into the trailer wiring to run it or no?
@@thewesterngent I run mines from the battery of my van but check your generator also most generators come with the a lot to attach those wires to it. The pump won’t run a lot it’s only going to turn on when it primes when you first turn it on and when you pulling the trigger on your PW gun. I’ve seen people get a whole new battery for that pump but to be honest you’re only using it for what maybe 15-20 min if that on each vehicle.
Nice set up. I know it’s been a year later but I hope you stepped up your game a little bit. Why no CarPro products or Koch Chemie? I don’t wanna hear that they are expensive because in reality they’re not very expensive because they are highly dilutable.
Hey man! I’m currently detailing out here in San Antonio Texas and I really like your license place logo on the trailer! Would you give me permission to have something similar rendered up and applied on my trailer and shirts? I was going to go with the basic font + my info but your style is really a head turner! If not I understand
I’m thinking gas alone hauling that trailer is a new van payment.
Hi Gary why would u used dura shine product on tires and exterior. Plz visit dura coating in Google seach you will find it very useful 👍 😀 😊