@@keysplease3519 it was supposed to say orgasm not organ haha I’m gunna have to get my sausage fingers on a diet x stay blessed you beautiful man much love Jase x
Very good re-creation and video is good also, actually deserves way more likes and views, while much worse videos get lots of likes etc, I really hate YT algorhytm.
@@keysplease3519 Hey thanks very much! You are already very good at sound design just you will need some luck and patience with unfair YT. Keep up your good work! Cheers!:)
I'm not sure copyright would allow me to sell them. I'm not even convinced I got them exactly right. I do plan to do a 'how to' video showing sound design and then breaking down each part so you can recreate it yourself.
I’m listening to this for the tenth time... where else can I put a like... But the ring is on my right hand..."squinting my right eye" but why? ) Извиняюсь за свой английский...
OK, here goes. Difficult to give exact settings (I will eventually do a video showing all the settings). The U-NO-LX is not free but The TAL U-NO-62 is still (as at Dec 2023) free, it's now in the 'depricated' area (tal-software.com/products/tal-u-no-62). TAL Reverb 4 still appears to be free too. All three parts are TAL U-NO-62. Settings (roughly) as below. If I've not mentioned a setting, then it's zero or 'off'. The Lead Intro synth (High part) is TAL U-NO-62: Chorus I & II, LFO Rate 55%, Pulse wave with PWM at about 25%, PWM on and set to Env, LFO amount 50%, HPF 5%, Cutoff 100% wide open, Resonance 0%, Envelope follow 0%, VCA Env (not gate), Attack 0%, Decay 100%, Sustain 0%, Release 0%. Then loads of Shattered Glass SGA1566 Saturation to give bite. The Lead Intro synth (Low part) is TAL U-NO-62: Chorus II, Pulse wave with PWM at about 50% (PWM off), HPF at 30%, Cutoff 3%, Resonance 10%, Envelope follow 95%, VCA Env (not gate), Attack 10%, Decay, 48%, Sustain 0%, Release 20%. Then there's plenty of SGA1566 Shattered Glass Saturation on it to give it an edge. The 'burble' synth at around 38s is TAL U-NO-62: Chorus II, Pulse wave with PWM at around 10% (PWM off), Sub oscillator at 100%, HPF 20%, Cutoff 25%, Resonance 55%, Env 55%, VCA gate (not ENV), Attack 5%, Decay 45%, Sustain 0%, Release 40%. Then there's a really tight (40ms) slapback delay on it. To get the modulated filter I just recorded me opening and closing the filter and then automated it. You could just as easily add an LFO in Reaper and modulate the filter Cutoff with that instead. Hope that gets you in the ballpark - good luck!
Great job! BUT who else here is asking themselves - "Where the hell did 40 years go? "
Thanks! But surely the 80s was only 20 years ago, right? Right?
The best forty years of my life
44 years ago...
Insane!!!
Well done! Great video editing too! I remember when Upstairs at Erics was released in '82 almost like it was yesterday.
Thanks! '82 was only about 20 years ago though, right? Right?
Three words..... A-ma-zing!
Wow and more WOW! 👌😁☮
This is INSANE!!!! Sounds just like it! 🔥🔥🔥
Than you very much!
"Situnovation" ;)
Brilliant cover, nice video editing too.
Thanks 😅
bro that sounds like the original. if that was you then you are a genius
It is me - thank you!
Excellent! I enjoyed the show!
Huge talent and great Skills . fantastic rendition.
Thanks!
Brilliant tune Yazoo cant beleive t was a b side of onl yyou
Un effing believable 😳🙀🤯!!! I had to shake my groove thang 🥳🎉
Ha ha! Cheers!
Simply great!!!
Many thanks!
WHAT!!!!! Love it. Please do 'Only You'. I was looking for decent remixes but no one has done one. I think you are the chosen one.
Ooh, good choice. I might have to do that.
Amazing!!
Thanks!!
Excellent 👏👏👏👏
Thank you very much.
Thank you for posting! This is great. I love that you clearly video your playing as I can learn from you. :)
Thanks. I plan to do a more in-depth how-to video showing how to play each part and which instrument(s) and settings to use.
@@keysplease3519It will be fantastic!!! I'd like to know the instruments and presets you used😊
@@josea.cordero8200 Instruments are listed in the description. I'll make a video soon about the sound design.
great!
Moving through the doorway of a nation...
Outstanding mate
Thank you!
Thank you!
Faaaaaakking he'll that was amazing and gave me ears an organ mate subbed straight away
Ha ha - thanks!
@@keysplease3519 it was supposed to say orgasm not organ haha I’m gunna have to get my sausage fingers on a diet x stay blessed you beautiful man much love Jase x
Bravo, well done!
Thank you!
❤AMAZING
Thank you!
Thks so much for this stunning rendition 👏 both sounds and mix are very accurate and so are your playing skills ;)
Thank you very much! Glad you like it.
Absolutely outstanding!.
Thank you very much!
Excellent job ! Great sounds 👍😊
Thank you very much!
Sensacional! Parabéns.
Saudações do Brasil 🇧🇷
Vince Clarke é um gênio.
Thank you. I agree - Vince Clarke is a genius!
Very Nice indeed!
Many thanks!
Very good re-creation and video is good also, actually deserves way more likes and views, while much worse videos get lots of likes etc, I really hate YT algorhytm.
Thanks! I've just checked your (excellent) channel and see I've got a long way to go yet...
@@keysplease3519 Hey thanks very much! You are already very good at sound design just you will need some luck and patience with unfair YT. Keep up your good work! Cheers!:)
Another great recreation,, keep them coming
Thank you! Any suggestions for what to do next?
superb….keep going
Thank you, I will. More being planned...
BRILLIANT!!!
Thanks!
Super cool.
Nice performance. 👍💕
Superb job man. As a keys man myself I appreciate a job well done 👏👏
Thanks!
Phenomenal performance. Can't wait for more. Perhaps try Axel F or Domino Dancing if you haven't done those already.
Haven't done either (yet). Good suggestions, thanks!
Solo falta la voz de Alison Moyet, y listo. Me encanta, te has ganado un like.
Gracias!
Sweet
Sweet, nice job
Perfeito!Belo trabalho.
I love it 😮😮
nice job !! do you have tab on this please ?
Superb. any chance you might sell the midi performance file/files??
I'm not sure copyright would allow me to sell them. I'm not even convinced I got them exactly right. I do plan to do a 'how to' video showing sound design and then breaking down each part so you can recreate it yourself.
Excellent!
Can you overlay Alison singing please?
I’m listening to this for the tenth time... where else can I put a like... But the ring is on my right hand..."squinting my right eye" but why? ) Извиняюсь за свой английский...
Using Pro-tools analog mixer.
Standard Reaper theme and an X-touch control surface (with extender).
@@keysplease3519 I have Reaper analog mixer with Wave plug-ins.Reaper is like Pro-tools.
can you tell us what type of patch was used for the intro lead, and at around 38 sec? those TAL's are no longer free. thanks
OK, here goes. Difficult to give exact settings (I will eventually do a video showing all the settings). The U-NO-LX is not free but The TAL U-NO-62 is still (as at Dec 2023) free, it's now in the 'depricated' area (tal-software.com/products/tal-u-no-62). TAL Reverb 4 still appears to be free too.
All three parts are TAL U-NO-62. Settings (roughly) as below. If I've not mentioned a setting, then it's zero or 'off'.
The Lead Intro synth (High part) is TAL U-NO-62:
Chorus I & II, LFO Rate 55%, Pulse wave with PWM at about 25%, PWM on and set to Env, LFO amount 50%, HPF 5%, Cutoff 100% wide open, Resonance 0%, Envelope follow 0%, VCA Env (not gate), Attack 0%, Decay 100%, Sustain 0%, Release 0%. Then loads of Shattered Glass SGA1566 Saturation to give bite.
The Lead Intro synth (Low part) is TAL U-NO-62:
Chorus II, Pulse wave with PWM at about 50% (PWM off), HPF at 30%, Cutoff 3%, Resonance 10%, Envelope follow 95%, VCA Env (not gate), Attack 10%, Decay, 48%, Sustain 0%, Release 20%. Then there's plenty of SGA1566 Shattered Glass Saturation on it to give it an edge.
The 'burble' synth at around 38s is TAL U-NO-62:
Chorus II, Pulse wave with PWM at around 10% (PWM off), Sub oscillator at 100%, HPF 20%, Cutoff 25%, Resonance 55%, Env 55%, VCA gate (not ENV), Attack 5%, Decay 45%, Sustain 0%, Release 40%. Then there's a really tight (40ms) slapback delay on it. To get the modulated filter I just recorded me opening and closing the filter and then automated it. You could just as easily add an LFO in Reaper and modulate the filter Cutoff with that instead.
Hope that gets you in the ballpark - good luck!
thanks, I have the TAL 101, so I will try to get close!
@@keysplease3519
😮😮😮😮
ощущение что основную партию воспроизвели задом наперёд... или мне кажется...
I think I haven't quite got the delay correct and it sounds like a reverse reverb.
@@keysplease3519 And now I understand)
Sounds the same.
I'd say substantially better...
Thanks so much, but I wouldn't go that far!
playback....
Are you blind or stupid?