Quick Tip: when assembling the frame to the body: use two of the protective foams from the package, one to raise the body and the other to rest the frame on the side, so nothing gets scratched or broken :)
Thank you, this video helped me assemble my new printer 😅 it was pretty scary since it’s my first one ever! So it was nice to have a video help me along and make sure I was plugging in all the right things
I look forward to these printers. But this music for the video doesn't work at all 😵 too restless. But mega cool printer and soon it will arrive at my place! 🤩 Happy printing smelt folks!
Hi, a cable for Z endstop is preserved in case customer want to go old-school. (No Z endstop sensor comes with the machine, customer can install any kind of sensor in case they wanted to.)
I literaly spent hours of leveling that printer... First of all I got an outdatet handbook (without that start gcode). Then my BLTouch was damaged, I got a new one. But the handbook has the wrong order for leveling? You just did the z=0 before the autoleveling - in the handbook it's a completly different order. Also my bed is maybe defect because I have to print 1st layer with 220 and 70 degrees celcius otherwise the print doesn't hold. I have so many problems with that printer... :(
I just got in the mail. It was missing the two chrome bars ;(. My question is about the calibration for when I get there. If we put a pad on top to help break the molds, should we calibrate the machine with that on top instead of the piece of paper?
Question to everyone. My printer Will not stop pressing down and make a loud buzzing sound when I try to level the bed. The probe doesn’t even come out. The extruder will just push down and it’s a scary thing for me. I am new to 3D printing so can anyone please help me
next time show more upward, so easier to figure out how the fuck you put all back in box with these 6 different shaoed removeable cushions, random cardboard piece etc..
Quick Tip: when assembling the frame to the body: use two of the protective foams from the package, one to raise the body and the other to rest the frame on the side, so nothing gets scratched or broken :)
lol did this too
Thank you, this video helped me assemble my new printer 😅 it was pretty scary since it’s my first one ever! So it was nice to have a video help me along and make sure I was plugging in all the right things
Thank you for your support, we will try to do the best.
very smart to have the usb ports facing up. Do they accepts all sorts of filament particles?
never been an issue for me but you can print a cover if your really bothered by it…
Materialverträglichkeit: PLA, PETG, TPU laut Manual
I look forward to these printers. But this music for the video doesn't work at all 😵 too restless. But mega cool printer and soon it will arrive at my place! 🤩 Happy printing smelt folks!
Very nice and quick installation 👍
what was the one connector for at the bottom right?
Hi, a cable for Z endstop is preserved in case customer want to go old-school. (No Z endstop sensor comes with the machine, customer can install any kind of sensor in case they wanted to.)
I literaly spent hours of leveling that printer... First of all I got an outdatet handbook (without that start gcode). Then my BLTouch was damaged, I got a new one. But the handbook has the wrong order for leveling? You just did the z=0 before the autoleveling - in the handbook it's a completly different order. Also my bed is maybe defect because I have to print 1st layer with 220 and 70 degrees celcius otherwise the print doesn't hold. I have so many problems with that printer... :(
I just got in the mail. It was missing the two chrome bars ;(. My question is about the calibration for when I get there. If we put a pad on top to help break the molds, should we calibrate the machine with that on top instead of the piece of paper?
Hello, friend, the new spool holder doesn't have a chrome bar now.
Please also check "Artillery 3D Printer Leveling Tutorial", it have more details.
@@Artillery3D Why did I see some people torque the bottom? Is this why the bed moved so easily after unboxing?😎
Where is the other video referenced on the instructions please? I have the version that has no metal tubes for the spool holder
Hey did you ever find that video I have the same version as you and I can't find it
I ordered it today and I'm really looking forward to it. Greetings from Germany ;)
mine does not have the arrows to adjust the Z axis
Mine did not come with the mettle brace for the rollers. It came with bearings installed. Was that a new update?
Hello, friend, yes.
@@Artillery3D so the part at 4:09 is different assembly correct?
Is this a production unit?
Amazing video, thank you so much
Question to everyone. My printer Will not stop pressing down and make a loud buzzing sound when I try to level the bed. The probe doesn’t even come out. The extruder will just push down and it’s a scary thing for me. I am new to 3D printing so can anyone please help me
i had the same problem after the assembly. Remove the plug from the bltouch sensor hidden by the plastic and reconnect it. It worked for me
@@brunoxxx1230 forget it, it was just an incorrect reading on the main cable connecter the one where the frame connects to the base
Look in the description because the printer is not suited for ABS Prints depending to the manual:
Materialverträglichkeit: PLA, PETG, TPU
Isn't it just because you need an all metal aftermarket part?
So cool
Awesome!
Excelent...
The Auto Level Sensor is CRAP by mine X2
Turn off the music FFS
next time show more upward, so easier to figure out how the fuck you put all back in box with these 6 different shaoed removeable cushions, random cardboard piece etc..
Came here because the printed instructions are not good, and this video was not helpful at all.