Testing our ACTIVE 2.3 Prototype!
Вставка
- Опубліковано 4 лип 2024
- Let's test the 2.3's PSI, GPM, Voltage and Amperage!
These are the results when we tested our 2.3 prototype. As product development advances, we will be creating a new video to show you the upgrades we've implemented on its performance.
We've talked a lot about how we're aiming for this bad boy to have a constant 2.3 GPM, but as they say, "I'll believe it when I see it." Let us know what you think so far!
Don't forget to click like and subscribe. Follow us in this journey. If you have any questions of how we design our products or which products we have designed let us know in the comment section below.
Follow us on our social media channels!
IG and FB: @activeproducts.inc
Linkedin: Active Products Inc. - Авто та транспорт
Once my 2.0 takes a 💩, I’ll be upgrading to this one! 😉
The thumbnail version looks absolutely fantastic!
Thank you Active for these tests and charts. Very easy to comprehend. Great numbers!
YESS LETS GO, I've been eyeing the Kranzle so hope this can delay the inevitable lmaooo
love my active 2.0 and cant wait for this
Can’t wait!
Looks awesome! I love my 2.0, but I might have to upgrade when available!
I need to upgrade and waiting for this to release, cant wait.
love my 2.0, it has taken my weekend washes to the next level. this 2.3 looks great too, props for putting out this type of test video. I really appreciate active's drive to continue to innovate and grow. excited for the new foam cannon as well. cheers guys!
How much of a difference does a 1.2 vs 2.0 gpm make when washing/rinsing? how noticeable is it?
yes very noticeable, especially washing off the soap after a pre foam or contact wash. also more water flow will make your foam cannons perform better and lay down some thick foam @@whitegoodman7465
May I ask how long you have been using the 2.0? Looking at 2.0 or 2.3 soon
Very impressive! 😮
I like it. I'm impressed
I know you talked about it in the past, but the sound is pretty awesome. Aside from getting more flow, the sound of the machine is also a huge benefit.
The ‘tone’ of the motor is different - more like a hum as opposed to a whine - but ultimately the sound level is quite comparable.
Looking good in the thumbnail
Let's go!!!
Any chance yall will have a portable version on wheels w/ a hose reel like the Kranzle K1122TST?
Solid numbers! Having owned multiple Active PW, I am really looking forward to giving this a try.
Which have you owned? Just curious!
@ACTIVEPRODUCTS Howdy!! Over the past years, I have owned the Cat 1800, the original VE52 and currently running 2.0. I gave my Cat 1800 to a close friend. They still love it. Bought the 2.0 because I thought my VE died but it didn't. Lol
Great testing, great data, straight to the point. Is there any sound data available comparing the 2.3 vs 2.0? I have a 2.0, and it's great, but wish it was quiter living in a town home with 1 neighbor. Any data available?
We will certainly make the data available when production versions are ready. However, I will caution that the sound levels are similar - it’s the type of sound that’s different. This is a lower hum vs the 2.0 which is a higher pitched whine. So many will find it “sounds” quieter. Both are our patented pump designs so they all tend to run smoother and quieter than comparable units.
Awesome for you to share this information! So it should be safe to use the 4.0 nozzle on a dedicated 20A circuit then? Also still thinking there should be a 240v product at some point.... especially since I have several 240v outlets at my house (14-50) lol.
Have you been looking at our product roadmaps? 😉
Let's go Let's gooooo
Just wondering if the 4.0 orifice will be the best option if I have a 20 AMP circuit?
How about the amp draw with a foam cannon with a 1.25 oriface
Patiently waiting.......Love my 2.0 but.........
I purchased two of your Pressure Washer, 2.0 love those pressure washers best thing ever I can trust these special washers. If not damaging my customers paint that one looks like a big motor has a lot of power. Looks like it will damage my customers paint.👍🏼👍🏼👍🏼
Actually, it won’t. I would say the emphasis is on more flow and more pressure, but driving more flow is more important (or impactful you could say) than max pressure and less water. Regardless, at these pressures and using the right spray pattern there should be no risk to paint.
Could we have an update on the release date eta?
I am ready to upgrade!
Let us know how you like it when you do!
Nice! Please try a dual setup with 2 pressure washers working in tandem. I would like to see if it works. 4+ gpm with 1100psi would be awesome.
Certainly we will have this content coming soon!
Why? lol you are free to do whatever you like but that is just dumb.
I just want to know the expected price point if its too high ill buy a 2.0 right now
Maybe around 500/600
Awesome! 700-800psi is more than enough for my washing needs......
Yes it is. To get to a pressure level needed to make a significant difference, you need to go to gas PW or a dedicated high amperage circuit. Otherwise, for household electric units, flow is more important.
How loud is it?
Will you be able to remove the unit from the frame to put on a shelf?
Absolutely. That’s part of the design. When we saw how many people were making the 2.0 a permenant part of their set up, we wanted to make it easier for consumers.
Will these be able to run in parallel like obsessed garage has done with some pressure washers
You plan on self diagnosing yourself with ocd too?
Is there a ballpark or target MSRP available? I am shopping the 2.0 but want to see a price on the 2.3 to see if I should wait until spring! Thanks.
Price is on the website. retails at 649.99 USD
Thanks!
❤ just thinking with this machine you will probably need a 1.5 millimeter opening for the foam Cannon and not a 1.25 as that is equivalent to approximately of 3.5 which would probably be closer to 18 amp draw
We can’t stop people from customizing their set ups to achieve their ideal foam and operating parameters. However, we are trying to educate people that there are limits to what can be done based on things like motor specs and power draw. Stay tuned for more.
I was hoping for a bit more gpm at 1100psi...i know the real push here is for a longer lasting machine...but due to the better motor its less effected by nozzel size...darn you better motor..
Yes, there are some technical considerations that we will go into detail on. I think giving people more information will lead to a better understanding of what’s possible and helps people to manage their expectations.
Love being along for the journey from concept to product launch..Thanks for taking the extra time and steps to do it..@@ACTIVEPRODUCTS
im using a 3.0 nozzle and on a 15 amp outlet and its not tripping, any idea why?
It's hard to say, that should be drawing more than 15A. Still, we wouldn't recommend using a 3.0 nozzle. Drawing too much current can cause damage to the microswitch and capacitator.
Seriously interested as my 16 month AR Blue 630TSS just leaked oil all over my garage and AR said, "Oh, I'm sorry, you're out of warranty, let me send you links where you can pay someone to fix it." I just built my whole garage around this pressure washer, hopefully the Active 2.3 will easily take its place this spring. Anyone want to buy a slightly used AR-630TSS?
Can’t wait to upgrade since my ve56 is hanging by a thread 😅
Well - we certainly hope you got some good use out of it!
@@ACTIVEPRODUCTS I sure did! About 3 years worth of weekly washes.
What is the 2.3 life span ?
Hey guys I wanted more info on upcoming release of Active 2.3 P/W and I found a website saying 649.00 but out of stock. Was this your site? URL says Active...
Hi there, that's the correct price! It'll say out of stock until we launch in Spring, but you can sign up and get notified for pre-orders and launch.
@ACTIVEPRODUCTS yes thx I did. At least I know upcoming price. Question please which nozzles size are we going with 4.5 I hope since I'm ordering aqualine ahead of time.
I don’t know if anybody asked this question yet… Can the motor and start button be turned around to be facing the right side ?
Unfortunately not. We had to make a decision either way!
@@ACTIVEPRODUCTS understandable and thank you very much for replying. I have a spot for it & Can’t wait for pre-orders. Great work on the new design 2.3 👏
It states 2.3gpm at 1100 psi😢
How much does it weigh?
Our prototype is 45 lbs with the frame, and 29 lbs without it. We'll be updating these numbers with the next samples!
Wow, this looks awesome. As someone who has yet to pull the trigger on a pressure washer and whose wife refuses to let them spend $1000+ on one, this may be my ticket! Lmao!
Well, you (and your wife hopefully) will be happy to know that the Active 2.3 will cost $649.99 USD!
I think anticipation is gonna be 🤪
This is definitely going to be my pressure washer, especially if I don't need to run a dedicated 20A circuit for it.@@ACTIVEPRODUCTS
But when will you take my money!
That frame has ZERO cool factor. Needs a redesign asap on the frame. Awesome job on the pump
Cool or not, it’s at least functional! It’s very heavy to lift so it works well from that perspective!
Cool factor?
Wow these numbers look amazing, can't wait to get one LOL. Love my 2.0 but I think I'll have to upgrade regardless.
I think the 2.3 will only appeal to a certain segment. But the 2.0 is a great choice too.
How much for that 2.0