I have a similar machine. Without a load spreader, there is pressure on both the top and bottom of the racket and it caused damage to the painting and likely to the racket as well.
At the last weave, where I would start to tie off, I am unable to clamp the strings because the clamp gets in contact with the holding plate. What can I do? This makes the top string pretty loose compared to the other strings.
It looks like a very basic machine. I'm not keen on the drop weight system. I've used the Exthree two point machine and now use Exthree six point machine. Much better. I've yet to try an electronic stringing machine. I must admit, I prefer floating clamps to fixed.
I don't have this machine but I do have a old ektelon machine which is a 2 points machine. And I have string 27x29 and the racket held. Could it be you did something wrong. At first I was very scare too. But after doing it many Times I have full trust now. Maybe this machine is really dangerous but I haven't read reviews where this machine is dangerous.
I have a similar machine. Without a load spreader, there is pressure on both the top and bottom of the racket and it caused damage to the painting and likely to the racket as well.
Thanks for sharing!
you've got nice skillz!
24 lbs main and 26.5 lbs cross most stringers will increase the cross tension by a lottle bit.
Great video, you are very good
At the last weave, where I would start to tie off, I am unable to clamp the strings because the clamp gets in contact with the holding plate. What can I do? This makes the top string pretty loose compared to the other strings.
where available this machine&what price please
Great video.
Just one question,
Is this machine worth it ? I mean, if I string my racquets at about 29x31, will this break my racquet ?
How high would you go on the Klippermate? I string my rackets 62lbs but max at 65lbs.
Why the hell would you string it that tight?
Those are tennis racquet numbers but even then thats usually over the racquet specs as most tennis racquets the max recommended tension is 60lbs
Do you have anymore videos? What is your name?
it is not safe to string high tension on the klippermate. you need a machine with 6 point support.
BadmintonCentralTV how high can it go? Is 27lbs okay?
BadmintonCentralTV I have actually strung more than 25 rackets on string tension of 30*33 and had no issues what so ever.
@@anshkhanna1146 microcracks will eventually break the racket
Does this machine break or crack string when you tie it to drop weight?
how to get the starting pin?
+Kang Qihao make your own. its simple. get a key ring and then get some extra string you have lying around. Tie it
It looks like a very basic machine.
I'm not keen on the drop weight system.
I've used the Exthree two point machine and now use Exthree six point machine.
Much better.
I've yet to try an electronic stringing machine.
I must admit, I prefer floating clamps to fixed.
NICE
I broke at least three rackets with this machine. anything above 26 is very dangerous.
I don't have this machine but I do have a old ektelon machine which is a 2 points machine. And I have string 27x29 and the racket held. Could it be you did something wrong. At first I was very scare too. But after doing it many Times I have full trust now. Maybe this machine is really dangerous but I haven't read reviews where this machine is dangerous.
Pretty painful....
Rubbish