I think the fairlane has another tenth just with a clean launch, it sounds so damn good though, the dose and the exhaust note, sooo dialed! Love the track content
Quick tip champions, dont pump the trottle during the burnout. Hold it constant warm the tyre roll forward. Dont roll out past the beams reverse etc etc. Keep the heat in the tyres
Well done guys , the Ford is a solid car , my mate is building a au ute 6 cylinder turbo ,I suggested he watch your vids on how you built yours ,hopefully you guys can compete one day
Raise the rear of the ute with stiffer shocks and get th cv angle better , I'd also check it on a 4 poster to see what your pinion angle is. Factory isnt always perfect and yes it has the uni but you may want to shim the mounts of diff or the trans. Take it to a good suspension specialist if not wanting to play too much by yourself.
Congrats on the PB Cammo, looking forward to seeing quicker times. The Zestino radial's are definitely doing their job... running quick numbers & destroying diffs 🤣🤣🤣🤣
Why did you guys take on the fair lanes factory down force windscreen spoiler … you definitely would’ve got better times with it on haha!! Cheers mouse
Hey Mate to be honest looks so much better then with the Siemens on it. Stickies loook way better. Siemens are everywhere these days maybe get different wheels for it 😂😂
A really old school phone that got you mad poontang while rolling in your 5.0. I honestly think he means the "genuine" rebranded lensos with fake rivets though. Apologies if they're actual three piece and not Ozzy tyres.
Pro tip for young players, you don't need to buy V8 Axle shafts, Vsick ones do the same job and are a quarter of the price 👌 one of my mates had a VY SS years ago who used to like doing a lot of 6000 RPM clutch drops and used to change axle shafts every month 😂😂😂
Probably broke a stub axle in the diff its self repco shafts are pretty good quality also and castlemain rod shop does a bolt in 9” conversion for them 😂😂
Well done with the Fairlane! Amazing times!! Between runs, keep your bonnet open to dissapate heat, makes a big difference.
11.3.
I think the fairlane has another tenth just with a clean launch, it sounds so damn good though, the dose and the exhaust note, sooo dialed! Love the track content
The land yacht ëleven"the "three" line clean. Has soooo much more in it. Well done Camo....
11.3 is a great time considering the traction issues. Good luck getting into the tens!
Well done and congratulations to both sides
Hell yeah boys! Up the fairlane! Well done ,nice work.
Bloody stoked for the boys!!!
11.3 that's awesome 👌 man I love that Fairlane. Congratulations 🎊
Nice work Nath!
Nathan beaming with that smile awesome stuff
I'm giving this a thumbs up even before I've watched it. That Thumbnail is *Chef's Kiss* outstanding. Made me laugh.
Quick tip champions, dont pump the trottle during the burnout. Hold it constant warm the tyre roll forward. Dont roll out past the beams reverse etc etc. Keep the heat in the tyres
Well done guys , the Ford is a solid car , my mate is building a au ute 6 cylinder turbo ,I suggested he watch your vids on how you built yours ,hopefully you guys can compete one day
Huge congratulations on the 11.3 kicking goals!!!
Congratulations on the 11.3 guys! 10’s in no time hey!
11.3 Boyz!!! That's awesome 😎
Great work boys.
This channel always delivers.
The fairlane sounds tuff
Raise the rear of the ute with stiffer shocks and get th cv angle better , I'd also check it on a 4 poster to see what your pinion angle is. Factory isnt always perfect and yes it has the uni but you may want to shim the mounts of diff or the trans.
Take it to a good suspension specialist if not wanting to play too much by yourself.
G'day guys.
WOW that last run in the Fairlane looked awesome congrats .🎉
Eleven three.
11.3
So thanks for sharing ✌️ Peace from Melbourne 3810.
Congrats on the PB Cammo, looking forward to seeing quicker times.
The Zestino radial's are definitely doing their job... running quick numbers & destroying diffs 🤣🤣🤣🤣
What a beast! Well done guys. Better track prep at Heathcote, you'll go a 10 straight away
Well done guys.
11:3 yeah buddy. Week on the skids mate 😂
Good on you boys and keep up with the contents
11.3’s baby!!! Congratulations
Are you taking the Fairlane to Drag Challenge this year?
Raced at Calder and heathcote. Calder was the better track now heathcote is better. Use more track prep spray Calder!!!! We are all noticing.
Nothing to do with using more traction compound, the track temp was only 10 degrees!
Love the fairlane
good driving there dan
11.3 well done boys. 10,s next give it to her 👍😎
Top job 😎
Nice driving
Well done killing it
You guys need to get a Holden 5L and do the same as what you did to the VY. Might be a bit slower but it will sound heaps good
impressive gentlemen..Fairlane is awesome
Congrats an excellent work.
Eleven Three.
Cracking effort lads, the Fastlane will be in the 10's in no time.
Also how did the VL go?
11.3, well done boys! :D
Raise the rear ride height on the ute and use some slicks, that will help the stock rear end parts last longer and also don't use 5th gear.
Turn up the boost and launch equals pushing ute.......kinda sounds familiar 🤔 😉
fairlane back to the shop to be pulled apart again
The Fairlane is awesome with a clean start its a 10 sec car
Nice work Fellas. ( I am from the US , Fellas is the same as Mate.) That was a good episode.
Why did you guys take on the fair lanes factory down force windscreen spoiler … you definitely would’ve got better times with it on haha!!
Cheers mouse
Are you still running the btr and is it holdinb up
11.3 is quick!
11.3 - congrats. And an excuse to put a huge diff in the yute
Hey Mate to be honest looks so much better then with the Siemens on it. Stickies loook way better. Siemens are everywhere these days maybe get different wheels for it 😂😂
A really old school phone that got you mad poontang while rolling in your 5.0.
I honestly think he means the "genuine" rebranded lensos with fake rivets though.
Apologies if they're actual three piece and not Ozzy tyres.
Micheal I think it’s time to build the Gemini to go against these boys 😉
Nek minnut we’re goin for 10s 😂😂
Stock suspension, Slicks and front runners for the ute! Will piss in a low 10sec pass imo. Ls forEVER HAHA 🤪
Well done boys. What psi do you launch at and what is your 60ft time?
Pro tip for young players, you don't need to buy V8 Axle shafts, Vsick ones do the same job and are a quarter of the price 👌 one of my mates had a VY SS years ago who used to like doing a lot of 6000 RPM clutch drops and used to change axle shafts every month 😂😂😂
Great outcome for the failane
But are you ready? Ready for 10’s 😂
Axel or cv? Should have raised the rear for the drags its the crap angles the kill cvs
Smiles for miles.
Bugga for cv shaft/diff.
Was nath short shifting a bit?
Probably broke a stub axle in the diff its self repco shafts are pretty good quality also and castlemain rod shop does a bolt in 9” conversion for them 😂😂
🍺👏👍🏻
11.3 fucking oath boys
Boys what’s been done to this latest BTR? Converter size? Etc
I'd like to hear about this as well. Vid coming?
Eleven three
I don't know why he was using a handbrake in a manual and the ford is floating in the back eand