Hey I have a couple of questions I'm worried about. I want this exact exhaust system and sound on my Mercury Marauder but when I went to go ask for a price they said it would run me more then 4 grand. I'm thinking they are not correct. About how much should it cost me to get this done to my Marauder in the Dallas Tx area?
It's louder than stock, our Turbo-Chambered mufflers on the Marauder give it a good tone, but keeps it respectable. If you wanted it loud enough to scare old people and make children cry, you could always go with our S-Tube mufflers. ;)
Yes, you can check the link in the vid description, we have a variety of options available. We'd recommend a tune to rectify any check engine lights that may arise and to keep it from running too rich, but our high-flow cats should be fine for inspection.
Vaffanculo313 Because it's a performance system, it may throw a code (because it will be running a little richer than stock), but getting a quick tune should dial it all back in and turn the check engine light back off.
Depending on the options you go with, to purchase full headers & exhaust for the Marauder direct from us will run you between $1,980 to 2,180 (plus shipping), the rest depends on how much a shop is going to charge you for installation, etc. Feel free to give us a call and we can answer any questions or give some more options concerning dealers, shops and installation - 800.878.3635
+Obryan Jenkins Hmm, you mentioned PI heads in another comment, those would be the tricky part because we haven't designed our Crown Vic systems with that flange. We do offer build-kits, but it would require you or a shop fabricating from our components. Let us know if you have any further questions - 800.878.3635
For Crown Vic headers the steering shaft, starter and dipstick would be the main removals. We've got install instructions for most products that list each step. Check the link in the description and click on any product on our site to view & download the instructions. Or feel free to call us at 800.878.3635
We've got a couple options down by North Carolina, if you want to give us a quick call we can run through them for you (ask for Chris, he knows NC well) - 800.878.3635
Visit the link in the video description above, or view our dealer search on our website (also listed in the description) - or call us toll-free 800.878.3635
Damn :/ alright,I was looking to get some for my 04 marauder and this sounded super nice not too aggressive but still louder than stock. Do you have any headers I could use for street use?
Basically a P71 Interceptor with the 4 valve engine, much more sound deadening and a much nicer interior. Which does make it quite a bit different than a standard CV or GM.
You can check out the dealer search on our website (listed in the vid description) or feel free to call us and we can can give you some recommendations 800.878.3635
With just our headers and cats alone most drivers are seeing 23-30+ HP. You can give us a call to chat 800.878.3635, or even check out some third party dyno vids on youtube: ua-cam.com/video/hydkXJiWTeE/v-deo.html ua-cam.com/video/EX1nY2LJRFw/v-deo.html
Damn I loved driving this car!!!
Hey I have a couple of questions I'm worried about. I want this exact exhaust system and sound on my Mercury Marauder but when I went to go ask for a price they said it would run me more then 4 grand. I'm thinking they are not correct. About how much should it cost me to get this done to my Marauder in the Dallas Tx area?
Found one little typo~ UA-cam doesn't allow replacing video, so it had to be reuploaded! Now you can enjoy it all over again!
Hey can these headers fit on the 32 valve 4.6 of a 1998 LSC Lincoln Mark 8 ?
It's louder than stock, our Turbo-Chambered mufflers on the Marauder give it a good tone, but keeps it respectable. If you wanted it loud enough to scare old people and make children cry, you could always go with our S-Tube mufflers. ;)
These tips have a 3.5" body, 26" length with 2.5" ID inlets
how much hp does this step up help gain
stainless works has a video of an 03 crown vic with the same set up, look it up its on this channel it sounds almost identical
What is all done to the marauder in this video besides ur full exhaust set up?
I'm in Pennsylvania ... Would love to find a dealer here and one who could do the install
Can you go back with the stock tips on that exhaust
I have a 2005 Crown Victoria. I want to have the same sound that this Marauder has. What do I need to do?
Sounds GOOD !!!
What o2 delete or simulators are on that Merc...
Sounds great!
Thanks Myk!
Would this fit on a grand marquis headers and all?
Why take the video down just to put it up again?
What's the length & outlet of the tips?
What kind of hp gain is there to be had?
Do the cats come with the long tube headers? And also do would they pass Missouri inspections?
Yes, you can check the link in the vid description, we have a variety of options available. We'd recommend a tune to rectify any check engine lights that may arise and to keep it from running too rich, but our high-flow cats should be fine for inspection.
Awesome! Thank you!
will in pass nys inspection with this set up and ill it trigger any check engine lights ?
Vaffanculo313 Because it's a performance system, it may throw a code (because it will be running a little richer than stock), but getting a quick tune should dial it all back in and turn the check engine light back off.
I did so, and liked :)
Where is bank 2 sensor 2 location on the car?
Mercury boy .
Depending on the options you go with, to purchase full headers & exhaust for the Marauder direct from us will run you between $1,980 to 2,180 (plus shipping), the rest depends on how much a shop is going to charge you for installation, etc. Feel free to give us a call and we can answer any questions or give some more options concerning dealers, shops and installation - 800.878.3635
I have a 2000 crown vic with a 01 engine how would i go about getting the exhaust being the heads changed in 01
+Obryan Jenkins Hmm, you mentioned PI heads in another comment, those would be the tricky part because we haven't designed our Crown Vic systems with that flange. We do offer build-kits, but it would require you or a shop fabricating from our components. Let us know if you have any further questions - 800.878.3635
Would my mechanic have to remove or replace anything while installing long tube headers on a crown victoria 1998?
For Crown Vic headers the steering shaft, starter and dipstick would be the main removals. We've got install instructions for most products that list each step. Check the link in the description and click on any product on our site to view & download the instructions. Or feel free to call us at 800.878.3635
Stainless Works are your headers a good idea for daily driving grand marquis' ?
We've got a couple options down by North Carolina, if you want to give us a quick call we can run through them for you (ask for Chris, he knows NC well) - 800.878.3635
nice
Can you tell me where the nearest dealer that can also install is for me. My zip code is 28117.
where can I get these?
Visit the link in the video description above, or view our dealer search on our website (also listed in the description) - or call us toll-free 800.878.3635
Is it CA carb legal?
Hey Favian, our headers can be used in California on for off-road, unlicensed, race competition vehicles.
Damn :/ alright,I was looking to get some for my 04 marauder and this sounded super nice not too aggressive but still louder than stock. Do you have any headers I could use for street use?
Favian Herrera Unfortunately we don't have a California certified street-legal Marauder header.
People whats the difference between this marauder and grand marquis or crown Victoria? just engine? plz help with this
the difference is the motor ,tranny ,,rear end gears , suspension, interior,,,,,,the list go's on,,,,,,,,,,,,
Basically a P71 Interceptor with the 4 valve engine, much more sound deadening and a much nicer interior. Which does make it quite a bit different than a standard CV or GM.
You can check out the dealer search on our website (listed in the vid description) or feel free to call us and we can can give you some recommendations 800.878.3635
With just our headers and cats alone most drivers are seeing 23-30+ HP. You can give us a call to chat 800.878.3635, or even check out some third party dyno vids on youtube:
ua-cam.com/video/hydkXJiWTeE/v-deo.html
ua-cam.com/video/EX1nY2LJRFw/v-deo.html
Give us a call at 800.878.3635 or contact us through our website (listed in the description)