Це відео не доступне.
Перепрошуємо.

How to make Smart Dustbin with Arduino | Arduino Project

Поділитися
Вставка
  • Опубліковано 11 жов 2018
  • Here we will make a Smart Dustbin by using arduino and ultrasonic sensor.
    I hope you guys enjoy learning this project.
    Arduino Codes: drive.google.com/drive/folder...
    Buy Stuff here:
    Buy Kit Here: www.importdukan.com/smart-dus...
    individual Components used:
    Arduino Uno : buy.flyrobo.in/unosmd
    Ultrasonic Sensor :buy.flyrobo.in/ultrahc
    Servo : buy.flyrobo.in/sg90
    Music by: / ikson

КОМЕНТАРІ • 1,9 тис.

  • @IndianLifeHacker
    @IndianLifeHacker  5 років тому +389

    I hope this video will be helpful for your next science project.
    Arduino Codes: goo.gl/kHx4ZD
    Buy Stuff here:
    Arduino Uno : buy.flyrobo.in/uno
    Ultrasonic Sensor :buy.flyrobo.in/ultrahc
    Servo : buy.flyrobo.in/sg90
    Male - Male Jumper wire : buy.flyrobo.in/m2m
    Male - Female Jumper wire :buy.flyrobo.in/m2f

    • @parvezahmad5863
      @parvezahmad5863 5 років тому +7

      Indian LifeHacker bhai muje ye dustbin banana h ...
      But mje programming smj nhi aya ....
      Circuit to smj gya hu ....
      Ho sake to programing smja dijie

    • @saiyammehta1870
      @saiyammehta1870 5 років тому

      #ThankYou#

    • @arunterrato2525
      @arunterrato2525 5 років тому +4

      Indian LifeHacker bro urgent hai kal school mey dikhana hai lifi ka project yet not completed becoz samz nii aa raha Kon ra Kon sa ground hai or Kon sa left right

    • @nilimagupta8080
      @nilimagupta8080 5 років тому

      Thnk bhia mara sciences competition hona wala ha up ka videos bahut accha lagata ha

    • @wahabtirmizi2969
      @wahabtirmizi2969 5 років тому

      Bahi can you give me a digram of flysky i6 receiver with apm 2.6 for drone

  • @n.trockers1534
    @n.trockers1534 5 років тому +926

    Just because of this project we got 1st prize in our competition thank you

    • @ftk_gaming6626
      @ftk_gaming6626 5 років тому +21

      hi sir how to put aurdino codes please sir tell me

    • @aimanzakria
      @aimanzakria 5 років тому +8

      @@ftk_gaming6626 must hve the apps first

    • @tg.yusofffamily9960
      @tg.yusofffamily9960 5 років тому +2

      ua-cam.com/video/0_Hfnl87A9Q/v-deo.html

    • @surajthapa2139
      @surajthapa2139 4 роки тому +4

      It is a working model or not

    • @n.trockers1534
      @n.trockers1534 4 роки тому +9

      Yes it is a working model

  • @lemredd9724
    @lemredd9724 2 роки тому +82

    Thank you for your help! I have a correction for the schematic tho.
    Servo motor's volt pin should be plugged at 5v and sensor to 3.3v.
    otherwise, the motor would be slow.
    hope this helps anyone who faced the same slow motor problem as me 🙂

  • @evqn5237
    @evqn5237 3 роки тому +108

    Not the man we needed but the hero we deserved! Thank you for helping me with my school projects. I credited you in my powerpoint presentation.

    • @vinaykaushik5945
      @vinaykaushik5945 2 роки тому

      this one is far better , smart Automatic Intelligent Sensor Smart Trash Can Dustbin : ua-cam.com/video/9RivHtAlDW8/v-deo.html

    • @xyengineeringandtechnology8497
      @xyengineeringandtechnology8497 2 роки тому +4

      @@vinaykaushik5945 Do not try to discredit this work by presenting another saying it's far better. You'd have just shared your link without your wrong comment

    • @abhishekghodake6721
      @abhishekghodake6721 2 роки тому +1

      Plz send me report of this project

    • @kengar5979
      @kengar5979 2 місяці тому

      School or college?

  • @rabbyahmed3113
    @rabbyahmed3113 5 років тому +20

    Thank you bro,very Nice, Easy, attractive and hope you will bring many more for us🇧🇩🇧🇩🇮🇳

  • @mr.octopie6199
    @mr.octopie6199 2 роки тому +9

    Really loved the video! thank you for making it, it was very practical for my every day life to have an automatic bin!

    • @Dyadav-p7x
      @Dyadav-p7x Рік тому

      what happen when the battery finieshes?

  • @subhanasif9652
    @subhanasif9652 Рік тому +17

    Absolutely Amazing!
    This is the code for this dustbin:
    #include //servo library
    Servo servo;
    int trigPin = 5;
    int echoPin = 6;
    int servoPin = 7;
    int led= 10;
    long duration, dist, average;
    long aver[3]; //array for average
    void setup() {
    Serial.begin(9600);
    servo.attach(servoPin);
    pinMode(trigPin, OUTPUT);
    pinMode(echoPin, INPUT);
    servo.write(0); //close cap on power on
    delay(100);
    servo.detach();
    }
    void measure() {
    digitalWrite(10,HIGH);
    digitalWrite(trigPin, LOW);
    delayMicroseconds(5);
    digitalWrite(trigPin, HIGH);
    delayMicroseconds(15);
    digitalWrite(trigPin, LOW);
    pinMode(echoPin, INPUT);
    duration = pulseIn(echoPin, HIGH);
    dist = (duration/2) / 29.1; //obtain distance
    }
    void loop() {
    for (int i=0;i

  • @ScitiveX
    @ScitiveX 5 років тому +15

    Very Simple and nice arduino project. Thank for sharing.

  • @theeyeball1109
    @theeyeball1109 11 місяців тому +2

    Thank You. I am actually 8th grade and i wanted to learn robotics.
    Today Finally because of teacher like you I learnt. Thank you once again...... Love from Karnataka

  • @MRINDIANHACKER
    @MRINDIANHACKER 5 років тому +214

    Hi bro i hope you are doing well.... So i just wanted to talk with you if it is possible so please let me know on my mail id.... Regards Mr. Indian hacker

  • @hassanshayan2785
    @hassanshayan2785 5 років тому +7

    You are the future of india brother hatts off
    Love from.Pakistan

  • @Sloorpeez
    @Sloorpeez 5 місяців тому

    thank you i didnt need to make a dustbin but a automatic door the code helped me out a lot also it gave me more ideas thank you so much

  • @ishwarm6947
    @ishwarm6947 5 років тому

    The best audriuno project and the channel which I liked the most because it has told me how to do it easily and cheaply and shown us the programme most channels will not show us the programmes

  • @sheikhljamel7320
    @sheikhljamel7320 5 років тому +6

    Dear sir,
    Project was excellent.Practically usually this kind of big dustbin use at public places and on home & office we usually very small heightened. Anyway appreciate the work.
    Regards

  • @hyraxgaming658
    @hyraxgaming658 4 роки тому +4

    working very much perfectly

  • @davedarshil3822
    @davedarshil3822 5 років тому +1

    Kya baat hai bhai ....
    Thank you bhai ........
    Aap roh geniuse hooo...
    💕💕💕💕💕

  • @nurafreen2143
    @nurafreen2143 3 роки тому +2

    Thankyou so much....this video was too helpful for my project....😍

  • @goodfriday841
    @goodfriday841 5 років тому +9

    we appreciate your effort on this project....

  • @rohitchaurasia1273
    @rohitchaurasia1273 5 років тому +8

    If we use inductive or capacitive sensor instead of ultrasonic sensor. with this same coding does the dustbin will work?

  • @hdr_songs
    @hdr_songs Рік тому

    Shukriya bhai apki coding ki wajah se project mai mujhe ache marks mile mujhe thanku sirrr

  • @solverguru120
    @solverguru120 5 років тому +1

    Bhai aap ka yeh project mughe bahut pasand aaya real me 👌❣️💞💟❣️💟👌

  • @akshit9774
    @akshit9774 3 роки тому +5

    Everytime when i see this video , it helps me a lot :'( ty

    • @dyanreyes1160
      @dyanreyes1160 3 роки тому

      can you pls share the code that you used?

  • @electronic7979
    @electronic7979 5 років тому +4

    Excellent project 👍

  • @TheTechieAbhishekS
    @TheTechieAbhishekS 2 роки тому

    The man we needed, we need you man.

  • @nikshith6431
    @nikshith6431 4 роки тому

    dude you are a great inspiration to me "HATS OFF"

  • @MrMomon-eg3be
    @MrMomon-eg3be 5 років тому +3

    Its working. Thanks you saved me from one of my subject.

  • @adultingishard
    @adultingishard 4 роки тому +6

    Easy and fun project. Thank you!!

    • @delli5
      @delli5 Рік тому

      pls guide me

  • @sonu00778
    @sonu00778 4 роки тому +53

    I became 1st in my state level project competition because of this exact project☺️

    • @arunachalammurali1530
      @arunachalammurali1530 3 роки тому +2

      My servo motor is turning 360 ' does anyone know what to do ?? N sometimes it is turning automatically can anyone say what to do??

    • @humangaming2024
      @humangaming2024 3 роки тому +4

      U Don't deserve this

    • @Dineshkumarvyas
      @Dineshkumarvyas 3 роки тому +1

      Very Good Dear

    • @vinaykaushik5945
      @vinaykaushik5945 2 роки тому

      this one is far better , smart Automatic Intelligent Sensor Smart Trash Can Dustbin : ua-cam.com/video/9RivHtAlDW8/v-deo.html

    • @ericantonyvinhaesprohmann1670
      @ericantonyvinhaesprohmann1670 2 роки тому +1

      @@arunachalammurali1530 Uses mg90s (the black one), not g90.

  • @ahmadizzuddin8402
    @ahmadizzuddin8402 3 роки тому +1

    I really love your video!! It is vry interesting and so understandful

  • @surabandanasahu619
    @surabandanasahu619 5 років тому +13

    With the help of the USB 2.0 cable given with the arduino board, connect it with the arduino to the power bank

    • @Dineshkumarvyas
      @Dineshkumarvyas 3 роки тому

      Heartiest congratulations

    • @vinaykaushik5945
      @vinaykaushik5945 2 роки тому

      this one is far better , smart Automatic Intelligent Sensor Smart Trash Can Dustbin : ua-cam.com/video/9RivHtAlDW8/v-deo.html

  • @kevinchristiancastillo2017
    @kevinchristiancastillo2017 3 роки тому +4

    is it possible to distiguish the wastes as a plastic bottle, biodegradable and non-bio?for waste segregation...

    • @alexdear614
      @alexdear614 Рік тому

      Very good ideea , i think you need a camera with artificial inteligence for this . When the camera detect plastic bottle , automatically gives a signal to the servomotor , i guess

  • @MADPRI_GT-R
    @MADPRI_GT-R Рік тому +1

    Thanks a lot. It was really helpful.
    Made my own SmartBin😄😄

  • @sarpharajahmad7100
    @sarpharajahmad7100 3 роки тому +2

    Amazing project bro... 😍

  • @bhavyagoel2537
    @bhavyagoel2537 5 років тому +50

    Bhai Kamal ki hai
    Maina bhee banaya hai , working perfectly!

    • @saivamshi2269
      @saivamshi2269 5 років тому +1

      bro did u use the same code???????? if yes send me the code by email to saivamshi2209@gmail.com.......pls

    • @amitgupta578
      @amitgupta578 5 років тому +3

      Really it work or not

    • @Meet1802
      @Meet1802 5 років тому +2

      Sir how to upload arduino file

    • @Meet1802
      @Meet1802 5 років тому +1

      Arduino Ka konasa application download karana padega

    • @Meet1802
      @Meet1802 5 років тому +3

      Sir please application ka name batav

  • @kunalchoudhary5552
    @kunalchoudhary5552 3 роки тому +8

    Sir can we add lights when the cap opens of the dustbin and when it closes

  • @siddharthabhimanyu4341
    @siddharthabhimanyu4341 4 роки тому

    You are Amazing Indian life hacker I learn everything about electronic project is from you great video
    I watched your video before from my another account

  • @ryanmendoza399
    @ryanmendoza399 5 років тому +2

    Hello!! Can the sensors be switched out for capacitive sensors to only open to specific materials? Thanks for the reply!

  • @amuthans2986
    @amuthans2986 4 роки тому +3

    What serial port did you use ?

  • @vedant2802
    @vedant2802 5 років тому +5

    Bro igt me. Bhi aagye....I already know you. ❤❤❤❤❤❤

  • @artiwaghmare862
    @artiwaghmare862 5 років тому +2

    Sr.... so amazing arduino project

  • @dnashorts2
    @dnashorts2 5 років тому

    Druv u r the best hats off to u👏👏👏

  • @teamcambodia4689
    @teamcambodia4689 5 років тому +3

    Can you tell me the sensor kinds? I want practice it for my project.

    • @vinaykaushik5945
      @vinaykaushik5945 2 роки тому

      this one is far better , smart Automatic Intelligent Sensor Smart Trash Can Dustbin : ua-cam.com/video/9RivHtAlDW8/v-deo.html

  • @aayush212
    @aayush212 5 років тому +9

    Nice project but u can make it much cheaper by using arduino nano or attiny 45 in place of uno and in place of servo you can use small dc motor with lid stopper. It will cost you around 300 or less. And to make it more innovative you can use rechargeable battery with a little solar panel to make it more independent. Good work 👍

  • @horwenjie5332
    @horwenjie5332 Рік тому +2

    The 9v battery connect directly to Ardunio UNO (no need soldering in the jumper wire)?

  • @arbaazkhan326
    @arbaazkhan326 4 роки тому +1

    Can we control 180 degree rotation speed of servo motor... In 2 different speed modes using any switch or something

  • @Manjar_premi
    @Manjar_premi 4 роки тому +6

    Because of this I won first prize in a competition. So thank you!!!

    • @immiteshk
      @immiteshk 4 роки тому

      Did the code work properly without any problem?

    • @vinaykaushik5945
      @vinaykaushik5945 2 роки тому

      this one is far better , smart Automatic Intelligent Sensor Smart Trash Can Dustbin : ua-cam.com/video/9RivHtAlDW8/v-deo.html

  • @harshsparikh
    @harshsparikh 5 років тому +11

    This was so intuitive. Where did you learn the foundations? can you please share the links?

    • @vinaykaushik5945
      @vinaykaushik5945 2 роки тому

      this one is far better , smart Automatic Intelligent Sensor Smart Trash Can Dustbin : ua-cam.com/video/9RivHtAlDW8/v-deo.html

  • @anwesharai13
    @anwesharai13 4 роки тому +1

    thank you very much
    very helpfull for begginers

  • @iffathumaira4846
    @iffathumaira4846 4 роки тому +2

    Amazing Project...Just wanted to know how are u opening and closing the lid, can u please explain how does it happen??..Thanks in Advance

  • @atlantaenterprices3600
    @atlantaenterprices3600 4 роки тому +6

    Yes I tried to do this project for my kid, It is so helpful the codes which was send by you. while i running this program i am getting an error message as " exit status 1
    Error Compiling for aboard Arduino Uno."
    Give me ur suggestions..

    • @NZHCreations
      @NZHCreations 3 роки тому

      check mine

    • @vinaykaushik5945
      @vinaykaushik5945 2 роки тому

      this one is far better , smart Automatic Intelligent Sensor Smart Trash Can Dustbin : ua-cam.com/video/9RivHtAlDW8/v-deo.html

  • @shivambhaskar2670
    @shivambhaskar2670 5 років тому +4

    Sir please can you make drone with arduino and GPS and telemetry plz sir

  • @o.c2231
    @o.c2231 5 місяців тому

    Your videos are brilliant 😎keep up the great work💪

  • @izarcastillo1286
    @izarcastillo1286 3 роки тому +2

    Do you use battery plugger here in this project? Thanks for replying, badly need your help

  • @imranhakim5006
    @imranhakim5006 4 роки тому +2

    Why my dustbin cannot close the lid automatically

  • @yashgoyal8064
    @yashgoyal8064 4 роки тому +80

    Please tell me how to make automatic homework machine with aurdino

    • @oliveoil4368
      @oliveoil4368 4 роки тому +5

      😂😂😂

    • @blogsbarrel4734
      @blogsbarrel4734 4 роки тому +10

      Bhai kuch to khud karle hilaega bhi machine se kya ?? Just kidding 😬😬😬😬

    • @messifan2310
      @messifan2310 4 роки тому +1

      search in youtube you will get
      i saw many videos about it

    • @S.raj3740
      @S.raj3740 4 роки тому +1

      Code kaise download krte hai Arduino me wo smj me nahi aaya

    • @gamingwiththunder6859
      @gamingwiththunder6859 4 роки тому

      @@S.raj3740 download Arduino Uno in your PC or laptop. Then connect and do coding

  • @aliengamer1716
    @aliengamer1716 2 роки тому +1

    What if i place a hand in front of the sensor range, the distbun lid will open and close. But if i don't remove the hand from the range, after lid closes will it open again? Or should the hand needed to removed from range?

  • @mehdinaqvi.5081
    @mehdinaqvi.5081 Рік тому +1

    This video saves my year..thanks alot 🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥❤️❤️❤️❤️

    • @prabhatnayak9448
      @prabhatnayak9448 Рік тому

      क्या इस प्रोजेक्ट को करते समय आपको किसी त्रुटि का सामना करना पड़ा? क्या सावधानियाँ बरतनी चाहिए? आप कृपया मुझे बताएं।

  • @odelasiddharthvlogs6365
    @odelasiddharthvlogs6365 5 років тому +8

    Sir make a project on voice controled Home Automation

    • @digvijaylad803
      @digvijaylad803 4 роки тому +1

      Yes

    • @vinaykaushik5945
      @vinaykaushik5945 2 роки тому

      this one is far better , smart Automatic Intelligent Sensor Smart Trash Can Dustbin : ua-cam.com/video/9RivHtAlDW8/v-deo.html

  • @vinayvilasshinde4595
    @vinayvilasshinde4595 5 років тому +5

    Sir in need some help so how can I contact to you?

  • @rekhamonigogoi490
    @rekhamonigogoi490 4 роки тому

    OK so you fixed the arduino board and 9v cell inside the dustbin... Great 👏

  • @levelupnowwths
    @levelupnowwths 11 місяців тому

    Thanku this helped to be in the state level😊

  • @krishivpimpale2955
    @krishivpimpale2955 4 роки тому +8

    Because of your project I got first prize in my robotics competition

    • @adityakokanay
      @adityakokanay 4 роки тому

      bro wheres the code? can u send it to me??

    • @vishalchauhan9832
      @vishalchauhan9832 4 роки тому

      @@adityakokanay check description

    • @kunalnagarkoti1841
      @kunalnagarkoti1841 4 роки тому

      @@adityakokanay without coding will this project works ?

    • @akash-zg4vj
      @akash-zg4vj 4 роки тому

      @@kunalnagarkoti1841 how do you even imagine that

    • @kunalnagarkoti1841
      @kunalnagarkoti1841 4 роки тому

      @@akash-zg4vj I want coding for this project

  • @sanjaymeher29
    @sanjaymeher29 5 років тому +30

    How to load the program on the arduino...?
    Tell plz.... Amergency heii.... 😮😨

    • @elitepass6910
      @elitepass6910 4 роки тому +1

      Arduino ite ke soft ware ko download kr k

  • @zgamingzonewithps4784
    @zgamingzonewithps4784 3 роки тому +1

    Thanx because of your project I got an certificate in my electrical project

    • @dyanreyes1160
      @dyanreyes1160 3 роки тому

      can you pls share the code that you used?

  • @8.shankercs254
    @8.shankercs254 5 років тому

    Thanks i done this project working perfectly

    • @slayzx9692
      @slayzx9692 5 років тому

      Sikha de na mujhe bhi mera whatsapp no 9402468565

  • @RanjeetSingh-zq6kl
    @RanjeetSingh-zq6kl 4 роки тому +3

    Sir, urduino based agriculture system

  • @deepanshusharma5384
    @deepanshusharma5384 5 років тому +3

    i had ordered my material. are u sure my expenditure on this would be worth-full.

    • @anshjayara2347
      @anshjayara2347 3 роки тому

      Is the website which he linked in description safe??

    • @deepanshusharma5384
      @deepanshusharma5384 3 роки тому

      @@anshjayara2347 Yes

    • @deepanshusharma5384
      @deepanshusharma5384 3 роки тому

      @@anshjayara2347 Its really awsm everything was working and even I made this project myself and was worthfull.

    • @deepanshusharma5384
      @deepanshusharma5384 3 роки тому

      @@anshjayara2347 If u want prof then please contact my school..my dustin must be in the exhibition lab. INDRAPRASTHA SCHOOLS. Just its quite tricky when we joins wire we need to solder arnd

  • @archanapriyadarshini4362
    @archanapriyadarshini4362 4 роки тому

    thank u bro for wonderful experiment

  • @MotivationAfz
    @MotivationAfz 2 роки тому

    Aaj hi ye model banaya hai good work kar raha hai

  • @PremKhunt
    @PremKhunt 5 років тому +3

    #include //servo library Servo servo; int trigPin = 5; int echoPin = 6; int servoPin = 7; int led= 10; long duration, dist, average; long aver[3]; //array for average void setup() { Serial.begin(9600); servo.attach(servoPin); pinMode(trigPin, OUTPUT); pinMode(echoPin, INPUT); servo.write(0); //close cap on power on delay(100); servo.detach(); } void measure() { digitalWrite(10,HIGH); digitalWrite(trigPin, LOW); delayMicroseconds(5); digitalWrite(trigPin, HIGH); delayMicroseconds(15); digitalWrite(trigPin, LOW); pinMode(echoPin, INPUT); duration = pulseIn(echoPin, HIGH); dist = (duration/2) / 29.1; //obtain distance } void loop() { for (int i=0;i

  • @sarveshnaik3663
    @sarveshnaik3663 4 роки тому +5

    Will this code work which u hve mentioned in the description ...I asked this because before I had did voice control Arduino project for that I had struggled lot for code
    . reply

    • @akash-zg4vj
      @akash-zg4vj 4 роки тому

      Just write the code yourself or search Google for base code. That you can modify as you need

  • @nehabogal4803
    @nehabogal4803 4 роки тому

    Super project bro well done ...but in comment session many of them don't like your project but I like your projects

  • @MEETPANCHOLI07
    @MEETPANCHOLI07 4 роки тому +1

    Hey, if we are to integrate this system with a website, how would we be able to do it?

  • @shobitggupta65
    @shobitggupta65 5 років тому +10

    Sir tell us in next video how to make a tesla coil step by step

  • @mansiyadav5203
    @mansiyadav5203 5 років тому +5

    3:13
    👌😉👌😉👌😉👌

  • @umapadmanathan8396
    @umapadmanathan8396 Рік тому

    Thanks bro my dustbin worked

  • @varuslimogneemegni499
    @varuslimogneemegni499 4 роки тому +1

    thanks for this projet because, this projet help me so much!!

    • @dyanreyes1160
      @dyanreyes1160 3 роки тому

      can you pls share the code that you used?

  • @vaishusbeautifulworld2450
    @vaishusbeautifulworld2450 5 років тому +4

    I am doing this as atal project sure it will come say

    • @arunachalammurali1530
      @arunachalammurali1530 3 роки тому

      My servo motor is turning 360 ' does anyone know what to do ?? N sometimes it is turning automatically can anyone say what to do??

  • @akashsinghpundir7863
    @akashsinghpundir7863 5 років тому +3

    Bro make a video on fingerprint lock door's......

    • @rishabhraj4779
      @rishabhraj4779 5 років тому

      Hey guys see this channel #rrexperimentsattack

  • @anjansiddharth5687
    @anjansiddharth5687 4 роки тому

    💯💯💯💯💯💯💯
    This video is awesome we made it for our science fair 100% successful just took 2 to 3 hours

  • @AsmaraLawal
    @AsmaraLawal 8 місяців тому +1

    thanks this helps a lot

  • @shivangsharma7099
    @shivangsharma7099 5 років тому +4

    Which software do you have in your laptop while adding the coding in arduino .please reply fast

  • @TALHACREATIVE
    @TALHACREATIVE 2 роки тому

    Thank you so much for this video

  • @kavitachoudhary3325
    @kavitachoudhary3325 5 місяців тому

    Very clear project and so easy

  • @tonymathew5618
    @tonymathew5618 4 роки тому +8

    You could achieve the same thing with a motion sensor and a solinoid which would cost much less than this.

    • @mwdnow
      @mwdnow 3 роки тому +2

      I know it was a year since you commented but would you mind posting a couple links to where I can get the appropriate motion sensor and solenoid online?

  • @shreyanshagrawal5248
    @shreyanshagrawal5248 5 років тому +18

    Can you pls make a smart movable dustbin which collects the garbage itself

  • @techeasy602
    @techeasy602 4 роки тому

    Thank you so much bhai💪👑💗keep it up😎😎

  • @tameemgharade4773
    @tameemgharade4773 4 роки тому

    Ek number bhai🤙🔥♥️

  • @prateek9061
    @prateek9061 4 роки тому +7

    0:56 seriously arduino uno in dustbin 😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂

  • @shridharmalagond3603
    @shridharmalagond3603 4 роки тому

    Bro we should use dust bin for that or any box also we can use ??

  • @hizonopusdie
    @hizonopusdie 5 років тому

    Which is better in creating this smart dust bin, Arduino UNO or Nano?

  • @user-dz3ju3bp5r
    @user-dz3ju3bp5r 5 років тому +2

    The code didn’t work with me 😩

  • @anjanasojitra1459
    @anjanasojitra1459 4 роки тому +3

    More faster way is to keep the dustbin without liid

  • @aniharstudies0904
    @aniharstudies0904 2 роки тому

    Thank you very much bro. Just iam studying 8th but with your video it success for me😄😄😄😄😄😄

  • @fenilpatel2858
    @fenilpatel2858 5 років тому +1

    Sir is this useful only for dry waste only or any kind of waste materials?

  • @B8ndu
    @B8ndu 5 років тому +3

    Bro u told u will make a cheap drone

  • @LakhanSingh-li8jd
    @LakhanSingh-li8jd 4 роки тому +3

    Amazing, I was tired of opening the lid of dustbin which takes around 1second, now I just have to buy these electronic components which nearly cost me around 700₹ only. What an idea!

  • @RTPrime
    @RTPrime 5 років тому +1

    What material have u used for making the lid?

  • @juantunas6276
    @juantunas6276 4 роки тому +1

    este video me ha aprobado tecnologia gracias

  • @ayushrai7088
    @ayushrai7088 4 роки тому +8

    Ye koode ko dustbin ke sensor ke aage lane mai tym waste krne se acha mai paddle se hi n khol lu😂...GTFO