There is the Emory Gap Yard in Harriman Tennessee in the NS Rathole district. There is a spur line that shoots off to the Kingston TVA steam plant. The mainline averages about 55-65 trains per day.
Can’t wait for the new camera! You should consider getting a camera in Pacific, Missouri. There’s already a depot with ATCS and the Bnsf Cuba sub and the Jefferson City sub run parallel to each other and Union Pacific get up to 60 miles an hour. It’s the same line that runs by the St Louis camera, it’s about a 30-40 minute drive from STL. Anyways, thank you for all you do!
I'm excited for the new railcam, but I also feel sorry for those folks who live in Houston. May those victims make a full recovery as much as possible. If not, may they rest in peace.
Thanks for the update ! Hope and Prayers for all areas affected by Beryl!! Caught a glimpse of multi cam when y'all showed it . Was super cool looking ! Canada hah will be fun !!
I think a good spot for another Cam would be at the Longview Tx Depot. I've talked with them about they say they would love a cam. The yard sees quite a bit of action with other railroads locomotives mixed in with alot of trains the amount of Heritage units we see come through is also quite high.
Add a camera on the line at West Bellfort just west of Stella Link this line has lot of trains train will park on the track often and there is Amtrack Almost daily.
Once I can find out who runs the Griffith Railroad Society in Griffith Indiana, hopefully a better railcam can be installed at their site, than the Steelhighway Railcam thats already there. It would be nice to see recaps of all of the Canadian National trains that run through there at Broad Street. At that intersection, most trains run on the former EJ&E, and on the Canadian National line east of Broad Street, as most trains are routed around Chicago, if they're going to, or from Wisconsin. Trains needing access to the former Illinois Central lines, have used the former EJ&E since 1997.
@midwesternrail4729 why do you think Steelhighway Railcam is good enough? Both Virtual Railfan and even Livetrains would give this site a lot more exposure, and be included in highlights in UA-cam videos. This is something Steelhighway Railcam does a poor job on. I prefer Virtual Railfan the most, as they've grown, and actually promote railroad events. This might be something Livetrains will do, once the network of railcams go online. 1 railcam is not enough in my opinion. Some sites have more than one. One of Virtual Railfan's cameras in Rochelle Illinois, VR said that this site has 3 different railcam operators operating at one site. I say there's room for another one.
Competing railcam site, Virtual Railfan, won't touch most short lines, as they don't draw the traffic they want. I don't know what the criteria for Livetrains is, for the number of trains in a 24 hour period. VR requires a minimum of 20 trains in a 24 hour period. In NW Indiana, that would immediately exclude the Chicago, Fort Wayne, and Eastern Railroad, as they run at the most, 3 trains a week. This also would exclude the Chesapeake and Indiana, which was created, after CSX was planning to rip out the surviving track between Malden and North Judson Indiana, that was part of the former Chicago to Cincinnati line, as well as the portion that is between LaCrosse and Wellsboro Indiana.
greeting from houston! you are correct on all....and I was wondering why tower 26 wasn't loading. good to know: as for the ads. excited for the multiview, it helps a bit driving near there. i wonder if houston would be open to more cameras?
Suggesting for another camera, or cameras,Central Ave, Metairie La, where trains cross the Huey P. Long train bridge over the Mississippi river. You can see Amtrak’s City of New Orleans and the Sunset Ltd. And all the class one’s pass there, UP, NS, CSX, CPKC, CN, BNSF and New Orleans Public Belt!
Honestly I would like to see a Cam In My area, there's some pros and cons about the line that is trough here but most of the time alot of good power can run up here
You should make a camera in Gary Indiana, it gets 150 trains a day featuring NS, CSX, and CN. I just got back from there and have 5+ hours of footage in just 2 days
Pretty disappointed with the Des Plaines camera being members only, I was looking forward to having a camera on my line, and instead it’s going to be locked behind a membership. If you could at least make it free besides the multiview?
Thanks for the updates! I can't wait for Birmingham, AL! It will be a hit for ALL!
Hello Aaron! Thanks for introducing yourself and for Updating us on the Great Channel Updates going forward. Keep up the strong 💪 efforts. Thanks! 👍🙏
Much appreciated!
There is the Emory Gap Yard in Harriman Tennessee in the NS Rathole district. There is a spur line that shoots off to the Kingston TVA steam plant. The mainline averages about 55-65 trains per day.
You guys should add a railcam in San Antonio, TX at Tower 105 and I hope Houston’s residents gets their power back and get recovered from this storm.
We were looking into this. If you know any contact out there please let us know.
Still dont have power backup generator is powering my house
Can’t wait for the new camera! You should consider getting a camera in Pacific, Missouri. There’s already a depot with ATCS and the Bnsf Cuba sub and the Jefferson City sub run parallel to each other and Union Pacific get up to 60 miles an hour. It’s the same line that runs by the St Louis camera, it’s about a 30-40 minute drive from STL. Anyways, thank you for all you do!
Very interesting. We will look into this as well.
this is very scare, my cat is sad
I'm excited for the new railcam, but I also feel sorry for those folks who live in Houston. May those victims make a full recovery as much as possible. If not, may they rest in peace.
Thanks for the update ! Hope and Prayers for all areas affected by Beryl!! Caught a glimpse of multi cam when y'all showed it . Was super cool looking ! Canada hah will be fun !!
We appreciate you watching!
Thanks for the update Aaron!
Thank you Abel!
AAAAAAABBBBBEEEELLLL
I think a good spot for another Cam would be at the Longview Tx Depot. I've talked with them about they say they would love a cam. The yard sees quite a bit of action with other railroads locomotives mixed in with alot of trains the amount of Heritage units we see come through is also quite high.
Awesome, I appreciate you letting us know. I'll plan to reach out this upcoming week.
Add a camera on the line at West Bellfort just west of Stella Link this line has lot of trains train will park on the track often and there is Amtrack Almost daily.
They already have a camera in that line.
Once I can find out who runs the Griffith Railroad Society in Griffith Indiana, hopefully a better railcam can be installed at their site, than the Steelhighway Railcam thats already there. It would be nice to see recaps of all of the Canadian National trains that run through there at Broad Street. At that intersection, most trains run on the former EJ&E, and on the Canadian National line east of Broad Street, as most trains are routed around Chicago, if they're going to, or from Wisconsin. Trains needing access to the former Illinois Central lines, have used the former EJ&E since 1997.
Thank you!
Steel highway is good enough.
@midwesternrail4729 why do you think Steelhighway Railcam is good enough? Both Virtual Railfan and even Livetrains would give this site a lot more exposure, and be included in highlights in UA-cam videos. This is something Steelhighway Railcam does a poor job on. I prefer Virtual Railfan the most, as they've grown, and actually promote railroad events. This might be something Livetrains will do, once the network of railcams go online. 1 railcam is not enough in my opinion. Some sites have more than one. One of Virtual Railfan's cameras in Rochelle Illinois, VR said that this site has 3 different railcam operators operating at one site. I say there's room for another one.
@@davenwin1973 steel highway better
Excellent Work Aaron!
Thank you!
I can only hope the reference to the west coast is either the BNSF or UP main lines in the Inland Empire, ie Riverside or San Bernardino Counties.
It's not one of those sites but that is on the list for the future.
Thanks Aaron.
I don't have money for membership unfortunately
All good, enjoy the cams. Perhaps in the future you can sign up!
Canada and short line, Keewatin Railway Company
Competing railcam site, Virtual Railfan, won't touch most short lines, as they don't draw the traffic they want. I don't know what the criteria for Livetrains is, for the number of trains in a 24 hour period. VR requires a minimum of 20 trains in a 24 hour period. In NW Indiana, that would immediately exclude the Chicago, Fort Wayne, and Eastern Railroad, as they run at the most, 3 trains a week. This also would exclude the Chesapeake and Indiana, which was created, after CSX was planning to rip out the surviving track between Malden and North Judson Indiana, that was part of the former Chicago to Cincinnati line, as well as the portion that is between LaCrosse and Wellsboro Indiana.
Great video! Thank you for the updates and keep it up!
Thanks, will do!
Try to add a camera by Pinehurst Tx where BNSF and UP meet usually there is likely more active
We've talked about Pinehurst. If you know anybody out there willing to host us please let me know.
I really like to see a camera in New Braunfels at New Braunfels railroad museum any chance that happening?
Fayetteville NC Dunn nc Raleigh and Durham are great locals
We are working on this! Very harsh enviroment though.
Salisbury NC would be an awesome location
If you know property owners out there we'd love it if you introduced us.
Any camera in Montana be cool
Hello
Hey!
greeting from houston! you are correct on all....and I was wondering why tower 26 wasn't loading. good to know: as for the ads. excited for the multiview, it helps a bit driving near there. i wonder if houston would be open to more cameras?
Thank you! We're excited too. Yes, there are other spots that we may start crowd funding for shortly.
Suggesting for another camera, or cameras,Central Ave, Metairie La, where trains cross the Huey P. Long train bridge over the Mississippi river. You can see Amtrak’s City of New Orleans and the Sunset Ltd. And all the class one’s pass there, UP, NS, CSX, CPKC, CN, BNSF and New Orleans Public Belt!
I already have ad free on UA-cam premium
I think a railcam near BRC Clearing Yard by the West Departure Yard would be a treat.
That would be interesting.
Hi Aaron I'd like to make a suggestion for a camera
How about Butler Indiana. I think it would be great. Have a good day.
Thank you, we will look into this.
Great video! Keep it up!
Thank you!
Honestly I would like to see a Cam In My area, there's some pros and cons about the line that is trough here but most of the time alot of good power can run up here
Chicago. Amtrak. Passenger Yard. Enuff said. Thank you.
The CN/UP jct at west chicago would be a great view for a cam, but i don't know if there would be a good spot to set up
Thats always the tough part :/
Add a railcam Beaumont
Hello Kaden, if you have a place in mind and have the property owners contact please let us know.
Sounds good! Des Plaines, IL is pronounced Dis-Plainz. Should be an active cam. Also, looking forward to Birmingham, AL.
Thank you. I'll work on my pronunciation for sure.
You should make a camera in Gary Indiana, it gets 150 trains a day featuring NS, CSX, and CN. I just got back from there and have 5+ hours of footage in just 2 days
That's incredible! We'll have to look into this more.
Honestly kinda sucks with the membership stuff
I hear ya! We have to pay bills my friend. Current cams will remain free and SOME future cams will be for the members.
That’s understandable
Wow can’t wait see Canada’s camera
@LIVETrains what level of membership do we need to be at to view the new cameras
Hey Christian, premium level members get access to members only cameras
Pretty disappointed with the Des Plaines camera being members only, I was looking forward to having a camera on my line, and instead it’s going to be locked behind a membership.
If you could at least make it free besides the multiview?
I’m subscribed to the channel how do I become a member?
Hello Blake, at the top left just to the right of where is says "Subscribed" you'll see a "Join" Button. Let me know if you have more questions.
Will the Des Plaines camera be near or at the diamonds in town?
Yes, you'll have a great shot of the diamonds
@@OfficialLiveTrains Nice!
Des Plaines
Dess
Des Plaines is pronounced Dez Planes locally.
Elmhurst il it busy make it free to watch and make it free to what the des planes cam you will be sub
T@no ???