If Your Inverter Is Completely Shut Down Then Watch This Video || Mr. Home Made || In Hindi

Поділитися
Вставка
  • Опубліковано 16 жов 2024
  • In this video we have done UA-cam Mr. Homemade (Rakesh Kumar) channel
    Information about inverter and battery is given
    If your inverter is giving deep beep sound
    and inverter is not charging battery
    And inverter output is also not giving 220 volt electricity output
    then watch this video carefully
    First of all, we have to check the voltage of inverter battery with the help of multimeter.
    And the multimeter showed that only 4 volts were left in the battery.
    And let me tell you for your information that if the battery of the inverter goes down more than 10 volts
    so inverter stops working inverter neither charges battery nor gives 220v electricity output
    So, to fix the inverter battery, we have to disconnect both the wires of the inverter from the battery.
    and connect the battery to the charger
    You have to put the negative positive wires of the charger on the terminal of the battery.
    And keep in mind that the terminal of the battery on which there is a minus sign, there will be a black negative wire of the charger.
    And the terminal of the battery on which the plus sign is attached, there the red positive wire of the charger will be connected.
    Remember if you ever put wrong in inverter or charger battery then your inverter charger will get damaged.
    That's why you have to install the battery wiring carefully
    And then you have to give electricity connection to the charger (220 volt) and the humming sound will start in the charger which shows that the charger is charging the battery.
    And the charger shown in this video took 24 hours to charge the battery.
    And after 24 hours we checked the voltage of the battery with a multimeter, then the battery had become 12 volts.
    Then we removed the charger wires from the battery
    Electricity (220V) was supplied to the inverter by connecting the negative and positive wires of the inverter to the terminal of the battery.
    And the main indication of the inverter turned on and the charging indication of the inverter also started running.
    And the inverter also started giving 220 volt output supply.
    Thank you very much from Mr Home Made (Rakesh Kumar) for watching the video.
    इस वीडियो में हमने यूट्यूब मिस्टर होममेड (राकेश कुमार) चैनल पर
    इनवर्टर और बैटरी के बारे में जानकारी दी है
    अगर आपका इनवर्टर दीप बीप की आवाज दे रहा है
    और इनवर्टर बैटरी भी चार्ज नहीं कर रहा
    और इनवर्टर आउटपुट 220 वोल्ट इलेक्ट्रिसिटी ऑरकुट आउटपुट भी नहीं दे रहा
    तो यह वीडियो ध्यान से देखें
    सबसे पहले हमने इनवर्टर की बैटरी के वोल्ट मल्टीमीटर की मदद से चेक करने हैं
    और मल्टीमीटर से मालूम हुआ की बैटरी में सिर्फ 4 वोल्ट ही बचे थे
    और मैं आपकी जानकारी के लिए बता दूं कि अगर इनवर्टर की बैटरी 10 वोल्ट से जयादा डाउन हो जाती हैं
    तो इनवर्टर काम करना बंद कर देता है इनवर्टर नाही ना तो बैटरी को चार्ज करता है और ना ही 220वोल्ट इलेक्ट्रिसिटी आउटपुट देता है
    तो हमने इनवर्टर बैटरी को ठीक करने के लिए बैटरी से इनवर्टर की दोनों तारे खोल देनी है
    और बैटरी को चार्जर के साथ कनेक्ट करना है
    बैटरी के टर्मिनल पर आपने चार्जर की नेगेटिव पॉजिटिव तारे लगानी है
    और ध्यान रहे बैटरी के जिस टर्मिनल पर माइनस का साइन लगा है वहां पर चार्जर की ब्लैक नेगेटिव तार लगेगी
    और बैटरी के जिस टर्मिनल पर प्लस का साइन लगा हुआ है वहां पर चार्जर की रेड पॉजिटिव तार लगेगी
    याद रखें अगर आप कभी भी इनवर्टर या चार्जर की बैटरी में गलत लगा दोगे तो आपका इनवर्टर चार्जर खराब हो जाएगा
    इसीलिए आपने बैटरी की वायरिंग ध्यान से लगानी है
    और फिर आपने चार्जर को (220 वोल्ट) इलेक्ट्रिसिटी कनेक्शन दे देना है और चार्जर में हमिंग की आवाज स्टार्ट हो जाएगी जो तो पता चल जाता है कि चार्जर बैटरी को चार्ज कर रहा है
    और इस वीडियो में जो चार्जर दिखाया गया है इस चार्जर ने बैटरी को चार्ज करने के लिए 24 घंटे का टाइम लिया है
    और 24 घंटे के बाद हमने मल्टीमीटर से बैटरी की वोल्टेज गोल्ड चेक किआ तो बैटरी मैं 12 वोल्ट बन चुके थे
    तो फिर हमने बैटरी में से चार्जर की तारें उतारकर
    इनवर्टर की नेगटिव और पोस्टिव तार बैटरी के टर्मिनल में लगाकर इनवर्टर को इलेक्ट्रिसिटी (220वोल्ट) की सप्लाई दी
    और इनवर्टर की मेन इंडिकेशन ऑन हो गई और इनवर्टर की चार्जिंग इंडिकेशन भी चलने लगी
    और इन्वर्टर २२० वोल्ट आउटपुट सप्लाई भी देने लगा
    वीडियो देखने के लिए मिस्टर होम मेड (राकेश कुमार) की तरफ से बहुत बहुत धन्यवाद्|

КОМЕНТАРІ • 1