As far as it hinging when you lift it, just keep a small scrap of wood on hand to clamp over the top of the blade, to keep it all snug while carrying. Great review and quick start guide.
I have found that sliding the blade into the guides and then around the wheels is considerably easier. Otherwise, when bending to put the blade in the guides the top of the blade can pop off the wheels and bite you with the teeth of the blade.
Very good review. I like that you demonstrated how easily it cuts through different types of stock and wall thicknesses.
Thanks for letting me know, much appreciated. I try to be as thorough as possible when reviewing tools so others can make an informed decision 👍
As far as it hinging when you lift it, just keep a small scrap of wood on hand to clamp over the top of the blade, to keep it all snug while carrying. Great review and quick start guide.
just received the Vevor Bandsaw... SWEEEET!!!
Great review, thanks.
I have found that sliding the blade into the guides and then around the wheels is considerably easier. Otherwise, when bending to put the blade in the guides the top of the blade can pop off the wheels and bite you with the teeth of the blade.
I believe the reason the cord comes out by the handle is for when it is used without the base. The same saw is available without the base attachment.
True, it is exactly the same unit, but would be better with the power cord at the rear rather than in the front where it gets in the way.
These Are Cool, I Bought One 7 Years Ago When I Built My Tiny House.
Yeah, very handy for steel cuts, I love it👌
Me hubiera gustado ver un corte 45 en un perfil tubular de 4 pulgadas
Pass the power cord through the back handle when using as a chop saw. Leave the power cord as is while using as a portable.
just observin the design, this seems miles ahead of the hervulese one at HF.
the herculese one is super jank.
Can you use it freehand - or just in the horizontal plate?
This model is attached to the base plate, but they sell a cheaper version that doesn't have a base plate.
It can be used either way.
The video would have been much better if you showed the actual cutting time instead of speeding up the cuts.
What is price
All links in description or check VEVOR website for wherever you're located.
CAN I BORROW IT?
Absolutely!!
Can we use this machine for cut the hard steel 304 .25 mm thickness
Probably.... its a steel bandsaw.
mine the blade keep on jumping
Maybe pushing too hard on stock? Or try tensioning the blade?