I’m doomed. Just ordered the entire set for the cyber Monday deal. Ive got massive hands so im gonna be screaming obscenities for the better half of an afternoon.
Lasfit makes these I just ordered The for my 2023 Z71. Red for brake and amber for signal 7443 7444 Red CanBus LED Bulbs Turn Signal Brake Tail Lights | Error Free Anti Hyper Flash, T3 Series Upgraded Version
So, I put in the same kit on my 2023 Colorado Trail Boss you did using your part numbers. Did you have any problems fitting the dust cover back on the low beam? My covers don't seem to wanna fit? Looks as if they are too shallow to fit the fan.
No, but I will tell you I had to play with it a little bit, you have to talk the wires and move things around with your hand, and it will go back on with a little bit of finesse
For the love of God my dust covers can’t go on properly. Fan is to big. I got them on by they are not fitted 100%. Maybe like 80% or the way. Spent two hours on something that should have taken 25 mins tops.
I only ended up putting in the high beams because they were not feeling solid. The o-rings don't seem thick enough and I'm going to contact Lasfit support. Are you able to make the bulbs move by merely touching them? Used LAplus 9005
No, mine are a pretty solid fit, and I got the caps back in afterwards as well. It could just be the positioning was off or they didn’t clip in properly.
no, nothing too crazy, it does make a series of clicks when you shut the truck off, but that is completely normal. Other than that, I haven’t heard any noise as well. The truck is running or anything.
Hey bud! Thank you for the cool video on the install of these! Super helpful and appreciated. I know you don’t have the stock fog lights like on the z71, but was wondering if you knew which Lasfit led would work on a 2023 z71 with them? Thanks!
Love these lights, however my drivers side now has condensation. I’ve taken the bulbs out and put them back in. I can’t figure out where the issue is. Maybe the cover on the back is the issue?? Not sure.
So I just got these. I was just barely able to get my hands on to wiggle these high beams out... But I could not twist them back in. Had to sorta shimmy some pliers down there and slowly work it around. 🤦
Were you able to reinstall the large plastic cap after installing the low beams? I tried one brand of LED bulbs and the fan unit was too large and I couldn't screw the large cap back on.
Travis, thank you for the Colorado videos. I have a very similar Trail Boss and have found the videos very useful. Quick question, were your high beam Lasfit LEDs somewhat loose when installed in the housing? I’m not sure if maybe I turned too hard but both of my high beams are snug, but can move. The white bracket that secures in the housing appears to be loose from the bulb/fan, secured only by o-rings, so mine jiggle a bit, but it’s not noticeable while driving. Also, not sure how I’ll ever get those brackets out if need be (the bulb slips out from the bracket), but we’ll cross that bridge if we get there.
I have this same issue when I installed last night. This just seems like a terrible design and there is way to much slop on the bulb when installed. I will be sending these back
@@iBxUnrATEdx1 I had to mess around with mine, push the wires inside into the side and then try to secure that locking cap, it’s the wires that are getting in your way
@JT4x4offroading - Just added these (high and low beams) no real issues on install... But now the real question - I'm now seeing that there is a possible issue with VA State inspection... apparently the LAZFIT high and low beam LEDs are not DOT? You're in VA, have you passed the state inspection with these?
Travis, I bought the amber corner lights from lasfit and i can’t seem to find how to get into the headlight themselves. Have you looked into them or no?
I actually have not replaced the Amber corner lights, I would have to look at how to get to them, they are very small, so it might require pulling the light fixture. Just a thought, not 100%.
Hey Travis, asked these same questions on another technician I sub to, his installation was with the AUXILAM LED kit, but see you opted for LASFIT. With the TB's Auto/On/Off feature of the truck, do you see the light flicker? Typically I see this when im at a light or a stop, the engine cuts and then when it re-starts the light pulses. Concerned with confusing drivers on the other side, would love to hear your testimony with the LASFIT product. Their support team said their lights have something built in to prevent this but want to hear from others before I purchase another light kit again.
it’s perfectly normal for your light to pulsate when the auto start stop feature is enabled, when it restarts the engine, it sends power from the battery to the starter, which makes your electronics power up and will cause an surge for all headlights, LED and non LED. You should see them pulse slightly upon start up. While it's running you shouldn't see any sort of flicker.
same issue here, it just annoys me too much when i see my low beams flicker then the auto on/off kicks in, do these LASTFIT brand headlights do the same?
No, it has to directly be the cause of an issue. If something did happen, which I dkubt it ever will just keep the old lights and switch it out. I have used LEDs for years and it's never caused any issues. LEDs use less power than halogens.
looking good. i got the switchbacks you got but they do not work in the z71 . found out that the trailboss has a duel function turn sig and the z71 is only a single . really crappy of gm. but then again th trial dose not have hte daytime running stripe but it would be nice to have the daytime go all the way to the grill.
Ya if you have any electric issue you have to put in the orginal bulbs for GM to make any cases. Dealership told me that as well when i had the truck info the radio update. even tho the lcd take about 30% less voltage on top of that@@braydonbriggs9066
Cover turns to your left of the truck. Lefty loosy, righty tighty. Bit of a pain but definitely comes off if you put pressure and kinda let it turn like the video says😊
I struggled with it too on the first one. They don’t even need to turn a quarter turn. It will feel like they should turn more but are stuck, but that may be the gasket holds tight. You may need to use a flat m head screwdriver to gently pop the caps off.
SO I installed these last night, The high beam mounting design is terrible. The only thing holding them in is a silicone O ring. Have you hade any bulb movement since you installed?
Hey man, you think you could tell me and or maybe do a short on how far the drivers seat reclines? I cant seem to find anything on that in any reviews. I shol like my lunch break naps at times lol
Then it’s not installed right. Have these same bulbs and never get flashed. Make sure the chips are facing 9 and 3 o’clock. I did have to adjust them slightly down to match factory cutoff height.
Mine are great! If you line up your truck to a white background you can make sure the lights aren't too high, if so it's probably not in there right. No flashes here.
Many LED headlight upgrades are not DOT compliant thus not legal in many states plus many leds are installed incorrectly blinding drivers on the road. To me the difference in lighting is not worth it.
You do realize that you're not the only driver on the road right? Install super bright lights somewhere else, don't replace your regular driving lights with them
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
Having trouble removing the cap for the low beam, any tips?
I like it, look so much better, the low beam seems well define.
I agree it looks way better!
Real tight for large hands. Just got them installed today. Low high and switchbacks
Yeah, if you have big hands, you might’ve gotten a couple cuts lol
I’m doomed. Just ordered the entire set for the cyber Monday deal. Ive got massive hands so im gonna be screaming obscenities for the better half of an afternoon.
Yeah, those areas are very tight lol
@@JT4X4OFFROADING I did lol
Will you be replacing the rear turn signal and brake lights? I want to do those two but having trouble finding out what bulbs I need
Yes and I’ll find out what bulbs they are
Lasfit makes these I just ordered
The for my 2023 Z71. Red for brake and amber for signal
7443 7444 Red CanBus LED Bulbs Turn Signal Brake Tail Lights | Error Free Anti Hyper Flash, T3 Series Upgraded Version
@@stephenmarando8850 I do like the amber lights too
Is there a difference between the LA PLUS and the LC PLUS lights. On the website it shows the LA PLUS H11 dont fit.
Yes wattage and lumens, LAPlus pulls more watts but is also brighter
So, I put in the same kit on my 2023 Colorado Trail Boss you did using your part numbers. Did you have any problems fitting the dust cover back on the low beam? My covers don't seem to wanna fit? Looks as if they are too shallow to fit the fan.
No, but I will tell you I had to play with it a little bit, you have to talk the wires and move things around with your hand, and it will go back on with a little bit of finesse
For the love of God my dust covers can’t go on properly. Fan is to big. I got them on by they are not fitted 100%. Maybe like 80% or the way. Spent two hours on something that should have taken 25 mins tops.
I only ended up putting in the high beams because they were not feeling solid. The o-rings don't seem thick enough and I'm going to contact Lasfit support. Are you able to make the bulbs move by merely touching them? Used LAplus 9005
No, mine are a pretty solid fit, and I got the caps back in afterwards as well. It could just be the positioning was off or they didn’t clip in properly.
Great video. Have you noticed loud noises coming from the dashboard when turning the car off and on? Specifically when using the Heating and A/C?
no, nothing too crazy, it does make a series of clicks when you shut the truck off, but that is completely normal. Other than that, I haven’t heard any noise as well. The truck is running or anything.
Hey bud! Thank you for the cool video on the install of these! Super helpful and appreciated. I know you don’t have the stock fog lights like on the z71, but was wondering if you knew which Lasfit led would work on a 2023 z71 with them? Thanks!
I’m not actually sure which one works with the Z71 but I know you can message them on Instagram and they’re very responsive.
Love these lights, however my drivers side now has condensation. I’ve taken the bulbs out and put them back in. I can’t figure out where the issue is. Maybe the cover on the back is the issue?? Not sure.
I haven’t had any issues with condensation so it could possibly be the covers in the back
Got these installed, so far no flashing from others, except a few hot chicks😂 loving my Sand Dune metallic 😊
Nice!!i gat yelled at a little lmao but whatever haha other LED are just as bright
So I just got these. I was just barely able to get my hands on to wiggle these high beams out... But I could not twist them back in. Had to sorta shimmy some pliers down there and slowly work it around. 🤦
Yeah it’s tough Chevy made those caps hard to get on
These Things Are So Fun…Thanks For The Updates.. 👍🏾
Glad you like them! Thank you !!
Great vid Pare! Salamat
Nice video. I just bought a 2024 colorado and was thinking about getting led headlight bulbs. Is it pretty easy to install.
You will love them, after install adjust headlight position lower. The install is medium only because it’s tight.
Do they not need to be aligned or whatnot
Not necessarily aligned, but the beams need to be adjusted down
@ ok how do you do that?
Is the T3-7443R the correct light for the Taillights ???
Only do reverse lights, the break lights have an issue where they do not light up while lights are on
Were you able to reinstall the large plastic cap after installing the low beams? I tried one brand of LED bulbs and the fan unit was too large and I couldn't screw the large cap back on.
Yes it goes back on perfectly! Just make sure the wires are all tucked in and you are good to go!
Does it matter if the light is up or sideways? As long as it locks in place?
There is a proper position, I would double check their website, I believe it has to be vertical
Travis, thank you for the Colorado videos. I have a very similar Trail Boss and have found the videos very useful.
Quick question, were your high beam Lasfit LEDs somewhat loose when installed in the housing? I’m not sure if maybe I turned too hard but both of my high beams are snug, but can move. The white bracket that secures in the housing appears to be loose from the bulb/fan, secured only by o-rings, so mine jiggle a bit, but it’s not noticeable while driving. Also, not sure how I’ll ever get those brackets out if need be (the bulb slips out from the bracket), but we’ll cross that bridge if we get there.
My lights are pretty snug, slight movement is probably acceptable but not much since you don’t want the lights jumping around while driving
I have this same issue when I installed last night. This just seems like a terrible design and there is way to much slop on the bulb when installed. I will be sending these back
How do you get the low beams to lock into place? I can only seem to turn the bulb.. can't get it locked in!
There is a locking ring, they are a little tricky.
Yeah, I see the locking ring I just can't get it to turn into place. I'm breaking my fingers here haha
@@iBxUnrATEdx1 I had to mess around with mine, push the wires inside into the side and then try to secure that locking cap, it’s the wires that are getting in your way
@JT4x4offroading - Just added these (high and low beams) no real issues on install... But now the real question - I'm now seeing that there is a possible issue with VA State inspection... apparently the LAZFIT high and low beam LEDs are not DOT? You're in VA, have you passed the state inspection with these?
Passed inspection Everytime
@@JT4X4OFFROADING Thanks - I have till next May before it needs an inspection.
Travis, I bought the amber corner lights from lasfit and i can’t seem to find how to get into the headlight themselves. Have you looked into them or no?
I actually have not replaced the Amber corner lights, I would have to look at how to get to them, they are very small, so it might require pulling the light fixture. Just a thought, not 100%.
They go inside the headlights. Meaning inside the cap you take off. You need to remove the entire headlight fixtures.
@@tango2544 if that’s the case, probably not worth it huh? Too much work for such a little light, what do you think?
Hey Travis, will it get too hot in there with the black cap on.? Just testing the lights, they felt pretty warm. I did put mine back on though…
No, the LED lights have a fan in order to keep them cool. I’ve had zero issues with mine.
Never leave the dust cap off, once any particles make it to the inside of the lens you’re done.
thanks for the video I just bought a 24 and it came with led fog lights but ugly halogen headlights.
Crazy they keep adding halogen !
I want led on my colorado wt 2023 but not this bright, is there another option?
I don’t believe there’s a less bright option, yeah, these are pretty bright check out lasfit they may have a less bright option
Travis because you did the switch back swap, is that why you don’t have the amber lights on at night with this new led low beam?
Exactly, they are LED instead of amber now
Hey Travis, asked these same questions on another technician I sub to, his installation was with the AUXILAM LED kit, but see you opted for LASFIT. With the TB's Auto/On/Off feature of the truck, do you see the light flicker? Typically I see this when im at a light or a stop, the engine cuts and then when it re-starts the light pulses. Concerned with confusing drivers on the other side, would love to hear your testimony with the LASFIT product.
Their support team said their lights have something built in to prevent this but want to hear from others before I purchase another light kit again.
it’s perfectly normal for your light to pulsate when the auto start stop feature is enabled, when it restarts the engine, it sends power from the battery to the starter, which makes your electronics power up and will cause an surge for all headlights, LED and non LED.
You should see them pulse slightly upon start up. While it's running you shouldn't see any sort of flicker.
same issue here, it just annoys me too much when i see my low beams flicker then the auto on/off kicks in, do these LASTFIT brand headlights do the same?
Do you think this will cause any issues with warranty?
No, it has to directly be the cause of an issue. If something did happen, which I dkubt it ever will just keep the old lights and switch it out. I have used LEDs for years and it's never caused any issues. LEDs use less power than halogens.
@@JT4X4OFFROADING Thanks for the input man, I’m gonna order these. Seems pretty straight forward and not too difficult for what you get.
looking good. i got the switchbacks you got but they do not work in the z71 . found out that the trailboss has a duel function turn sig and the z71 is only a single . really crappy of gm. but then again th trial dose not have hte daytime running stripe but it would be nice to have the daytime go all the way to the grill.
Ya if you have any electric issue you have to put in the orginal bulbs for GM to make any cases. Dealership told me that as well when i had the truck info the radio update. even tho the lcd take about 30% less voltage on top of that@@braydonbriggs9066
I tried and tried and couldn't get that cap off.
Push in and turn, it Has to unseal the gasket
Same here no matter what won’t come off
Thanks for that bit of info. I did the high beams switchbacks, and reverse but could not get that cover off.
Cover turns to your left of the truck. Lefty loosy, righty tighty.
Bit of a pain but definitely comes off if you put pressure and kinda let it turn like the video says😊
I struggled with it too on the first one. They don’t even need to turn a quarter turn. It will feel like they should turn more but are stuck, but that may be the gasket holds tight. You may need to use a flat m head screwdriver to gently pop the caps off.
Just installed mine today, how have they been running for you so far?
No issues at all!
SO I installed these last night, The high beam mounting design is terrible. The only thing holding them in is a silicone O ring. Have you hade any bulb movement since you installed?
no bulb movement for me and I’ve also adjusted my light beams almost to the lowest point
Hey man, you think you could tell me and or maybe do a short on how far the drivers seat reclines? I cant seem to find anything on that in any reviews. I shol like my lunch break naps at times lol
😂
Amazon links to lights does not work
Thank you, I will follow up when corrected!
I also installed these lights, at night people keep flashing their brights at me because they’re so bright!
Don't you think that might be a problem?
@@coltonwood9846could be
Then it’s not installed right. Have these same bulbs and never get flashed. Make sure the chips are facing 9 and 3 o’clock. I did have to adjust them slightly down to match factory cutoff height.
I was going to say the same thing! especially in a halogen not projector headlight! make sure theyre at 9 and 3 and adjusted lower@@Josh.Davidson
Mine are great! If you line up your truck to a white background you can make sure the lights aren't too high, if so it's probably not in there right. No flashes here.
Many LED headlight upgrades are not DOT compliant thus not legal in many states plus many leds are installed incorrectly blinding drivers on the road. To me the difference in lighting is not worth it.
Projection lights are not available and I adjusted beams down to avoid those blinding lights
How did you adjust them to be lower, I put these bulbs into my Colorado Trailboss and people keep highbeaming me 😂@JT4X4OFFROADING
Instead of pnp led’s try the H11 to H9 halogen conversion, way better. Halogen lights are made for halogen bulbs, the optics aren’t designed for led.
You do realize that you're not the only driver on the road right? Install super bright lights somewhere else, don't replace your regular driving lights with them
No way! Thanks for the super advice!
Hoe does a cock taste like
Why did you even come to this video
Nice car. Hello Mr. & Mrs. Darlings.