DIY How To Install Toyota Sun Visor

Поділитися
Вставка
  • Опубліковано 5 гру 2016
  • Step by step showing how to take down and install Toyota Camry sun visor.
    Toyota Camry 2008 sun visor gave way. Fixed by myself. Saved $90-$160. • DIY Camry Sun Visor Re...
  • Наука та технологія

КОМЕНТАРІ • 183

  • @LordHotcakes
    @LordHotcakes 4 роки тому +120

    This video is fantastic. Short, simple. No stupid narration or drawn out explanation. Absolutely perfect. Thank you, kind man.

    • @peterlution
      @peterlution  4 роки тому +4

      Neutered Chimp Thank you for your kind feedback. Cheers!

    • @rizzlerrickio
      @rizzlerrickio 8 місяців тому

      Love this

  • @danmills7858
    @danmills7858 2 роки тому +28

    A perfect demonstration video! Clear line of sight, zero blabber, solicitation or useless information. Straight, to the point, and worthy of Praise! Thank You!

  • @gmwilliams4314
    @gmwilliams4314 4 роки тому +12

    My long time Trusted Mechanic just charged me $130.00 (Part/Labor) to remove and replace my sun visor.
    This is the 4th time I have had to replace that visor. I have no idea why they keep breaking. 2 of them broke when the car was brand new and under warranty?
    I really appreciate you posting this step by step video. Thanks!

  • @RadiumRemix
    @RadiumRemix 2 роки тому +10

    Insane that content like this is free to watch. GOOD AND QUICK TO THE POINT. Love it. Thank you so much for this.

  • @Elle-rx3tw
    @Elle-rx3tw 6 років тому +34

    Thank you for the information in 2 minutes. Simple. Straightforward. Honest. Again, thank you.

  • @kenforu1531
    @kenforu1531 6 місяців тому +2

    Thank you sir. No stupid stuff or music.

  • @timothypanell3774
    @timothypanell3774 2 роки тому +4

    Thanks for posting.. Outside cap did not pop off easily for me as in this video so I just ripped it off with a pair of pliers. New assembly came with all the new covers and clips anyway so no harm done, worked perfectly!

  • @hiker5me
    @hiker5me 2 роки тому +1

    Thank you for the crystal clear directions on how to install the sun visor. The new clips didn't fit so we had to use the old clips and then it went in.

  • @holleymother9026
    @holleymother9026 2 роки тому +2

    So good you did this properly. Another video shows the mechanic swinging the visor out and pulling down really hard to yank the entire Assembly out . I would assume this could break or warp the part still in the roof. This shows what the rather confusing directions that came with the replacement tried to. Thank you.

    • @peterlution
      @peterlution  2 роки тому

      Thanks for your comments.

    • @vincentseidle954
      @vincentseidle954 Рік тому

      Yeah I followed those directions and it caused some bending of the roof portion so I had to re bend back into a good spot for thr visor to stay on. Wish I saw this video first

  • @robertroyston2874
    @robertroyston2874 2 роки тому

    This video saved me $100 at the dealership. This is a very simple fix with a $28 visor from Amazon.

  • @shazam6274
    @shazam6274 4 роки тому +2

    I just did this on my 2012 Scion Xb, which looks just like the video (probably because it shares a lot with the Camry, including the engine and drive train). I found a new Toyota part for $ 55 on eBay from a Toyota dealer selling off old inventory. I could not figure out how it worked to remove or to replace it. Thanks to your great video, it took about 20 seconds to remove the old one and pop in thenew on. Thank you very much.
    PS the dealer, who would have charged me ~ $ 200 installed, suggested I find one on ebay.

  • @a_sea_oasis
    @a_sea_oasis Рік тому +1

    Thanks so much for your sharing of installing the sun visor in my Toyota Camry 2010. Your instruction with the filming was super clear. My anxiety is gone (fear of breaking the sun visor).
    🙏
    Greetings from California 🇺🇸

    • @peterlution
      @peterlution  Рік тому

      Thanks for the warm feedback. Cheers!

    • @a_sea_oasis
      @a_sea_oasis Рік тому

      @@peterlution It was really smooth in removing the old sun visor. I watched you video 3 times 😀 However my arthritis hands gave me problem in installing the new replacement sun visor. Luckily my young and strong neighbor helped me to snap it in place less than 2 minutes 👍
      Thank you 🙏 💕 California 🇺🇸

  • @llmomma1969
    @llmomma1969 2 роки тому +3

    Thank you SO much for this video! I was able to replace both my sun visors with your easy guidance! 👏🏾👏🏾👏🏾

  • @DeadlyInsite
    @DeadlyInsite 5 років тому +3

    Really good video! Thank you! Short to the point, no annoying fluff : )

  • @tforties
    @tforties 3 роки тому +12

    Great video! One small suggestion: Before putting on the plastic cap (final step) stick a screwdriver in the hole between the spring clips and make sure the spring clips are spread as wide as possible. Otherwise, pushing in the plastic cap/cover may "unseat" the spring clips and push them in. These clips are really hard to dig out of the hole if that happens!

  • @miketaris5404
    @miketaris5404 2 роки тому +2

    This was so awesome, after watching this video I was literally able to replace my sun-visor in under a minute. thanks for sharing!!

    • @peterlution
      @peterlution  2 роки тому

      Thanks for the warm feedback. Cheers!

  • @tarnireynolds8778
    @tarnireynolds8778 5 років тому +2

    Thanks worked a treat with a couple used ones from the wreckers Cheers

  • @Sandman35739
    @Sandman35739 5 років тому +11

    Great video. Helped me do the job quickly and efficiently. Ended up having to use the old clips though because the new ones that came with the replacement visor wouldn't hold it place properly.

    • @sherriross5332
      @sherriross5332 4 роки тому

      Same I ordered a new one also and it came with the wrong clips glad I saved the old ones.

    • @gordongordonplex9455
      @gordongordonplex9455 2 роки тому +1

      @@sherriross5332 Always save the old parts, even if you know they're no good, worn out, etc. They still have dimensions for example.

    • @hiker5me
      @hiker5me 2 роки тому

      Great video! We had to use the old clips too!

    • @miguelacastaneda3101
      @miguelacastaneda3101 2 роки тому

      The old clips worked for us as well. Thanks for your comment!

  • @farson69
    @farson69 4 роки тому +1

    Man, those are some satisfying clicks

  • @ez76ify
    @ez76ify 2 роки тому

    Video was straight to the point. I was able to install in no time at all

  • @lawrencebeebee6840
    @lawrencebeebee6840 6 років тому +3

    Perfect my 2013 venza has the exact problem. Thanks for the fix ;-)

  • @neuFuture
    @neuFuture 5 років тому +1

    Great videos. They should all be this good!

  • @robertguzman3282
    @robertguzman3282 9 місяців тому +1

    Thanks for the video all other videos I watched weren’t Toyota Tacoma sun visor

    • @peterlution
      @peterlution  9 місяців тому +1

      Thanks for your positive feedback!

  • @jerrys7971
    @jerrys7971 2 роки тому

    Perfect "HOW TO" video, after watching it a couple times I changed out the sunvisor in less than 2 minutes! Thak you very much

    • @peterlution
      @peterlution  2 роки тому

      Thanks for your great feedback.🙏🙏

  • @johnnyevelyn1
    @johnnyevelyn1 3 роки тому +1

    this is the video that actually helped me install my toyota 2012 passenger side visor! yay! thank you thank you thank you!

  • @geralynpalacol9295
    @geralynpalacol9295 3 роки тому +1

    WOW, you’re a GENIUS!!! THANK YOU SOOOOO MUCH🙏🙏🙏. Changing mine now😍

  • @michaelelder9821
    @michaelelder9821 5 років тому +5

    perfect. short and exactly what's needed. thank you!

  • @Tigerman1138
    @Tigerman1138 2 роки тому

    Thanks! Used it today. The cover was VERY stubborn on the sun windshield. 2007 Camry. Clips rusted. Brand new on in now. Thanks.

  • @ilovecornell
    @ilovecornell Рік тому

    Omg, thank you! Best video I’ve seen by far! You actually showed how those clips go in 😅 thank you!!!

  • @johncarruthers5301
    @johncarruthers5301 3 роки тому

    Great video, it came off exactly as you demonstrated, thanks

  • @bmwat3390
    @bmwat3390 6 років тому +1

    Easy to follow , straight up instructions. Can't go wrong. Take your time. For me, separating the cover piece took the longest (if you will). Did not want the screwdriver gouging the headliner. The genuine Toyota replacement drivers side visor for my 09 RAV4 included all the parts and was a total drop in. $65 on eBay. Just enter your year and model + driver side sun visor in the search bar.

    • @peterlution
      @peterlution  6 років тому

      Thank you!! Yes, if you can buy one cheap, still save a bunch for installing by dealership. Cheers!

    • @navi_exl
      @navi_exl 5 років тому

      bm wat mine was 45$ for my 2010 Toyota Camry LE that is suppose to be coming since my drivers side broke. My mom was rough on the visor when she drove it and been broke since then

  • @navi_exl
    @navi_exl 5 років тому

    Thank you for making this video because my 2010 Toyota Camry LE 2.5L needs a new drivers side visor. It broke so I need to replace it. The clips and stuff work I just need the new visor because the side piece that goes to the roof of the car that holds the visor going straight across broke so I have a new one coming in and I’m going to replace it hopefully tomorrow and update everyone!! And my mom was rough on the visor with the drivers side when she drove it before me and had been broken since then and I only paid $45 for it

  • @Jtreble7
    @Jtreble7 7 місяців тому

    Very quick and simple thank you

  • @squatrx
    @squatrx Рік тому

    This is great - thank you. I have to wonder why so many people need to replace these however... We have a 2009 and the sun visor just decided to quit one day...

    • @peterlution
      @peterlution  Рік тому +1

      Thanks for your feedback. You are lucky it held up for 13 years. Mine quit less than 4 years. Many people had similar problem while Toyota had not admitted it was a 🍋, until many years later.😰

  • @PhillipeStLeger
    @PhillipeStLeger 3 місяці тому +1

    This helped me out a lot. Thank you!

    • @peterlution
      @peterlution  3 місяці тому

      You are welcome. I am glad that i helps.

  • @marciamoss3431
    @marciamoss3431 2 роки тому

    Thank you for this video. It helped me replace my broken visor

    • @peterlution
      @peterlution  2 роки тому

      I am glad it helped. Thanks for the feedback.

  • @syedmuhammadaliraza7602
    @syedmuhammadaliraza7602 Рік тому

    Thank you brother for your video, it helped me fix my car's visor 💝

  • @mauriaj179
    @mauriaj179 7 років тому +1

    This was super helpful. Thanks!

    • @peterlution
      @peterlution  7 років тому

      I am glad that helped. Cheers!

  • @joeb.8213
    @joeb.8213 2 роки тому

    Thanks for posting this. I just replaced mine with the help of this video. Much appreciated!

    • @peterlution
      @peterlution  2 роки тому

      Glad to hear your success! Cheers!

  • @Mrchristopherhays
    @Mrchristopherhays 5 років тому +1

    Thank you. Very helpful and efficiently done.

    • @peterlution
      @peterlution  5 років тому

      Thank you for your feedback. Cheers!

  • @delciagarcia8287
    @delciagarcia8287 2 роки тому

    Thank you so much!!!! Straight to the point. 🙏

  • @lw235
    @lw235 6 років тому +2

    Thank you for posting this video...it saved the day. The 3rd party visor that I ordered fit but had different spring-clips that did not work, so I used the old springs and spring expander on the new visor and it worked great. The difference in the springs are... the small two finger grippers on the side of each spring that faces out. If you use the old springs you must use the old spring expander too. I paid 49$ for the new visor (it's a 5 minute job) and the dealer wanted $140 to install a new one.

    • @peterlution
      @peterlution  6 років тому

      I am glad that you did it! Hooray!!

    • @jerryshapiro3402
      @jerryshapiro3402 Рік тому

      The prongs that came with the new visor fall out of the hole in the ceiling. I am trying to find a visor, new or used that has the same type of prongs as were used with the original visorr.

  • @kclyt07
    @kclyt07 5 місяців тому

    Very thorough!!! Excellent!

    • @peterlution
      @peterlution  5 місяців тому

      Glad you enjoyed it. Thanks for such a positive feedback.

  • @colleenstewart5961
    @colleenstewart5961 2 роки тому +1

    great video!

  • @lukefluke5182
    @lukefluke5182 3 роки тому

    Thank you, this helped me a lot today!

    • @peterlution
      @peterlution  3 роки тому

      You are welcome. I am glad that it helped.🙏🙏

  • @kimthuctran6579
    @kimthuctran6579 9 місяців тому +1

    Thank you. This is very helpful

    • @peterlution
      @peterlution  9 місяців тому

      Thanks for your positive feedback.

  • @craterface12
    @craterface12 2 роки тому +12

    For anyone that is struggling, when you put in the metal prongs in without the cover, the visor will fall out of the hole. You have to hold the visor in place with the prongs in the hole, then put the cover on all the way while holding the visor to then secure it and make sure that it does not fall out.

    • @chrismceachin5762
      @chrismceachin5762 Рік тому +3

      Thank you, I felt like an idiot for about 15mins

    • @bakerboyboyboy
      @bakerboyboyboy Рік тому

      Still loose. Prongs fall out. Are the covers poles supposed to secure the prongs in place somehow?

    • @craterface12
      @craterface12 Рік тому +1

      @@bakerboyboyboy it's been a while, but going off of memory, the cover is vital to keeping the visor in place, so yes

    • @bakerboyboyboy
      @bakerboyboyboy Рік тому

      @@craterface12 Success. I really had to use all my might to press that cover into place.

  • @Family4china
    @Family4china 2 роки тому +1

    Thanks so much! So easy and method worked great!

    • @peterlution
      @peterlution  2 роки тому

      Thanks for your feedback!🙏🙏

  • @stevencarlson3691
    @stevencarlson3691 6 років тому +1

    Thanks man I'm going to have to do this. My nephew broke my visor and it kept falling in my face. So i finished what he started and ripped it off and now my car has a grounding issue.

  • @t4rgirl
    @t4rgirl Рік тому

    THIS IS THE BEST VIDEO EVER!!!!!!!!!!!!!!!

    • @peterlution
      @peterlution  Рік тому

      Thanks for your great feedback!🙏🙏

  • @lilymarcelle6521
    @lilymarcelle6521 2 роки тому +1

    Thank you for the video! Great help!

    • @peterlution
      @peterlution  2 роки тому +1

      Thanks for the warm feedback!🙏🙏

  • @deenugent473
    @deenugent473 9 місяців тому +1

    Thanks brother!

  • @AshlandIT
    @AshlandIT 5 років тому +1

    Life saver! Thank you for this video!

  • @karieanne25
    @karieanne25 3 роки тому

    That was excellent. Thank you!

  • @ronronflorvil9093
    @ronronflorvil9093 Рік тому

    Thank you god bless you guys with so much you help us

  • @vcourchene1
    @vcourchene1 7 років тому +1

    Thanks it turned out I bought the wrong visor even though my Camry doesn't have a sunroof :/ - (the correct one was under the description of sunroof). I waited too long to be able to return the incorrect one, but until I get the one with the wiring for the light, the one without kind of works. I still probably spent less than I would have if I went to a mechanic or dealership, so that's alright. Live and learn.

    • @peterlution
      @peterlution  7 років тому

      Live and learn. Yes, we all do! :-)

  • @benplayseverything
    @benplayseverything 2 роки тому

    Some Toyotas like the Yaris have a clip that has arms sticking out. To install you have to put the clips into the base at an angle. The clips will be pointing towards each other, like the eiffel tower, halfway seated. This way the arms can hook into the ceiling when you install the base. If they are installed flat, then no amount of banging on the base will push the arms to hook in. There has to be clearance in the ceiling hole for the arms to fit through.
    After that you hold the base in place, also you can clip the visor into the holder, and you use your screwdriver to carefully poke into the clips and turn so that they spread out fully and they're no longer tilted. Then holding everything in place and not letting the clips move, pop in the cover.
    Good luck this one took hours to figure out. I guess that's why a mechanic charges money to install.

  • @dukec88
    @dukec88 3 роки тому +1

    Great video, thank you so much!

    • @peterlution
      @peterlution  2 роки тому

      Thanks for the warm feedback! 🙏🙏

  • @MatthewChellaDC
    @MatthewChellaDC 5 років тому

    Great help. Thanks

  • @dollarthrifted3637
    @dollarthrifted3637 3 роки тому

    Thank you for this useful video 🙂

  • @BarryObaminable
    @BarryObaminable 3 роки тому

    you are the man.
    many thanks

  • @couesaz8692
    @couesaz8692 Рік тому

    Thank you!!👍🏼💯😎

  • @mery.999
    @mery.999 4 роки тому +1

    Thanks, helpful video 🔝

  • @marcbee1234
    @marcbee1234 9 місяців тому +1

    THE BEST !!!

  • @BobJacobson
    @BobJacobson 6 років тому +2

    My replacement, ordered on Amazon for 2/3 the dealer price, came with all the parts mentioned, including the metal clips. Unfortunately, the clips did not fit and forcing them would damage the internal roof part where they were supposed to easily fit in. I instead had to reinstall the original clips, remove the new ones, and give that a try. No way, the hub is different. Live and learn.

    • @hiker5me
      @hiker5me 2 роки тому +1

      We had to use the old clips too! So appreciate you mentioning to do that!

  • @CLeAnQUaRTeRz
    @CLeAnQUaRTeRz 2 роки тому +1

    Thank you for your video 😬

    • @peterlution
      @peterlution  2 роки тому

      Thanks for you feedback. Cheers!

  • @wahidqymz2735
    @wahidqymz2735 4 роки тому +1

    شغل ميه ميه

  • @phanalai
    @phanalai 3 роки тому

    I was able to replace the driver visor with no problem. I ordered the replacement for the passenger side and thought it would as simple to replace and it was not. I could not get the clips to catch. What am I doing wrong on the passenger side? I tried hammering it. I lost 2 clips in the ceiling. Please help. Thank you.

  • @justcurious7779
    @justcurious7779 3 місяці тому

    Thank you sir!

  • @frankrenville3460
    @frankrenville3460 Рік тому

    Thank you for you help

  • @billysmith1493
    @billysmith1493 2 роки тому

    Thankyou , I SAVE

  • @kmalerich
    @kmalerich 24 дні тому

    Info note. You must have the trim piece on the visor for the metal spring tabs to stay put when you install the new visor. The trim piece tabs hold the spring tabs in their hole in the visor mount. If you try to install the visor and then the trim piece the visor will not stay attached to the roof.

  • @DontLeaveMeLucile
    @DontLeaveMeLucile 4 роки тому

    I need the thing that holds it on the other side though. What Is that called and where do I buy it?

  • @mikebelfield76
    @mikebelfield76 Місяць тому

    Thank you very clear

    • @peterlution
      @peterlution  Місяць тому

      Thanks for your positive feedback

  • @cdaniels9289
    @cdaniels9289 6 років тому +1

    Awesome thank you.

  • @Fonziegump
    @Fonziegump 3 роки тому

    Thank you!

  • @user-ii3nb3fk7f
    @user-ii3nb3fk7f 4 місяці тому

    Muchísimas gracias me fue de gran ayuda!!

    • @peterlution
      @peterlution  4 місяці тому

      ¡De nada! Estoy encantado de haber podido ayudarte.

  • @pancholopez8829
    @pancholopez8829 3 роки тому

    Thanks. I need to replace both of mine.

  • @normedwards5305
    @normedwards5305 Рік тому

    Wow! Thats it? I'm heading out to my truck!

  • @rcmallory
    @rcmallory 6 років тому +6

    Wow, completely replaces in less than 2 minutes. I'm headed for the dealer, I bet he'll want $250 to do that

    • @peterlution
      @peterlution  6 років тому

      Hooray!

    • @ajlee945
      @ajlee945 6 років тому +2

      It was $50 each at dealer so I just left LOL

    • @peterlution
      @peterlution  6 років тому +1

      Good call! ;-)

    • @AshlandIT
      @AshlandIT 5 років тому

      I paid the $70. I don't have time to mess with finding another. Flopping down in my face was impossible to tolerate.

    • @Wylkus42
      @Wylkus42 5 років тому

      The part is like fifty bucks.

  • @ferlatino33
    @ferlatino33 7 місяців тому +1

    Thank you

    • @peterlution
      @peterlution  7 місяців тому

      You are welcome. It's my pleasure to share my experience and feedback to the society.

  • @adriandavidpayne
    @adriandavidpayne 6 років тому +1

    Thank You

  • @Acejunior7
    @Acejunior7 Рік тому

    After this has popped off several times I am inclined to think that two screws through a metal arm into a metal fitting (as on a 1978 Eldorado) is a much better set up for a sun visor. 👴

  • @MrYisraela
    @MrYisraela Рік тому

    thanks!!!

  • @mtgr2223
    @mtgr2223 3 роки тому +1

    أحسنت.

  • @suny2239
    @suny2239 5 років тому

    hello Is this a genuine OEM part which is very pricey? I saw one on Amazon and was seeing if that would work or if it would be difficult to install...dealer wants $160.00

    • @peterlution
      @peterlution  5 років тому

      OEM will be good, Or you may find some parts in crashed cars in junk yard. Sometimes they let you uninstall some parts without charge. Installation is easy.

  • @TheJAWS007
    @TheJAWS007 6 років тому

    My Toyota visor is loose.
    It keeps on dropping down. How can I fix that?

    • @peterlution
      @peterlution  6 років тому

      Please see my other video. ua-cam.com/video/yvPxParKy9w/v-deo.html

  • @z3m0s
    @z3m0s 4 роки тому

    What're those clips called? I ordered the part and it didn't come with them, mines missing so I have no other parts to pick from.

    • @peterlution
      @peterlution  4 роки тому

      I don't know the official name of those clips. If I were you, I would go to used auto part store (junk yard) to look for them. Camry is a very popular car, you can find some small parts from junk yards. Some times the owner will let you find them by yourself and take some for free. I got a cigarette lighter from a junkyard near by. Hope this helps.

    • @z3m0s
      @z3m0s 4 роки тому

      @@peterlution Thanks very much, I'll find something in my area.

  • @joessepirangel7744
    @joessepirangel7744 4 роки тому

    Were can u get a sun visor for a avalon maane there hard to find

    • @peterlution
      @peterlution  4 роки тому

      Not sure about Avalon. You may find some old parts from "Used Auto Part Store" (automobile grave, or junk yard).

  • @MasterArmedforces
    @MasterArmedforces 5 років тому

    Arent sun visors universal, for the most part?

  • @lawbuff824
    @lawbuff824 4 роки тому

    where did you purchase the actual part??

    • @peterlution
      @peterlution  4 роки тому

      I did not buy a new one. I fixed the old. Please see my other video ua-cam.com/video/yvPxParKy9w/v-deo.html

  • @t0nysilver.
    @t0nysilver. 3 роки тому +1

    Unintentional ASMR

    • @peterlution
      @peterlution  3 роки тому +1

      LOL! I knew nothing about ASMR...until today. That was really unintentional. :-D

  • @jerrys7971
    @jerrys7971 2 роки тому

    BTW - go to the local auto graveyard, I got a visor for $20, too 2 phone calls to locate the right match, too easy

  • @dst7ssa
    @dst7ssa 7 років тому

    Where did you buy the visor?

    • @peterlution
      @peterlution  7 років тому +1

      I did not buy the visor. I fixed it. If yours is beyond repaired, I would suggest you to go to a junk yard (Used Parts) to find one. Toyota Camry is very popular so you can find old parts from junk cars. Some junk yards even do not charge if you pick it up from the yard.

    • @dst7ssa
      @dst7ssa 7 років тому +1

      peterlution thanks

    • @shelleyjo2781
      @shelleyjo2781 6 років тому

      How did you fix it? Were the parts inside loose? Mine won't stay towards the windshield. Thanks.

    • @EdwoodCA
      @EdwoodCA 6 років тому

      Here's his other video showing his repair: ua-cam.com/video/yvPxParKy9w/v-deo.html

    • @anonymousgoogle9545
      @anonymousgoogle9545 2 роки тому

      @@EdwoodCA great video thank you sir

  • @spikedout13
    @spikedout13 5 років тому

    What color is that

    • @peterlution
      @peterlution  5 років тому

      Spikedout12&ZyKo_Loco I have forgotten what it was called. I call it light gray, but manufacturer might have their own fancy name.

    • @spikedout13
      @spikedout13 5 років тому

      Because I’m currently needing to replace both and it looks like the same color as yours

    • @spikedout13
      @spikedout13 5 років тому

      Stuck between a light beige or gray I don’t want to order the wrong color

    • @peterlution
      @peterlution  5 років тому

      @@spikedout13 I am sure it was light gray. Please watch my other video ua-cam.com/video/yvPxParKy9w/v-deo.html. Too bad I just traded my car last week and cannot take a look again.

  • @georgebezverhov1143
    @georgebezverhov1143 3 роки тому

    260K views
    Toyota : no it’s not a recall

    • @peterlution
      @peterlution  3 роки тому

      Actually, this is only a subsequent video. My original video, ua-cam.com/video/yvPxParKy9w/v-deo.html, has been viewed over 500K . Toyota only offered free repair if customer complaint for a few months, but stop short for a recall.

  • @CarlosAguirre-xt7pr
    @CarlosAguirre-xt7pr 3 роки тому

    Ps no amor por que te extraño tanto amor y amor no se como se hace la cosa

  • @shademe
    @shademe 2 роки тому

    Thanks for your video I wish mine were that easy I keep popping in the hole the son of a bitches

  • @fffff728
    @fffff728 4 роки тому

    بعد وش المقطع 😂بعدما كسرت الشماسه😭

  • @pog_nplaum
    @pog_nplaum 7 років тому

    can u fix mine for me? lol....

    • @peterlution
      @peterlution  7 років тому

      I will be glad to, if you are my neighbor. ;-)