I changed by first faucet the other week, looks much nicer as well as saving water. I got recommended a 2mil view video on the same topic after watching this... hoping you grab a portion of that audience ;)
Nice at least you guys are allowed to do plumbing…lol Yeah it’s a common issue so everyone’s looking for how to do it. I would be happy with half that view count…lol
@@LonghornWorkshop ...yeah... we are not really :P Even changing a tap is meant to be a licenced job in Australia. But unlike electrical, it is less enforced (though the taps all come with big warnings the warrenty is void if not installed by a plumber :P
Рік тому+1
Nice video for those who want to replace the bathtub faucet or similar. Thanks for the details. All the best. Big greetings.
Excellent, just make sure how it’s attached. Some of them have a set screw under the spout that you have to take off, others like this one are screwed on. The rest is easy…
@@robertzhang6391 make sure there isn’t a set screw underneath the spout holding it to to the pipe. Hopefully they don’t glue it on. Don’t force it else you may bend the pipe, best to ask a plumber.
@@edjolliffe2973 no need as in my case the water through the spout is controlled by the faucet above the spout. I didn’t show that in the video but that is a faucet above the spout that lets water through the spout once it’s turned on.
i found out that I have a plastic pipe when I removed my tub spout. I'm scared of the pipe breaking, but I do have to tighten the tub spout all the way until it stops turning right? I know this might be a dumb question, but I want to make sure I'm not messing something up by over tightening it. Also, when I turn on the water, everything is fine, until I pull the lever. The water comes out from the top, but every few minutes I see the water coming out from the far end of the spout. Closest to the wall. Is that normal?
I think this is the method to replace my spout with a broken diverter pin. The pipe coming from my wall is 4” PVC with 3/4” (?) thread. Will the new spout accommodate 1/2” or 3/4” threaded pipe? The new spout you have has the diverter at the front, but the spout in the link has it farther back?
@@mistergrendel32 I only have experience with copper pipes. I assume you mean it’s a pex pipe? Best to take what you have to Home Depot so you can get the same type of spout.
Could be, I used the same make Danco 5”. I had bought my spout from Home Depot so you may want to go to your local hardware store, take the one you have with you so they can give you the same size.
Not necessarily. In my case the opening was large and I had a gasket handy so I used it. I was just being extra cautious. You can ignore that tip, but if you have some putty it’s worth adding that while you are at it. To your question no the gasket does not come with the kit.
I have nearly the exact same set up. I noticed your did nothing with the spout. Is that for sure a threaded attachment? I tried to remove mine because the diverter leaks a bit during a shower but I did not want to torque it too much for fear of shearing the copper pipe to which it is attached. It is safe to add heat with either a torch or a heat gun to persuade the spout to screw off? The diverter works ok so I don't want to do anything drastic to damage the diverter if I cannot remove the spout.
Did you check underside of the spout to see if it has a set screw holding it onto the copper pipe. In my case it was a threaded spout. Could be it’s rusted tight so agreed be careful not to over torque as you could bend the copper pipe. Maybe some WD40 may help but honestly I would not use heat.
@@LonghornWorkshop Thanks for the advice. I may just leave it alone and if I get too fed up I will call a plumber. There is no set screw so it is definitely threaded unless there is another way in which these old style spouts are attached.
@@jennyvieve9108 I don’t but basically same process. The set screw will be underside of the spout and you just need to unscrew it using a screw driver to release the spout.
@@LonghornWorkshopso I should use putty and silicone to close up the gap between the pipe and the wall for a set screw spout installation? I read some comments on another post that says the acidity of silicone will eat away at the pipe. Is that true? Or is there a type of silicone that is safe for this application?
@@jennyvieve9108 the silicon would around the spout and the back wall, it does not go around the copper pipe. If you have a big gap around the copper pipe and the back wall then take a picture and take it to the local hardware store and ask the if the have anything to plug the gap, like a rubber gasket. Hope that helps
Mine has a notch at the bottom, but I'm unable to find a screw. Should I just go ahead with a multi-tool and cut-out a ring out of it so I can hopefully find it?
@@hkhatri12 a notch at the bottom allows for a set screw so that it holds onto the copper pipe. If you are sure there is no screw than my guess is it’s like the one I have where the spout is screws onto the copper pipe. You can gently try and turn the spout and see if it turns, but be careful not to bend the copper pipe inside in case they have used another method.
@@LonghornWorkshop Thanks for the reply. I'm just a little scared on turning it with force. This is a 40year old spout and I think the joint is corroded. I did find a method of heating the joint and then twisting it, but I really didn't want to buy a torch for a one-off event. Any other ideas?
@@hkhatri12 yeah heating it is a good option. Other than that maybe try and spray from wd40 and few times and leaving it for an hour and see if that loosens it up
No, you don't need to turn off any of the water supply to just replace the spout. You would only need to do that if you need to replace something like a cartridge. And even in that case, you would only need to turn off the water supply to the whole house if you can't find anywhere that specifically shuts off water to the bathtub.
I couldn't find any screws on my old spout, I even put my finger through the groove and I only felt the pipe with no screws around it. So I tried turning it counter clock wise to remove it but it wouldn't turn. What should I do? how do I force it to turn in order to remove and install the new one?
Every situation is different, from experience either there is a set screw under the spout that you have to take off first or the spout is just screwed on like in my case. It may be ceased up so may require a little more force however be careful as the copper pipe may bend it twist if you force it too much. Maybe spray some wd40 to see if it loosens up. Don’t really have v any other advice other than get a handy man to change it .
@@LonghornWorkshop There's an opening for a set screw but its empty, edges sharp, and goes straight to the copper inside. And I honestly feel like I've bent the copper pipe after much force :( Wish I had gotten to your comment before trying. I'll get some wd-40 but with the copper being bent I may need a plumber lol. Thank you so much for your response :) I'll keep trying and let you know
@@investorr7148 yeah that’s crazy hopefully whoever installed it didn’t glue it. I slight bent in the pipe is not a big deal especially for a tip spout. Good luck, would love to know what the issue was if you or a handyman do get it off.
@@moe3000 yes usually they will not provide a gasket. I just had one handy so I used it, i used it just as an extra safety to stop the water entering behind the spout. If your gap is not too larger you can just caulk it. You should always caulk where the spout meets the wall, as that’s the first line of defense.
@@youareworthy296 I believe it was part of a sink faucet kit. You don’t need a gasket like this but if you can find one at your local store that would be good. Or you can just make one out of a hard plastic and drill a hole through it, it’s just to cover up a large gap if you have one
Woodwork, electrical installation, plumbing, chicken-wrangling - is there no end to this man's talent? Cheers Harki.
Lol mate the wife keeps me busy
I changed by first faucet the other week, looks much nicer as well as saving water. I got recommended a 2mil view video on the same topic after watching this... hoping you grab a portion of that audience ;)
Nice at least you guys are allowed to do plumbing…lol
Yeah it’s a common issue so everyone’s looking for how to do it. I would be happy with half that view count…lol
@@LonghornWorkshop ...yeah... we are not really :P Even changing a tap is meant to be a licenced job in Australia. But unlike electrical, it is less enforced (though the taps all come with big warnings the warrenty is void if not installed by a plumber :P
Nice video for those who want to replace the bathtub faucet or similar. Thanks for the details. All the best. Big greetings.
Thanks Mehmet appreciate that
Great video, I'll be doing this over the weekend. Thanks!
Excellent, just make sure how it’s attached. Some of them have a set screw under the spout that you have to take off, others like this one are screwed on. The rest is easy…
Great job explaining the procedure 👍😎👍Thanks!
Thanks
Thank you very much. This helped a great deal.
I was able to replace my spout after watching this video.
@@martinguerra8912 that’s great feedback thanks!
Great video,I did the same work but I can’t remove the faucet anti clockwise by hand.😢I don’t know how should I do the next
@@robertzhang6391 make sure there isn’t a set screw underneath the spout holding it to to the pipe. Hopefully they don’t glue it on.
Don’t force it else you may bend the pipe, best to ask a plumber.
I’ll have to save this one for later. Great info!
Thanks for watching and the comment.
Thank you..., easy enough but more complex than I originally thought.
Thanks and taking of an existing spout is sometimes the hardest part.
@@LonghornWorkshopwhat do we do if it does nothing when turning it anti-clockwise to remove? Doesnt loosen or let up at all
Did you need to shut off the water first?
@@edjolliffe2973 no need as in my case the water through the spout is controlled by the faucet above the spout. I didn’t show that in the video but that is a faucet above the spout that lets water through the spout once it’s turned on.
Nicely done! Thanks!
Thank you
i found out that I have a plastic pipe when I removed my tub spout. I'm scared of the pipe breaking, but I do have to tighten the tub spout all the way until it stops turning right? I know this might be a dumb question, but I want to make sure I'm not messing something up by over tightening it.
Also, when I turn on the water, everything is fine, until I pull the lever. The water comes out from the top, but every few minutes I see the water coming out from the far end of the spout. Closest to the wall. Is that normal?
I think this is the method to replace my spout with a broken diverter pin. The pipe coming from my wall is 4” PVC
with 3/4” (?) thread. Will the new spout accommodate 1/2” or 3/4” threaded pipe?
The new spout you have has the diverter at the front, but the spout in the link has it farther back?
@@mistergrendel32 I only have experience with copper pipes. I assume you mean it’s a pex pipe? Best to take what you have to Home Depot so you can get the same type of spout.
Just did this, but when water is on, instead of leaking from the faucet end, is leaking from wall-bathtub faucet connection, how can I fix that?
Hard to tell, when you took the spout off and turned the water in did it come out clean from the copper pipe ?
The link you posted for the tub spout is not the same one you show in the video....
Could be, I used the same make Danco 5”. I had bought my spout from Home Depot so you may want to go to your local hardware store, take the one you have with you so they can give you the same size.
If you’re going to link the spout you use in a video, the link MUST be the actual spout you used in the repair. That’s a critical detail isn’t it?
Do I need to buy a gasket separate from the faucet kit to place over the plumbers putty?
Not necessarily. In my case the opening was large and I had a gasket handy so I used it. I was just being extra cautious.
You can ignore that tip, but if you have some putty it’s worth adding that while you are at it.
To your question no the gasket does not come with the kit.
Very helpful. .. thanks !
Thanks!!
I’m assuming you need to shut off the main water right? Thanks for the video!
No in my case I do not have to shut off the main. The spout is just a diverter, either feels the tub or diverts it to the shower head.
I have nearly the exact same set up. I noticed your did nothing with the spout. Is that for sure a threaded attachment? I tried to remove mine because the diverter leaks a bit during a shower but I did not want to torque it too much for fear of shearing the copper pipe to which it is attached. It is safe to add heat with either a torch or a heat gun to persuade the spout to screw off? The diverter works ok so I don't want to do anything drastic to damage the diverter if I cannot remove the spout.
Did you check underside of the spout to see if it has a set screw holding it onto the copper pipe. In my case it was a threaded spout.
Could be it’s rusted tight so agreed be careful not to over torque as you could bend the copper pipe. Maybe some WD40 may help but honestly I would not use heat.
@@LonghornWorkshop Thanks for the advice. I may just leave it alone and if I get too fed up I will call a plumber. There is no set screw so it is definitely threaded unless there is another way in which these old style spouts are attached.
Do you have a video for the other type of tub spout that uses a set screw?
@@jennyvieve9108 I don’t but basically same process. The set screw will be underside of the spout and you just need to unscrew it using a screw driver to release the spout.
@@LonghornWorkshopso I should use putty and silicone to close up the gap between the pipe and the wall for a set screw spout installation? I read some comments on another post that says the acidity of silicone will eat away at the pipe. Is that true? Or is there a type of silicone that is safe for this application?
@@jennyvieve9108 the silicon would around the spout and the back wall, it does not go around the copper pipe.
If you have a big gap around the copper pipe and the back wall then take a picture and take it to the local hardware store and ask the if the have anything to plug the gap, like a rubber gasket. Hope that helps
Thanks this is helpful @@LonghornWorkshop
Mine has a notch at the bottom, but I'm unable to find a screw. Should I just go ahead with a multi-tool and cut-out a ring out of it so I can hopefully find it?
@@hkhatri12 a notch at the bottom allows for a set screw so that it holds onto the copper pipe. If you are sure there is no screw than my guess is it’s like the one I have where the spout is screws onto the copper pipe. You can gently try and turn the spout and see if it turns, but be careful not to bend the copper pipe inside in case they have used another method.
@@LonghornWorkshop Thanks for the reply. I'm just a little scared on turning it with force. This is a 40year old spout and I think the joint is corroded. I did find a method of heating the joint and then twisting it, but I really didn't want to buy a torch for a one-off event. Any other ideas?
@@hkhatri12 yeah heating it is a good option. Other than that maybe try and spray from wd40 and few times and leaving it for an hour and see if that loosens it up
@@LonghornWorkshop ooh, that sounds like a promising idea!
I'll definitely try doing that.
GREAT video! Thank you!
Thanks
Do I need to turn off the water supply for the whole house to replace my tub spout?
No, you don't need to turn off any of the water supply to just replace the spout. You would only need to do that if you need to replace something like a cartridge. And even in that case, you would only need to turn off the water supply to the whole house if you can't find anywhere that specifically shuts off water to the bathtub.
Did you need to shut off the water?
No I didn’t need to turn off the water main. If you have a similar setup you just need to turn off the shower faucet that’s takes water to the spout.
Have just watched this and learned that some spouts are screw on. Solves my knowledge gap. Thanks!
@@sreq8733 glad it helped thanks
I couldn't find any screws on my old spout, I even put my finger through the groove and I only felt the pipe with no screws around it. So I tried turning it counter clock wise to remove it but it wouldn't turn.
What should I do? how do I force it to turn in order to remove and install the new one?
Every situation is different, from experience either there is a set screw under the spout that you have to take off first or the spout is just screwed on like in my case. It may be ceased up so may require a little more force however be careful as the copper pipe may bend it twist if you force it too much.
Maybe spray some wd40 to see if it loosens up. Don’t really have v any other advice other than get a handy man to change it .
@@LonghornWorkshop There's an opening for a set screw but its empty, edges sharp, and goes straight to the copper inside. And I honestly feel like I've bent the copper pipe after much force :( Wish I had gotten to your comment before trying. I'll get some wd-40 but with the copper being bent I may need a plumber lol. Thank you so much for your response :) I'll keep trying and let you know
@@investorr7148 yeah that’s crazy hopefully whoever installed it didn’t glue it. I slight bent in the pipe is not a big deal especially for a tip spout. Good luck, would love to know what the issue was if you or a handyman do get it off.
@@LonghornWorkshop Sounds good ^_^ I'll keep you in the know!!!!! Thanks a bunch and Happy Easter!!!!
@@investorr7148how’d you get it off? :D
Thank you ❤
@@AhJodie thanks
Mine didn't come the package with the larger black gasket . It was tiny black ring size gasket
@@moe3000 yes usually they will not provide a gasket. I just had one handy so I used it, i used it just as an extra safety to stop the water entering behind the spout.
If your gap is not too larger you can just caulk it.
You should always caulk where the spout meets the wall, as that’s the first line of defense.
Where did the gasket come from I know around tge house but what did it come with
@@youareworthy296 I believe it was part of a sink faucet kit. You don’t need a gasket like this but if you can find one at your local store that would be good. Or you can just make one out of a hard plastic and drill a hole through it, it’s just to cover up a large gap if you have one