Розмір відео: 1280 X 720853 X 480640 X 360
Показувати елементи керування програвачем
Автоматичне відтворення
Автоповтор
awesome thanks. how is that set up working for you so far. im thinking i may plug/cap one of the inlet/outlet of the reactor and make an inlet in the recirculating tubing to unsure water in is being incorporated into the tumble.
No need to do that. Just use the elbow included with the reactor to push feed flow over the recirculation intake.
hey im gonna make basicly the same set up.what you use to drill the holes a step bit
I used a Forster bit but I'm sure a step bit would work just fine. Just take your time when drilling so you don't crack the tube.
and did you use the 1200 pump i got some 3/4 inch fittings turns out the pump screws into 1/2 inch fittings stupid me. so did you use 3/4 or 1/2 pvc
1200 sounds right. I used 1/2" pvc and uniseals.
awesome thanks. how is that set up working for you so far. im thinking i may plug/cap one of the inlet/outlet of the reactor and make an inlet in the recirculating tubing to unsure water in is being incorporated into the tumble.
No need to do that. Just use the elbow included with the reactor to push feed flow over the recirculation intake.
hey im gonna make basicly the same set up.what you use to drill the holes a step bit
I used a Forster bit but I'm sure a step bit would work just fine. Just take your time when drilling so you don't crack the tube.
and did you use the 1200 pump i got some 3/4 inch fittings turns out the pump screws into 1/2 inch fittings stupid me. so did you use 3/4 or 1/2 pvc
1200 sounds right. I used 1/2" pvc and uniseals.