ZK-MT21 50W×2+100W Bluetooth 5.0 Amplifier Board

Поділитися
Вставка
  • Опубліковано 4 вер 2021
  • ZK-MT21 50W×2+100W Bluetooth 5.0 Amplifier Board
    Unboxing, connection and Testing]
    _____________________
    Online Buy link -
    ZK-MT21 50W×2+100W Bluetooth 5.0 amplifier board
    amzn.to/3h3JaPk
    24v 5A Power supply
    amzn.to/3bpleCQ
    8 inch speaker
    amzn.to/3xLpLba
    6 inch speaker
    amzn.to/3xYHU5p
    6.5 inch speaker
    amzn.to/2W7mmWV
    3 Inch speaker
    amzn.to/2Xuck2S
    24v 5A DC Power Supply amzn.to/3L0tDfv
    12v 10A DC Power supply amzn.to/3qkRHlu
    12v 5A DC Power supply amzn.to/3D5mdoE
    -------------------------
    Please like video and share
    Thanks for watching | Have a good day
    Please subscribe channel
    / @mrmistry
    Facebook Page - / mr-mistry-189455677393...
    ------------------------------------------
  • Наука та технологія

КОМЕНТАРІ • 101

  • @muff-waggle-b9408
    @muff-waggle-b9408 Рік тому +9

    I’ve used this lamp on several applications! Works awesome

  • @johnussss
    @johnussss 11 місяців тому +6

    Don't use this model on a 24v solar system that supplies the voltage same as in the batteries during charging, blew the living bejeezous out the the 24v 4700uf cap, had to replace it with a 120v one, the rest of the circuit is ok up to 30v, it clipped even when supplying it 12v until I replaced the cap, higher voltage = higher output on this unit ... live off-grid and getting enough volume out of either 5v or 12v speakers aint always easy, caping this at a higher voltage makes it so even the lowest output device I connect to it has enough volume, one problem I have using it with a Windows 10 laptop via BT is if 2 sound sources occur at once (ie VLC and a streaming source both at once) ... no sound is heard if one of those sources stops till I switch to another speaker then back to BT ... or sometimes going back a bit on the time slider starts the sound again, which makes me think it's Windows and not the amp, it has to be the lowest noise amp I've ever setup ever in my life, and due to everything here being DC, the bluetooth bypasses the noise put into the output from the laptop (my main source of entertainment) if connected via wires ... the DC to DC PSU puts a lot of noise through the mic/earphone/external speaker jack and no noise suppression device was ever able to fix it! truly decent amp and low cost and robust, had it over 2 yrs now.

  • @sanjivgamit5056
    @sanjivgamit5056 2 роки тому +1

    Nice amplifier
    Good👍👍 performance.

  • @romilsonsoares9205
    @romilsonsoares9205 11 місяців тому

    Bom dia Posso usar uma Fonte Chaveada 24v 15a em um amplificador de som de 24v 5a que seria o
    ZK-MT21.

  • @jawaharshanthi4653
    @jawaharshanthi4653 2 роки тому +1

    I like it bro 🤩🤩🤗👍👍

  • @ckytgbgmi5806
    @ckytgbgmi5806 2 роки тому +1

    My favourite youtuber ❤️❤️❤️❤️😘

  • @JaviersDIY
    @JaviersDIY 2 роки тому

    Impressive

  • @youssifmahr8427
    @youssifmahr8427 5 місяців тому

    Sir this amp will using with the car recorder?

  • @krimocoucou4716
    @krimocoucou4716 8 місяців тому +1

    Hello my friend, I'm sorry to ask you questions because I'm not in the game, can I use only a black 12V charger: DC 12V 5A power supply? can I put 2 mini speakers of 15W + one of 50W then I wanted to know how to connect a USB key to this device, that is to say which device should be connected to this amplifier to be able to listen to sound on a usb key, can you give me a link so that I can buy it on ali express? thank you for your answers.

  • @markpesa4763
    @markpesa4763 2 роки тому

    What is gud combination of power supply?

  • @mose7752
    @mose7752 Місяць тому

    Muito obrigada!! Muito obrigada!! Era tudo que eu precisava.👏👏👏🌹🌹🌹🌹🇧🇷🇧🇷🌹🌹👏👏👏🌹🌹👏👏🌹🌹

  • @ConveyorMan
    @ConveyorMan Рік тому

    0.42 What is the code of opamp 4 ea?

  • @shivkumarkoshti3082
    @shivkumarkoshti3082 2 роки тому

    Nice

  • @rahul20501
    @rahul20501 Рік тому

    Sir kya ye board Sony d4p me use kar sakte he

  • @gioecheveria1724
    @gioecheveria1724 3 місяці тому

    Es para corriente 110? Se puede usar con 12v?

  • @jahnuburagohain1473
    @jahnuburagohain1473 5 місяців тому

    Usb aur ir sensor iss board main keise connect korte hein ? Plz reply.

  • @afropkerz
    @afropkerz 2 роки тому

    Any idea to help me out? I tried with mid range speakers L/R and a small 30w ayima 3inch subwoofer. I used first 12v power supply and then tries 20v. both times midrange works great but subwoofer doesn't work right it sounds weird and warms up really quickly and with the 20v it blew little smoke also... Is the amp bad or what could be the problem?

    • @peggenlejoncar9529
      @peggenlejoncar9529 Рік тому

      Maybe the ohm?

    • @useridk58777
      @useridk58777 Рік тому +1

      A lot people asking this amp keep breaking at 20v. I just bought this amp and i use 12v. And it heat sink feel warm. So i had to get colling fan

    • @user-pz4hw2lu7e
      @user-pz4hw2lu7e 8 місяців тому

      You used to big speakers you need to used small speakers 6 for mid and 4 for bass with a laptop charger 18v 3.5A

  • @aliyahdonaldson2831
    @aliyahdonaldson2831 5 місяців тому

    is this like an audio interface?

  • @jpcezanne
    @jpcezanne 2 місяці тому

    Great video , but it misses the antena connection !!!!

  • @toufiqshehjad9141
    @toufiqshehjad9141 2 роки тому +4

    Biggest disadvantage is Aux input id mono and Bluetooth connection is so poor ...

  • @iloveaviation-burgerclub-a8145

    How do you choose between aux and bt?

    • @gamingmark54
      @gamingmark54 Рік тому

      Idk too😅

    • @gamingmark54
      @gamingmark54 Рік тому +3

      I think if you plug in an aux cable it all switch auto?

    • @HEREISMULLEER
      @HEREISMULLEER 11 місяців тому

      exactly @@gamingmark54 But you have to disconnect the bluetooth to hear anything, then its will be mono and sound like C@#P

  • @pickuplover4066
    @pickuplover4066 2 роки тому +2

    Can we connect directly to the car battery for amplifier power supply

    • @HEREISMULLEER
      @HEREISMULLEER 11 місяців тому

      12 to 24V DC, connect it wherever you want.

    • @carlosmunoz561
      @carlosmunoz561 8 місяців тому

      @@HEREISMULLEER It could be used in a 12v 5a motorcycle battery recharged by the same motorcycle

    • @carlosmunoz561
      @carlosmunoz561 8 місяців тому

      @@HEREISMULLEER And if I wanted to connect it to the 110v outlet, which adapter would be the best or a good one would be 24v 3a or one of 12v 3a

  • @The_McCoon
    @The_McCoon 22 дні тому

    What to do when it turns on the. Off

  • @3khsieh830
    @3khsieh830 2 роки тому +4

    I bought one ZK-MT21 recently. Its chips are : BT JL As21BP0C466-25A4(but can not find the data sheet from JL). 4 NE5532 OP amp. And 2 class D CS8673E.
    It works fine with good sound. However I faced one problem. If I connect it with AUX input, the sounds become mono not stereo. After debug for whole days. I found the EMI interference between CS8673E and BT chip. I have to disconnect the audio path (remove C15/C17) and input audio signal into main volume directly. Then I can get stereo and 2.1 output. Due to I onle use it for desk PC, no need BT connection. So it's ok to disconnect BT path. But I am wondering, why this ZK-MT21 can't play 2.1 (become 1.1) when using AUX input?
    Does any one see the same problem? Or this ZK-MT21 use the worse EMI chips?

    • @syedtarekali7729
      @syedtarekali7729 2 роки тому

      how did you do it

    • @vishnups4719
      @vishnups4719 Рік тому

      i do have that problem too, is there something i can do to still have bt connection and stereo output?

    • @HEREISMULLEER
      @HEREISMULLEER 11 місяців тому

      I have the TB-21 , it has another chip, but has the mono problem once you connect and use the AUX port. Sounds terrible. Grrrr

  • @thundergamingyt204
    @thundergamingyt204 7 місяців тому

    Bro wt is the subwoofer watt and speaker watt

  • @KAOSshortyrip
    @KAOSshortyrip Рік тому

    How do i connect 2 of these together to handle more speakers without cutting out

    • @isma4956
      @isma4956 Рік тому +1

      La única manera de usar 2 o más es por aux con unos puentes de cables aux

    • @HEREISMULLEER
      @HEREISMULLEER 11 місяців тому

      You buy the 250 watt version

  • @bozi1367
    @bozi1367 Рік тому +1

    how much W i need on power suply to get max out of this AMP??

    • @_lucas_23
      @_lucas_23 Рік тому

      It goes to 24 v but i don´t know how many watts.

    • @emsayonachi9300
      @emsayonachi9300 Рік тому +2

      amplifier only pulls the current it needs from psupply depending on the load.
      people tend to crank the volume at max so to keep the amplifier safe, use only 24V (7A to 8A max) or 10A but avoid maxing volume for long period.

  • @akari7477
    @akari7477 Рік тому

    What is the song

  • @PopatMomu
    @PopatMomu 2 роки тому

    Can I Power supply it with 12 0 12 transformer

  • @dattatraykamble7369
    @dattatraykamble7369 10 місяців тому

    Is amplifier ko display kaise laga sakte hai

  • @shivkumarkoshti3082
    @shivkumarkoshti3082 2 роки тому

    Ye sab alag alag parts kaha par milte hai..... Please reply muje bhi aisa banana hai....

    • @MrMistry
      @MrMistry  2 роки тому

      Link in discription

  • @IFADWORLD
    @IFADWORLD Рік тому

    Can i use it abroad to 100V country?

    • @HEREISMULLEER
      @HEREISMULLEER 11 місяців тому

      yes but dont plug it directly into the wall socket.

  • @narayanant.k.3266
    @narayanant.k.3266 2 роки тому +2

    Can i USE THIS AMPLIFIER for
    ELECTRIC GUITAR. if you don't
    reply i consider that you don't
    know the answer.

  • @EnzoE
    @EnzoE 2 роки тому +3

    Hi, did you know if the ZK-MT21 use the TPA3116D2 or another chip ?

    • @EnzoE
      @EnzoE 2 роки тому

      For people have this question: the ZK-MT21 use x2 CS8673E, if you're interested to know more and if you speaker French go check my YT Chanel > About, there is a link for a GDoc full of information

    • @djumar8284
      @djumar8284 2 роки тому

      I have received today this ZK-MT21 and there were two chips of ChipStar CS8673e

    • @johnbarrow4701
      @johnbarrow4701 Рік тому

      @@EnzoE Hi. I don't speak French, but was able to translate your very comprehensive document into English. It is very comprehensive!
      One question, and this could be me being wrong about what you are saying, due to problems with the translation! You are recommending the ZK-MT21 over other TPA3116D2 based amps such as the XY-S100H, mostly because of the Chinese app related security concerns for models like the XY-S100H? Is that right?
      Thanks

    • @shaikaleembasha3341
      @shaikaleembasha3341 Рік тому

      @@EnzoE this amplefier working at auto rickshaw 12wats,, battery.

    • @user-zf1zd4of1j
      @user-zf1zd4of1j Рік тому

      Какой чип лучше ___CS8673e или TRA3116

  • @shatruhankumar95
    @shatruhankumar95 3 місяці тому

    Mere ko Lena hai kaise mile ga online me

  • @skepticpotato2869
    @skepticpotato2869 2 роки тому +1

    A less than 5minutes working Amp..........just received mine yesterday put a 22VDC power supply (i noticed a spark on the DC Jack connector) then test it with BT connection and played with 1 song the bass and treble when adjusting are scratchy and the heatsink also is getting warmer but the sound it produced is very decent after playing the song i switched-off and assembled the rest of the part but when powering up again it puff a smoke then no more i removed the heatsink and found the two chips are badly burnt it has a fake TPA3116D2DADR this is the same brand and type of Amp that showed here or maybe mine is a copy. the TPA's can handle up to 26VDC that is why i wonder why it burnt out. so be aware of buying this Amp.

    • @peggenlejoncar9529
      @peggenlejoncar9529 11 місяців тому

      The back cover can go together with output on every chanel, better isolation between speaker output.

  • @Laugh-capsule.
    @Laugh-capsule. 2 роки тому +1

    Hey sir, I have a speaker having 30 watt rms and 210 watt peak .Please suggest me a amplifier board.

    • @Windorey
      @Windorey 2 роки тому

      İf it's just one, TPA3118 mono board
      İf it's 2 (stereo) TPA3116D2 stereo board

  • @ANUJSHARMA-tk6te
    @ANUJSHARMA-tk6te 2 роки тому

    What the size of this subwoofer?

  • @nampallylucky9399
    @nampallylucky9399 2 роки тому

    What is the price

  • @jawaharshanthi4653
    @jawaharshanthi4653 2 роки тому +1

    Notification is too late bro

  • @MukeshYadav-ru2bj
    @MukeshYadav-ru2bj 2 роки тому

    Price kitna hai

  • @royalabhi_0001
    @royalabhi_0001 Рік тому

    Sir can i use a 4ohm subwoofer or we need to use 8ohm subwoofer with giving power supply of 24v
    Please reply no one reply i am confuse and how much amp we provide to amplifire

    • @MukundShukla547
      @MukundShukla547 Рік тому

      Subwoofer should be of 4ohms but you can use speakers of 8ohms

    • @shaikaleembasha3341
      @shaikaleembasha3341 Рік тому

      @@MukundShukla547 amplifer is it used for auto rikshaw 12wats battery

  • @haroldquintana1026
    @haroldquintana1026 2 роки тому

    Ok ba yan sa woofer speaker na 100 watts na 10 inches

    • @alexanderdave4821
      @alexanderdave4821 2 роки тому

      Na try ko boss. 200 watts na subwoofer ng acoustic 10 inches. Kayang kaya pabayuhin

    • @shaikaleembasha3341
      @shaikaleembasha3341 Рік тому

      @@alexanderdave4821 amplifer is it used for auto rickshaw 12wats, battery

  • @ChoiDJ2027
    @ChoiDJ2027 2 роки тому +2

    Can it support car batt 12v?

    • @yourlocalratz352
      @yourlocalratz352 2 роки тому

      Yes but has to be a low amp battery

    • @yourlocalratz352
      @yourlocalratz352 2 роки тому

      Takes 5/24v dc

    • @carlosmunoz561
      @carlosmunoz561 8 місяців тому

      @@yourlocalratz352de que amperaje debe manejar normalmente?? Puede ser 12v 5amp? O 7 amp

  • @radharamannath2216
    @radharamannath2216 Рік тому

    Can i use FREDO 8 Inch Double Magnet-4 Ohms/RMS103W/Peak 725W Subwoofer-Black

  • @miroslavgargulak5005
    @miroslavgargulak5005 Рік тому

    50W to určitě nemá a už vůbec ne 100W .Navíc to bude ve třídě D což se téměř nedá poslouchat ,to se možná hodí na nějaké levné rádio .

  • @user-iy2lg6zh2w
    @user-iy2lg6zh2w 6 місяців тому

    Какой пароль на вай фай?

  • @testnreview7317
    @testnreview7317 2 роки тому

    The ic is look like not original

  • @kamandyvlog5139
    @kamandyvlog5139 2 роки тому

    magkano

  • @ZAEC39
    @ZAEC39 Рік тому

    ты еще тоньше мог провода впаять туда?

  • @user-jf7ob4do2o
    @user-jf7ob4do2o Місяць тому +1

    Price plz 😢😢

    • @MrMistry
      @MrMistry  Місяць тому

      inkocean.in/products/wuzhi-zk-mt21-bluetooth-5-0-subwoofer-amplifier-board-50wx2-100w-2-1-channel-power-audio-stereo-amplifier-tone-board-bass-amp-aux?ref=e7ixfoa59e

  • @NIGHT-ws3pc
    @NIGHT-ws3pc 2 роки тому

    improve audio capture, buy more professional microphones for test recording

  • @user-mp2lo2mx1k
    @user-mp2lo2mx1k 2 роки тому

    เสียชับเบดม่ออก

  • @sivanagaraju8035
    @sivanagaraju8035 Рік тому

    Naearaju Nakka JBL I 200
    🇮🇳🔊🔉🔈🙊🙉🇺🇿💯🗣🧖‍♀️

  • @baskarshanthi505
    @baskarshanthi505 2 роки тому

    What is the price friend?

  • @jassen22
    @jassen22 7 днів тому +1

    Poor sound test

  • @LUCKYCRAZYSTATUS
    @LUCKYCRAZYSTATUS 5 місяців тому

    To yah amplifier kabhi mat lena duplicate he Maine to do liya donon ic kharab ho Gaya he mera 5000 rupee kharab ho gaya he