you need 3 sizes, I can't remember the exact amount that I bought for each, but i bought extra in case I messed up. I had left over fuel line as well also I replaced the fuel lines in the engine compartment which are 8mm also... 10mm (3 feet), 8mm (10 feet), 6mm (3 feet). I purchased bulk ethanol compatible fuel line from my local auto parts store, so unfortunately I don't have a link for you.
Thanks for following along. I bought a bunch since that fuel line is also used in the engine bay, I still have a lot left over as well. I probably used 5' or so?? I didn't take final measurements unfortunately
When you put the tank back on, did you have issues with the straps feeling a bit "short"? I'm having that issue on my end and trying to figure a solution
Here’s all the sizes at the tank that I came up with. 10mm or 3/8 or .375 evap 8mm 5/16 or .3125 for feed & return 6mm or 1/4in or .25 evap 48mm or 1.88 inch filler neck hose 14.9mm or .5905 inch Filler neck breather hose
Great vid. am searching for this type of vid for the R33 GTR VSPEC, but very much enjoyed this one.
Great video as usual!
Awesome video bud! Really clear and had everything I needed to know. The efforts are much appreciated, thank you!
Appreciate it! that's why i decided to start documenting things, glad it's helpful for you
Great Video! Winter is coming up here soon and I'm going to replace the fuel and coolant lines while my R33 is in storage, this was super helpful.
Glad it was helpful for you
Great tutorial
Hey such a helpful video. But are you able to send me how much ft of each hose is needed? And also a link to go by the hose. Thank you
you need 3 sizes, I can't remember the exact amount that I bought for each, but i bought extra in case I messed up. I had left over fuel line as well also I replaced the fuel lines in the engine compartment which are 8mm also... 10mm (3 feet), 8mm (10 feet), 6mm (3 feet). I purchased bulk ethanol compatible fuel line from my local auto parts store, so unfortunately I don't have a link for you.
Dropping mine soon because of an apparent leak that I can't seem to find. Hopefully It's repairable & I don't have to replace the whole thing 🥴
Subbed. Awesome walk-through. Thank you for including all of the sizes and solutions. How much, in length, of 8mm (5/16) did you need to purchase?
Thanks for following along.
I bought a bunch since that fuel line is also used in the engine bay, I still have a lot left over as well.
I probably used 5' or so?? I didn't take final measurements unfortunately
Dude probably the best video wish u could of said how much hose we need about on the 3 hose types. Also where do you get the hoses?
Thanks 👍
I don't remember the totals but it isn't a whole lot. I used bulk ethanol compatible hose
When you put the tank back on, did you have issues with the straps feeling a bit "short"? I'm having that issue on my end and trying to figure a solution
I didn't.
Make sure you have the tank all the way up against the body and that the hoses aren't in the way. 👍
What size is hose that goes/Joins the fuel neck filler to tank? 3/8?
Unfortunately I don't think I ever measured the filler side of the tank
Here’s all the sizes at the tank that I came up with.
10mm or 3/8 or .375 evap
8mm 5/16 or .3125 for feed & return
6mm or 1/4in or .25 evap
48mm or 1.88 inch filler neck hose
14.9mm or .5905 inch Filler neck breather hose
I just dropped my tank to fix some rust and I do not look forward to accepting that I will need to drain the tank in order to get it back up.
Good luck, hopefully it goes well for you
Did you ever rebuild or upgrade the fuel pump or sending unit?
Not yet, in tank setup is still stock. I'm finalizing a power goal and will be getting new pumps/relays and wiring this off season
From where did you get the hose for the e85?
link to the hose clamps you got, please
amzn.to/3xkK6to
My evap hose is ripped
6:50
@@Darkfaderalert yeah it's common for the fuel lines/evap to break at this age