All my BYOG .UCE files stopped working. AtGames was no help. I had the 5.68.0 Firmware file I got a hold of a while back that AtGames sent to a friend when his cabinet wouldn't update. I was told by AtGames not to downgrade firmware because it could possibly brick my system. Probably not a smart decision but I did it anyway. It installed successfully, but going back to 5.68.0 didn't change a thing. My .UCE files still didn't work.
Update: Not sure if downgrading firmware to 5.68.0 on my AtGames Legends Ultimate helped but I managed to get around 220 games to successfully boot up in BYOG, all without any custom bezels I made showing up :( . I got a few of my favorites to work like Street fighter 3rd Strike, Marvel Super Heroes and a few Neo Geo titles. At least I got something back. Better than nothing I suppose.@@gogeekgaming
@@johnbraun814 I don't do videos. As for Unchained, you can watch any instructions for a raspberry pi and emulation station. It's the exact same front end and setup.
5.70 Broke my BYOG too. I then tried a factory reset, update to 4.15 and BYOG still didn't work. Then I went to 4.20 ... still not working. I did the same with 5.61 and finally 5.68 and nothing. It seems when you go to 5.7 BYOG breaks and even if you go back to a former firmware it doesn't correct the problem. Does anyone have a fix?
Anyone else getting problems with the whole control panel locking up on a game that uses the two joysticks (Robotron etc etc) using coinopsx on firmware 5.70
I updated to 5.68 but the appstore doesn't show up in order for me to download coinops, if I go online to download coinops will I have to update to the current firmware or can I log in and download coinops?
I worked as a software engineer for 20+ years. Did they EVEN TEST this version??? No. This version broke 1/2 my addonx games. This would have taken 1-2 hours to test, MAX. I can't even rollback the firmware, or reset the puck, because as soon as the device restarts, it loses connection with my joysticks, and I can't answer the yes/no question about resetting. That's on top of every time I turn on the puck, I have to restart it several times to get the joystick pairing to work, EVERY SINGLE TIME. I've used the Legends Gamer Pro all of 4 times ever, because of all these problems. I want to destroy it with a sledgehammer at this point. I'll probably cannibalize it, and replace the joysticks and buttons in my mame arcade cabinet with these. That's all this thing is good for. The input lag ALSO sucks.
Yeah I still think there were legal or maybe partnership reasons for this. And technically, I agree as I don't think there was great quality control/testing or maybe that was intentional who knows 🤔
Here is the bot-like answer I bot from MichaelB site when I posted my BYOG not working: "Please note that those complaining of it no longer working are all running the same build or a very similar version of the one you are while there are many more customers running builds that are not affected. The community needs to understand that these are third-party and AtGames does not provide support for third-party software and applications. The usage of UCE’s and ROMS is completely at the owner's own risk and owners take full responsibility for their usage on the AtGames platform. Subsequently, any support for these types of issues, falls outside of our purview. We designed our platform and ecosystem as an open and connected platform because we believe that the end user should be able to use our devices without restrictions and however they enjoy them. This does not mean that we build our own firmware updates to ensure that all third-party software applications function and operate without interruption. This is not AtGames' responsibility, and we do not advocate the usage of unlicensed games nor will we assist in that matter. AtGames developers do not interact with unlicensed software, applications, or games. Thus, we are not in a position to lend assistance or devote resources to “fixing” issues related to these third-party software applications. Thank you, AtGames Customer Support"
what kills me is mine was working perfectly, I had all the games I wanted. Why the hell did I do that. It makes more sense for One Sauce to update, what do you think?@@batfink1746
@@gogeekgaming pretty sure it was intentional. They announced they were delisting CoinOpsX from the AppsX Store with 5.71. (which is another update available but opt-in.)
I have the ultimate, mini and pinball. And I updated the ultimate and mini without doing my usual research first and of course it broke my byog too. But if Atgames doesn’t fix this, I’m selling all three and will stick to Pc handheld gaming….🤬
@@boukhilamenaketh They've patched it (works on 5.7 and 5.71) but the patch is still being tested and hasn't been released yet to the public. Soon. Sauce is also being updated with a new UCE with additional features. That's why the testing is taking so long. It will more than likely be released altogether with the new marquees addon they've been working on for nearly a year.
Run CoinOpsX and One Sauce!
ua-cam.com/video/K4bETzbn_W4/v-deo.html
All my BYOG .UCE files stopped working. AtGames was no help. I had the 5.68.0 Firmware file I got a hold of a while back that AtGames sent to a friend when his cabinet wouldn't update. I was told by AtGames not to downgrade firmware because it could possibly brick my system. Probably not a smart decision but I did it anyway. It installed successfully, but going back to 5.68.0 didn't change a thing. My .UCE files still didn't work.
That's just horrible sorry to hear that!
Update: Not sure if downgrading firmware to 5.68.0 on my AtGames Legends Ultimate helped but I managed to get around 220 games to successfully boot up in BYOG, all without any custom bezels I made showing up :( . I got a few of my favorites to work like Street fighter 3rd Strike, Marvel Super Heroes and a few Neo Geo titles. At least I got something back. Better than nothing I suppose.@@gogeekgaming
Legends Unchained is my goto now. Much more control and capability. Closer to traditional pi builds.
👍💯💯💯
same here and as it completely bypasses the @tgames OS, I never got bugged about the update to 5.70 and my cab still works great.
can you please do a video on Legends Unchained? @@youwantfrieswiththat2
@@johnbraun814 I don't do videos. As for Unchained, you can watch any instructions for a raspberry pi and emulation station. It's the exact same front end and setup.
Does Unchained remove the built-in games or purchased game packs? And can you still use the HDMI mode?
5.70 Broke my BYOG too. I then tried a factory reset, update to 4.15 and BYOG still didn't work. Then I went to 4.20 ... still not working. I did the same with 5.61 and finally 5.68 and nothing. It seems when you go to 5.7 BYOG breaks and even if you go back to a former firmware it doesn't correct the problem. Does anyone have a fix?
🤔
My atgames at start the Bluetooth lights are blinking with the new firmware update help
Sorry man don't know what to tell you there besides AtGames support or community.
Anyone else getting problems with the whole control panel locking up on a game that uses the two joysticks (Robotron etc etc) using coinopsx on firmware 5.70
Ughhh that sucks 😞
So what can you do with version 10940_A18???
Not sure 🤔
I was kikked out from facebook group when i sayd the 5.7 will ruin the machine totally 🤬
Wow 😮
But you are right...
Thanks for the video. Let's hope AtGames didn't do this deliberately.
Yeah me too 👍
I updated to 5.68 but the appstore doesn't show up in order for me to download coinops, if I go online to download coinops will I have to update to the current firmware or can I log in and download coinops?
Oh crap not sure myself 🤔
I worked as a software engineer for 20+ years. Did they EVEN TEST this version??? No.
This version broke 1/2 my addonx games. This would have taken 1-2 hours to test, MAX.
I can't even rollback the firmware, or reset the puck, because as soon as the device restarts, it loses connection with my joysticks, and I can't answer the yes/no question about resetting.
That's on top of every time I turn on the puck, I have to restart it several times to get the joystick pairing to work, EVERY SINGLE TIME.
I've used the Legends Gamer Pro all of 4 times ever, because of all these problems. I want to destroy it with a sledgehammer at this point. I'll probably cannibalize it, and replace the joysticks and buttons in my mame arcade cabinet with these. That's all this thing is good for. The input lag ALSO sucks.
Yeah I still think there were legal or maybe partnership reasons for this. And technically, I agree as I don't think there was great quality control/testing or maybe that was intentional who knows 🤔
i stupidly upgraded and now I can't use BYOG :(
Ughhh 😩
Same, but there's got to be a way to re flash and older firmware in cases like this. Just time to do some googling.
Here is the bot-like answer I bot from MichaelB site when I posted my BYOG not working:
"Please note that those complaining of it no longer working are all running the same build or a very similar version of the one you are while there are many more customers running builds that are not affected. The community needs to understand that these are third-party and AtGames does not provide support for third-party software and applications. The usage of UCE’s and ROMS is completely at the owner's own risk and owners take full responsibility for their usage on the AtGames platform. Subsequently, any support for these types of issues, falls outside of our purview.
We designed our platform and ecosystem as an open and connected platform because we believe that the end user should be able to use our devices without restrictions and however they enjoy them. This does not mean that we build our own firmware updates to ensure that all third-party software applications function and operate without interruption. This is not AtGames' responsibility, and we do not advocate the usage of unlicensed games nor will we assist in that matter.
AtGames developers do not interact with unlicensed software, applications, or games. Thus, we are not in a position to lend assistance or devote resources to “fixing” issues related to these third-party software applications.
Thank you,
AtGames Customer Support"
same i am raging took my ages to download the pack now need to do again i am spitting lava here fucking arrggggg
what kills me is mine was working perfectly, I had all the games I wanted. Why the hell did I do that. It makes more sense for One Sauce to update, what do you think?@@batfink1746
Same here, killed all my BYOG games. Atgames is taking no responsibility for this. Probably planned to elimantate 3rd party games.
Yeah just bad update 😕
@@gogeekgaming pretty sure it was intentional. They announced they were delisting CoinOpsX from the AppsX Store with 5.71. (which is another update available but opt-in.)
Funny that right at the same time these machines break from firmware updates they all of a sudden start selling game packs..... coincidence? Hummm
I got the awesome sauce work with the newest firmare with 1.1. 😊🎉 Im so happy right now.
Niiice! 💥
im trying to setup sauce now i have the full download , it just doesnt seem to load up , how did you get your to work
I have the ultimate, mini and pinball. And I updated the ultimate and mini without doing my usual research first and of course it broke my byog too. But if Atgames doesn’t fix this, I’m selling all three and will stick to Pc handheld gaming….🤬
Yup this will definitely hurt them especially for those who unfortunately updated and now has a broken system 😔
Broke my coin ops games.
💩
omg i updated and lost byog...........
Ughhh 😣
Same here. So so so pissed… is there a solution showing up which will allow saUCE to work on 5.70? Turned back to 5.68 but didn’t change a thing… :(
@@boukhilamenaketh They've patched it (works on 5.7 and 5.71) but the patch is still being tested and hasn't been released yet to the public. Soon. Sauce is also being updated with a new UCE with additional features. That's why the testing is taking so long. It will more than likely be released altogether with the new marquees addon they've been working on for nearly a year.