DIY 3.7v Battery protection Module (from old mobile batteries) [E9]
Вставка
- Опубліковано 8 лис 2019
- These circuits are most important for '18650' batteries because if we discharge them deeply they loses its capacity quickly and may not able to charge them again. so if we add this circuit (BMS) it will cutoff's the o/p supply when the battery is lower at a particular voltage in my case it cutoff's at 2.35v and it also works as short circuit protection.
can we repair a laptop battery:- • DIY laptop battery rep...
Instagram:- / diywithbatteries
Twitter:- / 18650diy
Thanks for watching!!!
Please Don't forget to Subscriiibe 😊...
*Science never sleeps 🥴✌...
#Battery_Protector#Cut_Off_Circuit#Electronics_Circuit#howtomakechargingmodule#chargingprotectionmodule#chargingmodule#18650batterycharger#18650Battery#lipo#battery#batteryprotectionboard#Battery#Lipo#ChargingModule#18650Battery#lithium#18650battery#protectionboard
Thanks for watching!!!
Please don't forget to
Subscriiiiiibe 😊.
can you do same with laptop battery and make a video on it
@@chandan1015 sure i will.
Thanks for watching!!!
Have a nice day :-)
Brother you don't mind if I may ask, where are you from? Which country you are from? Hope I could fly to your country one day to meet up with you face to face hehehe, you are really one in a million GENIUS and definitely an extremely RARE tip top GURU in these complicated yet very important gadgets!!!!!
Brother, which is the best battery module in your opinion and your guidance, could you pelsee guide me please please!!!
Hello sir thank you...
Can you please tell me what is ,t, the middle out on battery
Hi! Though the idea is not very unusual I really liked your neat soldering. It is really not often one gets to see some neat work at basic levels as people usually get carried aay by the bigger ideas and tend to forget the basic steps. Thank You for reminding that "Triviality makes perfection but Perfection is no Triviality".
Thanks for visiting me, I have joined you. This is awesome, as you know I'm a micro scrapping woman who processes e-waste whilst having a giggle doing it, I have never retrieved these, I will now, this was very clever!!!! 👍
Thanks for visiting me too. Hehehe... 😁👍
@@DIYwithBatteries 😁
DHANYAWAAD SIR JI AAPNE BEST JAANKARI DI.AUR BAHUT DETAILED TARIKESE SAMAJYAYA.WELL DONE.
Nice! I actually tried it, now thanks to you because you confirmed my work.
Bhai aaj hi subscribe kiya tumhe aur yeh dhansu video feed mein aa gaya. Thanx bhai. Best of luck for your future. Keep posting good stuff.
Ek baat aur batao bhai, jis end per multimeter lagaya tha agar wahin per 2 pin wall connector laga diya jaye to yeh batteries ko charge bhi kar sakte hain na?
@@varunkumar-hw5uo Ha jee kar saktehe good question 👍 you should try it.
Thanks for your intrest.
Have a good day Buddy :-)
Thanks for sharing 🙏🙏
Great idea 👍👍
Thanks man. ✌
Great work
Thank you for sharing your knowledge with us.
Stay well and good luck in your future.
Ashraf from Scotland 🏴
Thanks for watching Ashraf and there's more stuff to come ;)
Thanks for to show this experiment
Thanks for your interest.
👍👍👍👍👍
excellent
Thanks 👍👍👍👍👍👍👍but can this board protect the battery from overcharging ?....The is the best video 👏👏👏
Good question , use a capacitor instead of a battery and it cutoffs at 4.3v maximum i already tested it but i didn't shown on video Thanks for ur intrest🙏.
@@DIYwithBatteries show that in another video...it already protects from overcharging I think..
Does li ion battery(round shape) has its own protector in it as shown on some videos?
@@mgmg-nr2dj Nope! But you can purchase online with different shapes and sizes (round shape)
is that the save cut off voltage for 18650 li-ion battery? and does any old mobile battery circuit function as 18650 li-ion battery charge/ over discharge protection modules?
Yes!
Very good
Varry nice
Good video :)
Thanks for checking out my channel mate =)
Can i safely charge Lithium ion Battery using this bms? Directly from mobile charger? When battery is fully charged dose this bms stop charging?
Yeah man it was designed to cut off the power when the battery reaches its peak voltage
Good
Thanks man!
once low voltage tripped is there a way to get them "bms" active again?
i got battery shows 0v on tabs but when i measure battery -+ it's 4.0v bypass bms, so bms must be tripped..
Yes! It will activate the bms automatically when the battery voltage rises cause of high resistance, some bms should be tripped.
just use a jumper connect main + of the battery & bms 👍
@@DIYwithBatteries ok Thank's for the reply..i shall give it a go..
⚡🔋⚡
🔋🔌💡
Does this protector module prevent the battery from short circuit. If I short circuit will the circuit module prevent it by cutting off current?
Exactly! 👍
Thanks, and my sincere greetings
Everything is understandable, but what is the appropriate electrical resistance value.
Thanks again and I hope for a response from you
Electrical resistance value Hm.... check out later you got point lol :D
You can bypass apple security for changing batteries by separating the circuit from the battery and soldering it to a new 3.7v battery 😉
@ • 👍 lol
Done that
where can i get the Ultimate welding practicing board and kit ?
just to practice that, is there such a thing ?
Haha.... Yeah you can find it in old mobile batteries.
Just to practice lol :D
@@DIYwithBatteries oh i meant other thing, but actually thank you sir
I have another serious question though, does this part in batteries from certain phones to other? Like is this part of samsung galaxy s2 differes from lenovo A2010a phone's battery? How can i tell ?
They have different resistance for different types of mobile batteries but functioning is same :D
@@DIYwithBatteries thanks
I have a simple question if I do use a single 18650 connected with this module how do O know if its charged or how much time does it take for a single 18650 cell to charge with a 1000mah module
Normally it takes 2 hours for a normal 18650 cells and it also depends on battery capacity
Please Sir are these lithium battery protection module effective?
Why do these batteries sometimes get deeply discharged while these modules are attached to them?
No!
These modules are there to protect the batteries from deep discharge
Can i connect 5v charger in that bms pw+ and pw- point? Plz reply me😥😥
Yes! Of course & it designed for 5v didn't you watch the whole video lol
Ok felicitari
So instead of buying a TP4056 module, if i connect 1 of this taken from an old cellphone battrey to a 18650 li ion, this would work the same as a tp4056.
But not exactly. Because the current limit is very low for these boards. So better use TP4056 to get max load.
Thanks for watching!
Nice video, i have some questions,
So i did this with my tablet battery and it started for some time but battery was low so i start charging it by usb, problem was it was heating up but no malfunctioning, after full charge i left it on overnight, in morning when i checked on it the tablet was completely drained.
So my questions are,
1) Can i charge the battery with different module?
2) Will it work if module is Designed for lower mAh battery than what I've connected to?
1) Sure you can use any other module!
2) Nah.... choose better one like samsung Or mi battery module cause they can handle high current 2Ah max, and we can also use normal modules but the charge & discharge current should have be low, sometimes lower than 500mah
Thanks for cmnt bruh and i would like to answer if you have any doubts. 👍
@@DIYwithBatteries thanks dude for replying. I have no doubts but one problem,
I know this is completely off topic from your video but i need help with my tablet, the problem is, i have a tablet with dead battery so i bought new battery couldn't find the same model but same volts problem is the new battery have only 2 wire positive and negative and my tablet have 4 the 2 extra wire are for temperature and id,
So i am now trying to connect the new battery on my tablet but no success,
Can you tell me how can i start the tablet with this new 2 wire battery instead of 4.
Use a resistor (1k) , connect it with the 2 pins which are id & temperature, but firstly you have to check the resistance of those two pins connecting with -ve pin of battery in series. And then you have to check out the pin which have a low resistance and then cnnt the resistor with -ve pin in series.
"And then you have to check out the pin which have a low resistance and then cnnt the resistor with -ve pin in series."
Didn't understand this part. Can you describe it more precisely.
How to connect two modules in serie, to make a 2S ( 7,4V ) bms . Thanks, Jan
That's a good question just connect "+" (- +) "-" = 7.4V
Don't connect the battery in series, connect the circuit in series.
You can also find a charge indicator circuit in my channel go find out. you may need it, if you are working with 2S battery
Thank you very much: I will try this👍🤞🙏
Very interesting, thanks. I think a voice explanation would be better than annoying music though...
Will do thanks for watching man 👍
What is the max discharge current of those bms?
I need a bms with 3 amps discharge current. Can suggest one for me please?
Connect them in Parallel 👍
Bro what is the overcharging protection voltage ? At how many volts it stops charging?
4.20v! 👍
What Is the name of that part u removed?.the top of the battery with prongs?
Mention it
Can u use this module to charge the bowerbank, than after it fully charged use same module to charge the phone
Using 5 same type of batteries
@@alialiharb8941 yes! we can use this but the i/p current should be low for high amp batteries.
Thanks for watching! Have a nice day.
Nice experiment bhai...
kya tum is battery ka backup nikal sakte ho kya ?
if 4 v dc led strip ispe lagane ke bad kitna time chalegi
plz make video
It depends on the battery capacity and also how much current that we draw at the o/p load.
Thanks for your intrest bhai...😊.
Sure I'll make seperate video on it 👍.
@@DIYwithBatteries 1 aur doubt tha bhai..
mine 4 v dc led strip 3.7 v mobile battery pe lagai to o strip 250 mAH current le rahi thi...
aur fir 5 v mobile charger pe lagai to 2 Ah current le rahi thi..
yisa kyo bhai ?
@@raviingole1212 if you add a 6v battery it takes 3AH may be! but the LED strip can gets heat so you have to use a resistor if you wants to increase the input voltage.
Better Use 2ohms resistor for 3.7v Battery to connect a 4v LED strip.
Because i used a 3ohms resistor for 3.7v battery to connect a 3w LED.
Thanks for your great comment Bhai... .
Can we use 2 batteries in parallel in this bms
Plz reply as soon as possible. It's important for me
Sure! 👍
Hy, can you pls tell me how to make this protection charger safe for a 350mah 3.7v lipo battery from a disposable vape pen? I have no knowledge but I have a t100 and I like to solder.thank you!
Cool just a resistor to reduce the current from the charger.
You can use 3ohms 👍
Bro is it safe to charge the cellphone battery directly with the 5v adapter? Will the protection circuit strip prevent excessive charging?
It's safe to charge it with 5v adaptor but you have to disconnect when the battery is at 4.2v !
Better to use this free circuit Dude 👍
@@DIYwithBatteries okay thanks 🙂
@@DIYwithBatteries sir keya mai dono 18650 battery eak circuit se charge kar sacta hu
@@DIYwithBatteries sir please tell
@@FUNNYVIDEO-rn9xm Sure buddy you can use as much as you can but make sure do not charge/discharge more than 1A.
O vídeo é excelente. Só não achei o diagrama, pois estou com problema de vista e não consegui ler o valor do resistor que vai à lâmpada de led usada para descarregar a bateria e nem a voltagem/amperagem usada depois para carregar a bateria com o protetor. Obrigado pela atenção e forte abraço do Brasil.
valeu cara me ajuda muito ;) e não deixe de assistir meus outros vídeos espero que gostem Haha
Can I use swollen battery for protection??
Yes you can, if you reset your battery ;)
Because I was thinking of this XIAOMI battery module is only to control XIAOMI battery, but when I saw you connect TWO pieces of 18650, so I see hope in you after watching this video, but my main concern and worry is, can this XIAOMI battery module able to CONTROL a total of 6 or 8 pieces of 3400mah or 3500mah x eight pieces of 18650? Will this XIAOMI battery module cannot control a total of eight pieces of 18650 and in the end my smartphone and batteries EXPLODE?!
Make sure to avoid Short circuits ⚡
Are all smart phone battery module ,same voltage ?___if you take 3300Mah battery module ,on a 4200Mah is it going to reduce the amp to 3300Mah, what will happen?
Nope! The voltage is difference a little bit between 4.20 to .30v it depends on the quality of the boards.
They are also depends on the mAh of the battery and yes it may decrease the mAh little bit.
It have to touch the battery body to make heat sensore work
You are freaking Genius.
But there is no heat sensor in this Board. lol and they are mostly in laptops.
Please make 3.2 volt lifepo4 battery protection circuit
Sure!
Thanks for watching Buddy. 😊
Bhai... Smart phone ki hi battery leni he kya?... Purane keypad wake phone ki battery le sakte he kya...
Sure Bhai... Sub mobile batteries me ye circuit rehethahey... !!! :D
@@DIYwithBatteries Thank you for replying... Mere pass jo battery (LG LGTL-GBIP-830) he usme 4 terminals he. 2 positive 2 negative. Isme board ki doosri side se li-ion battery ko konsa positive aur konsa negative jayega samajh nahi aa raha, usme likha bhi nahi he...aap kuchh help kar sakte ho kya..
can i use this for 2s configuration?
Yeah sure you can use it 👍
How many volts did put to charge those parallel batteries and how many hours too?
5v from normal mobile adapter.... And it taken 3hours to charge.
And also it depends on the capacity of the battery!
Do I need to equal the same voltage of the other one to be charged? beacause if their not equal at voltage it might be overcharged and the other one is undercharged
@@dioemiltoh5551 Yes! you have to (balance) equal the battery voltage if it is connected in series.
Ty
may i use 3cell (18650 ) in parallel ?
Sure 👍
Bro are the batteries able to charge directly from the charger using this module.
Yes!
Best video ever...
Bhai kya hum isse lithium ion battery multiple times charge kr skte hai.? Please reply
Ha je! we can charge multiple times.
Thanks for watching!!! 😊
Hi, Im Ryan from Indonesia
I have question. I want to replace my sony Xz2 Premium battery (3400 mAh) with other battery which has higher capacity (like 4000 mAh or 5000 mAh)
1. Can I do this method? Dissassy' my sony battery n then take the bms to replace bms on the new battery.
2. Do I need to re-calibrate the battery on my phone sony? If I need to re-calibrate the battery, what should I do?
Thankyou sir 🙏
I think yeah you can use the old sony bms by connecting it with new battery cuz it just ok if there is 1ah difference (low or high) but if your new battery have more then that then u can't use, it may disconnects the power when you increase your mobile brightness either than that it works good I hope 👍
Kya jis mobile ki battery ke circuit mein sirf ek hi IC Ho To Kya wo auto cut Karega circuit
Aur agar mein Mobile ke circuit ko series Mein connect Karun To Kya wo Thodi Jyada voltage ki battery ko charge kar Payga
Ha jee vo sirf ek hi IC me be auto cut karega aur thode circuits mey components nahii rehtahee voo fake valla he !
Aur agar tum mobile ki circuit ko series me connect karengee tho vo karab hosakta hee, but you can try 👍
Bro does this board regulate voltage of batter
Yes Buddy it will regulate the battery voltage at 4.20v, if it is higher then that it will disconnects the i/p from the Power adaptor.
@ Better use a regulator of 3.7v to 4.20v max.. just like the battery needs If you use above voltage it will blowup your smart phone.
And the i/p must be CVCC!
Al extraer el BMS lo recicla ...pero que hace con el resto del material ? Lo que resta es altamente contaminante y peligroso
¡sí lo es! El proceso de reciclaje de desechos electrónicos debería aumentar para reducir este tipo de contaminación, aprecio a ese hombre 👍
@@DIYwithBatteries Saludos desde Maschwitz Argentina
what is tht thing you put on the led light?
I don't understand what exactly you wants to know? I think it's aaa Heatsink 😉
Maybe resistor?
In this way, how many 18650 batteries, we can charged?
We can use as many as possible but it can only handle upto 1.5Ah max (better to use 6 cells as I'm using) use charge/discharge and if we draw more than that then it'll won't work!
I hope you'll figure it out.
Good question btw 👍
Just what i'm looking for, thank you, BTW i try to replace my huawei mobile wifi battery with one 18650 with module from the original battery (4-pin) but no luck.. it does not working, the modem show battery error. still figure it out.
That's really great Dude You can figure it out.
Thanks for watching!!!
Have a good day :-)
Can I conect this BMS on 6 cells to parallel one cells is 2000Mah. 6 Parallel cells voltage is 3.7 Volt
Sure! Just make sure to use less than 1Ah load even to charge it. 👍
@@DIYwithBatteries I use 5 Volt 0.15 Amp Charger to charge this cells it's Right? And tell me how much time required to charge this 6 Cells Of 2000 MAH?
@@Sheikhadnan67835 it takes hours but that's good slow charge is good charge 👍
How to fix LED in this and make it like a TP4056😁😁😁
Oh yes! we can use 3pin Bicolor LED as a charge indicator but we can't find the cut off pin of those SMD version IC's. LOL
Can i charge it using 5v and also can i use 10000 mah battery
Yes! you can charge it using 5v and also you can use 10,000mah or above battery but the o/p load current should be low (1ah) and also the battery can charge upto 4.2v Max.
Thanks for watching!!!
Stay tune... :-)
Can we use any lipo batteries?
Yes! we can use any type of Batteries which is at 4.20v Maximum.
Thanks for your intrest :-)
@@DIYwithBatteries i want to use 18650 batteries for my project.installing mini charger modules inside the project device is not cost effective. Because i have many other 18650 batteries. If i use charging modules as universal charger the discharge protection will not be available for the battery. Now your video gave me the solution. I have few damaged 1s lipos. I will use those board from each batteries. Thank you so much❤️
@@aju5405 well! That Sounds good keep on working that 👍
I have a question.can i use 9wh battery protection circuit as 15wh battery protection circuit?
It depends on the current limits of the circuit and in my case 1Ah max.
is dangerous things is happend such as blast or phone damage if i use normal battery protection circuit to an 4000 mah 3.8v 15.5wh protection circuit?please explain!!!
@@abdullarakib2950 it can't hold heavy current like battery for small circuits and it's automatically disconnects the o/p.
@@DIYwithBatteries can i use it?
@@abdullarakib2950 im not sure but use a capacitor instead of battery and try some dummy load on it and their you'll find of what exactly it suits or not.
Hi hello brother, I sincerely hope I could get your reply. I have a plan, a project, I believe you saw many UA-camrs been doing a kind of project, they use 4 to 6 pieces of 18650 batteries, connect together and use it as a direct source to power up their smart phone. And when I saw you connect 2 red color battery in this video, OK brother, my question is, in this video,the battery module you using, can control how many pieces of 18650 battery? For example, my plan and project is, I would buy 6 to 8 pieces of Panasonic 18650, one Panasonic battery rated at 3,400mah x 6 = 20,400 mAh, or 3,400mah x 8 pieces of Panasonic 18650 = 2,7800mah. May I ask brother, if I connect 6 to 8 pieces of Panasonic 18650 or sanyo 18650 x 8, can this XIAOMI battery module able to control my 6 or 8 pieces of 18650 such as, to control the 8 pieces of paradell 18650 battery charging cut off at 4.2v? or it will be very dangerous?
Firstly I appreciate your cmnt 👍
Yes! You can add so many 18650's as much as you can and it doesn't matter what type Or MAH of the battery, but it's only matters how much current you draw through this module, cause this can handle only 1AH max... (Normally) Even charge Or discharge. So make sure to avoid more than 1amp loads.
Thanks for watching Brother! :D
@@DIYwithBatteries OK brother I am confused of what is mean 1ah load? So, how do I know my smartphone will draw how many AH? I think of either I use 6 to 8 lithium 18650, or I will buy one LI-POLYMER 20,000mah powerbank and use the li-polymer battery connect to the battery module, then direct supply the power for my smart phone
@@DIYwithBatteries brother can you explain to me in layman term because I stupid and not very sure about the eletric. Brother, I don't understand what this two means:
I don't understand this two you say, brother, can please please explain to me in layman term
1) this module can handle only 1AH max and can "make sure to avoid 1amp loads"
2) so make sure to avoid more than 1amp loads
What does this two means, brother please please help me!!!!!
Meaning, one piece of yours this XIAOMI battery module, I solder all my 18650 lithium battery in PARALLEL, one piece of this battery module can handle and control how many pieces of my 18650 battery for direct source supply my smart phone?
If it is parallel then there's no problem how many 18650 batteries you put I tried it.
@@shurimanslegacy8729 Thanks buddy!!!
How indicating battery full charge
There is no such type of indicator for this Board, we have to use Mutlimeter.
But im gonna make a separate video on it.
stay tune... Sir!
Pano pag Yan lng Ang battery protection tas tatlong 3.7v na 18650 tas Ang connection at parallel pwede ba un?
maaari kang gumamit ng maraming hangga't maaari ngunit ang kasalukuyang ay dapat na mas mababa sa 1 Amp 👍
@@DIYwithBatteries 1 A ano Un paps?
Please reply Bro please mujhe bataye ke ham kaise check kare kai hamara mobile battery protection circuit working hai Mai nahi
Kyo ki Mene to phuli hue battery mese
Circuit Ko nikala hai
Or kya hame Sab battery me ye milta hai circuit
Ha je sab (mobile) battery me yee circuit reheta he aur, circuit ko check karnekeliyee use the capacitor instead of battery! 👍
Thank you so much
It is okey for solar panel 7v for charging or not
Not good! add a 7805 Or buck converter 👍
sorry buddy how many battery you can put in paralel? only two?
We can use only 500mah either charge Or discharge, so it doesn't matter how many batteries we're connected in parallel.
Haha... 👍
@@DIYwithBatteries I took it from a 3000mAh smartphone battery (samsung core prime) you think is the same or highter
@@christianepremian5322 I think it's a higher Or Quality board. Although We can use max... (1000mah) 1Ah for all type of mobile batter..., But it's better to use 0.5ah for long life. 😊👍
Hope brother you understand what I am asking, in short, meaning, you connect only 2 18650 with this XIAOMI battery module, right? OK let say if I buy 6 or 8 pieces of Panasonic 18650 (3400mah x 8) or sanyo 18650 (3500mah x 8) can yours this ONE piece only XIAOMI battery module able to control all 8 pieces of paradell 18650, as in to control the OVER continue charging and control the CUT OFF charging once the 8 pieces battery already full charge? Reason because I wanna build a 20,000mah massive battery for my smartphone as a DIRECT POWER SUPPLY. hope you can answer all my doubts and questions, when you see this message and of course, when you free, trillion times thanks for your great help, please brother.
Surely you can use Dude! 😊👍
Just make sure to avoid high amp loads through this module. (1Ah max)
@@DIYwithBatteries correct me if I am wrong. I just read and Google. The 1ah is that mean brother you are saying to use 5v 1A phone charger to charge my battery into this module and don't use more than 1ah (5v 1a) ?????
@@snowy2875 Yeah that's perfect Dude! 👍
So whats the purpose of this module?
Can we charge the batteries with this?
You can reuse the old bms circuits from these flat cells 👍
Bhai replay dena jo Aap ne Battery Tod diya Wo damage ho gai thi.......
Ohh yes bro! the battery was expanded a little bit so i made a small hole on it, but now it's not useful anymore.
Thanks for watching my video Bhai...
HI, Can we charge lithium-ion battery with this module with a 5v mobile charger? please reply to me.
Yup! Didn't you watch the whole video Hah
Bro i watched entire video. It's awesome bro. But i had a doubt to clarify. Thanks for your reply. 😊😊
Kitne amh ka battery use kiya hai apne
~ 2000 mah
Hello bhiya kya hun samsung C7 ka battery say bana saktay hay ?
Ha je bana saktay hey! 👍
how we connect 3 module together
for 4 lion 3.7v batteries
The polarity should to be parallel if you are thinking to connect your batt in parallel & if it in series then de batt series too, but i don't know if you're going to use different modules
Anyway May be it could helps I think ✌
Does anyone know what the "T" pad is for?
Eh?
Samar vay a kitna volt deta hay, mezar karne se achcha hota,
Thanks bhai...I do.
bhai jaan samsung edge 7 battery ki stip tooth gi hai please uska method batye
Sabka battery method ek he hota he. Sirf Polarity change hosakta he... use Multimeter.
Thanks for checking out my channel bhai.....!
Ye mobile (3.7v) battery ki ek BMS protection Board 8.4 volt (2x18650→series→2x18650) ke sath use kar sakta hu kya ? Jaldi bataiye please.... 🙏
Ha bhai app use kar sakte hu! 👍
Circuit ke sath me connect karo
@@DIYwithBatteries
Lekin sunneme araha ki Lithium Battery pack ki 8.4v current ye mobile battery ki 3.7v module ko jala degi..!! Ye ho sakta he kya ?? 🤔🤔
@@Techie_Buddha You should try that bro, don't connect the battery directly just connect through the board because if anything goes wrong it have the short circuit protection 👍
@@DIYwithBatteries
Thank you Dear...🥰
Also, brother, if your this bm41 MI battery module can only take the 1AH 5v adaptor, in that case, can brother help and guide me like for example, what other battery module I can use for support 2AH charging? But anyway if I can use my 30,000mah li-polymer battery and solder with your this bm41 MI battery module, I also already VERY VERY happy and very much appreciated and thankful to you!!!! Heheheh
It depends on the module which you are disabled from mobile or any other things.
@@DIYwithBatteries Good afternoon to you, brother!!! you mean, but brother, in your expertise opinion, how do I know Which mobile phone has the most input charging battery module? Or the battery module able or not able to charge at 5v 2AH, is depending on the phone battery capacity I disabled down? For example, is it like, the largest phone battery capacity I disable their module down, should be able to hold 2AH input, and as for bm41 battery is only 2000mah, so, this bm41 module can only handle 1Ah power input?
How much volt battery can be charged
4.2v maximum
Realme C2 battery ka cannector belt tut gaya hai . Battery me kese pata kare bsi or btemp
Bms you mean hope you'll figure it out bud! 👍
With battary leble indicate
Brother, you are the final last hope I have, and you are the only person who know all the answer I want, so, I beg you please help me for this question, brother can you explain to me in layman term because I stupid and not very sure about the eletric. Brother, I don't understand what this two means:
I don't understand this two you say, brother, can please please explain to me in layman term
1) this module can handle only 1AH max and can "make sure to avoid 1amp loads"
2) so make sure to avoid more than 1amp loads
What does this two means, brother please please help me!!!!!
You can use it for any mobiles which can draw 1AH max... But if you use more than 1Ah load like example: LEDs, motors, or any other circuits.
You can charge your Panasonic batteries with 5V 1Ah mobile adaptor and don't use more than 5V.
I would like answer for your questions Buddy no worries. 😊👍
@@DIYwithBatteries OK brother!!!! Finally I fully UNDERSTAND what you say hahahaha, so sorry because i seriously don't know much about electric and so sorry sorry for I disturb and trouble you!!!!! I apologize to you brother!!
@@snowy2875 There is nothing to apologize.
Have a good day Buddy.👍
Brother may I ask, if let say I build a 20,000mah battery be it I use lithium 18650, or I use a 30,000mah LI-POLYMER powerbank, and I tear down, open up my 30,000mah powerbank, take out the 30,000mah li-polymer battery from my powerbank, and solder with your this battery module, can and safe or not? I mean if I glue 6 to 8 lithium 18650 behind my smartphone back case, is going to be very heavy. So I thinking, if I can use my 30,000mah li-polymer, instead of using the 8 x NCR18650B (Panasonic)
@@snowy2875 Better to use lithium polymer it's a little bit thin.
Bro can I charge 3.7v lipo battery with this circuit??
Plz reply.
Yes! You can also charge li-po batteries. 👍
@@DIYwithBatteriesAre u 100% sure?? ;)
@@arpitprakashiii-b5873 Yes Buddy. They are just made for those batteries. lol
@@DIYwithBatteries Yes bro just Jk ;)
mạch 3.7v lên 4 v
How to added charge leble indicate
I'm gonna make a video it 👍
Is ko nikalne ke baad battery charge hoti hai aur ise use kar sakte hai kya 🤨
Ha bhai you can use it but make sure with the polarity and voltage 👍
What is the full charge rate for your this testing bro
The battery will charge max 4.2v, and if it exits more than that this board will disconnects the power supply which were coming from the charger. And it also disconnects when battery is lower than the 2.75v(switch off). Think you got clarity. LOL
@@DIYwithBatteries Best of the best answer I ever had, brother!!!! See, I told you, you are still the best UA-camr among all the rest of them.
@@snowy2875 Common bruh 😂👍
Pahle wali battery fully hui thi na
It's supposed to cut off when the battery is low bhai...! ( pahle wali battery karab hua ta)
4volt acid battery me use kr skta hu
No!!! Lead acid battery (4v) jaldese charge hosaktha he 4.5v max.
P+ and p- its ok. but what is other pin ???? please some one explain
It's a temperature or a indicator status and simply a battery ⚠
@@DIYwithBatteries thx 👌
I will 1 few
3v cut off
Question again: how to wire, when on the same time: charging while a load is connected?? Regards, Jan
Yes! You charge it while the load is connected but the battery gets hot isn't it and the capacity drops too ¯\_(ツ)_/¯
What happened when a mobile charge connect to this battery
This board will act like a Tp4056 👍
Please reply, brother please please help me! :(
No worries Buddy just follow what I said.
Thanks for Honest comment 😊👍