Нағыз өнерлі іс, қолдарыңыз дерт көрмесін, деңсаулықтарына зиян келмесін, қолдарыңызға қол ғап киіндерші, ертең ұлғая ішкі құрылысы сыр бередіғой, сақтану жабдықтарын пайдалаңыз .Аман болыңыздар.
Very very impressive work. I am wondering about what kind of materials do you guys work with? No protective chemical working gears, yet very clean hands and skin. 👌👌👌⚒️
What impressed me the most was the fact he was slopping liquids from container to bucket and mixing then slopping it all over the moulds and yet his hands where totally clean 🤯
Please wear safety gadgets like mask+ gloves when working with fiber. My friend's health deteriorated after exposure to fiber mat while working. It's worse than asbestos. Great work guys.
this is very wonderful and i wish Allah's Guidance and prosperity. how i wish i can learn this to establish in my locality and employ youth to be self reliance
In all your video your painting but you did not endicated in video that what kind of chemical or paint your applying Water paint or oil paint or other Can you reply this
It's so much fun reading the comments on worker's safety from people typing into smartphones created by others who risked their lives for the materials they pontificate from.
Hello, thank you. Great and beautiful work. Can we know how to make the outer frame of this door? I think it is difficult. Can you make a video of it and how to install it?
Quando a gente acha que conhece tudo e aparece algo que nem fazíamos idéia que existisse, pelo menos aqui no Brasil nunca ví esse tipo de porta, talves exista e não percebemos por ser tão perfeito o acabamento!
Necessary is the mother of invention, wooden doors are expensive these days so they got this idea after making the fiberglass sheets. Made molds for door sheets and started doing this business. Thank you so much for your appreciation. Welcome to our channel.
@@SkillSpotter cok fazla uygulama alani olan bir meslek Tebri ederim 45 sene once fiber glas kuvette colsmistim yaptiginiz islemleri kullandiginiz malzemeleri anlatirsaniz memnunolurum tesekkur ederim
I'm an artist and architect and all I can say is wow. Hopefully when I build my simple dream house in the future, I'll hire you guys to make a main glass door like those!
@@freemanfreeman1086 It looks like Skill Spotter doesn't actually know the answer to your question and just randomly said PP to you, having seen it as the first of your suggested materials. PP would be most unlikely. The most probable candidate would be that it's a fibre glass mould.
Thanks a lot for your appreciation. These videos are only showing our viewers the skills of the talented persons who are making good products without high tech sources.
Нағыз өнерлі іс, қолдарыңыз дерт көрмесін, деңсаулықтарына зиян келмесін, қолдарыңызға қол ғап киіндерші, ертең ұлғая ішкі құрылысы сыр бередіғой, сақтану жабдықтарын пайдалаңыз .Аман болыңыздар.
Вы подняли хороший вопрос. безопасность необходима рабочему, я согласен с вами.
Большое спасибо за ваши ценные комментарии
@@SkillSpotter 🙏
Very very impressive work. I am wondering about what kind of materials do you guys work with? No protective chemical working gears, yet very clean hands and skin. 👌👌👌⚒️
Practice makes a man perfect.
Thank you so much for your valuable comment.
Прекрасная работа!берегите себя!Привет из Грузии!🖐🇬🇪❤️
I love the state-of-the-art factory floor and the impressive work carried out by these guys.
Thank you so much for your comment.
What impressed me the most was the fact he was slopping liquids from container to bucket and mixing then slopping it all over the moulds and yet his hands where totally clean 🤯
Practice makes a man perfect.
Thank you so much for your comment.
El buen trabajo es mantener limpias las manos y la ropa de trabajo
ماشاء اللہ ۔ زبردست
مشکور۔ Thank you so much
Felicitaciones saco mi sombrero ante tanto inspiración de creatividad saludos uruguay
Muchas gracias por sus valiosos comentarios para el trabajador, Love from Pakistan.
Interesting design concept, would make for far more interesting hotel hallways, and resurface existing,shabby doors , endless possibilities.
Thank you so much for your appreciation.
Welcome to our channel.
This is a Pakistan 🤫
@@SkillSpotter can you please mention the area and the details of this manufacturer,i would like to buy few
It’s really awesome work, specially very excellent the showroom 👍🏻👍🏻
Thank you so much for your appreciation.
@@SkillSpotter your most welcome, I’m from Bangladesh
Beautiful products. So sad to see no safety standards for the hard workers.
Thank you so much for your opinion.
Please wear safety gadgets like mask+ gloves when working with fiber. My friend's health deteriorated after exposure to fiber mat while working. It's worse than asbestos. Great work guys.
Good safety somitimes it's not safe i did thad
this is very wonderful and i wish Allah's Guidance and prosperity. how i wish i can learn this to establish in my locality and employ youth to be self reliance
Thank you very much for your valuable comment.
I am very sorry for replying very lately.
Great job guys but be safe ,we all know life is difficult be safe
Thank you so much for your appreciation and concerns.
Welcome to our channel.
Excellent work....
Next video door polish pe banaye
Acha lagega
Thank you so much dear.
We will try our best to make another video of polishing these doors.
Have you ever tried to fill with A-B component foam between faces? How sturdy do the doors feel?
Good idea !
These doors are cheaper than expensive wood.
Strong and water proof and suitable as interior doors.
Thanks for your comment.
In all your video your painting but you did not endicated in video that what kind of chemical or paint your applying
Water paint or oil paint or other
Can you reply this
This creative idea is I apriate it is very nice job please I need full information this type job is very useful for new generations
It's so much fun reading the comments on worker's safety from people typing into smartphones created by others who risked their lives for the materials they pontificate from.
Respect your opinion dear.
Hello, thank you. Great and beautiful work. Can we know how to make the outer frame of this door? I think it is difficult. Can you make a video of it and how to install it?
Yes dear we will bring a detailed video of the installation process of these doors.
Thank you so much for your comment.
Quando a gente acha que conhece tudo e aparece algo que nem fazíamos idéia que existisse, pelo menos aqui no Brasil nunca ví esse tipo de porta, talves exista e não percebemos por ser tão perfeito o acabamento!
Muito obrigado por seus comentários valiosos para os trabalhadores esforçados. bem vindo ao meu canal
se tiver deve ser uns 3mil cada uma
la a madeira vale ouro, aqui é pra queimar
Beautiful work with fiber glass
Thank you so much 😊
Welcome to our channel.
incredible work, what material is the blue mold made of??? , do you use a release agent like wax to remove the fiberglass sheet ??
Wow great invention for long lasting door in all condition of weather
Thank you so much for your appreciation.
Welcome to our channel.
Terimakasih sangat bermanfaat sekali 👍👍👍
🙏Salam dari Indonesia
Terima kasih banyak atas komentar berharga Anda untuk pekerja keras. wa alaikum assalam dari pakistan
Muuuuito lindo o trabalhor parabens 👏👏👏👏👏
Ручная работа, супер 👍
Спасибо большое добро пожаловать на мой канал
EXCELENTE TRABAJO, hasta donde la imaginación y la creatividad lleguen. FELICIDADES
Muchas gracias por sus valiosos comentarios.
Utilizan fibras para copiar la lámina .y queda el molde y así poder hacer más hojas de puertas
hello Skill Spotter's community , i have a question, what kind of materials do you use? for doors
Check description
@@SkillSpotter thank you for attention
This is a very good idea. How did you guys start, the inspiration for this idea?
Necessary is the mother of invention, wooden doors are expensive these days so they got this idea after making the fiberglass sheets.
Made molds for door sheets and started doing this business.
Thank you so much for your appreciation.
Welcome to our channel.
تلاشتان قابل تقدیر و ستایش است
شکریہ۔خوش آمدید
Itu cetakannya dari apaan yahh bingung saya sangat kreatif banget..👍
No gloves, no masks, no safety. Do you know how much is it dangerous?
Respect your opinion dear.
Welcome to our channel.
@@SkillSpotter It's not an opinion, it's an advice.
hamara eha eise hi hote 😂
Depends on the chemicals used. Looks like they are working in a well ventilated area to me.
@@mothanwrdz Ventilated área is not enough, inhale of the same way. They are touching the product also.
Интересно, хим. костюм идёт в комплекте с дверью или сразу белые тапочки???
Походу да...деревянный макинтош, Фукусима отдыхает...
@@ВладиславАбрамович-ц8ч там походу, деревянный, не каждому по карману, завернут в пакет из местной пятёрочки, подсушат и будут топить тандыр
Вы подняли хороший вопрос.
Weldone, great job ,
What are names of chemicals use?
Thanks a lot for your comment.
Chemical names are a trade secret of these guys.
Mantappp...
Smoga sukses selaluu...
Indonesia hadirr..
terima kasih atas pandangan Anda yang sangat penting dan berharga.
@@SkillSpotter
nggehhh sama sama...
.salam persahabatan slalu..
Гелькоут на солнце радует стиролом, до встречи в мультиках! И ещё кролики... Ваще жесть.
Those doors are as sturdy as a cardboard box.
Freedom of speech.
You are most welcome to give your opinion.
Installed, everything works, thanks!
Thanks a lot for your appreciation.
Welcome to our channel.
@@SkillSpotter cok fazla uygulama alani olan bir meslek Tebri ederim 45 sene once fiber glas kuvette colsmistim yaptiginiz islemleri kullandiginiz malzemeleri anlatirsaniz memnunolurum tesekkur ederim
Can you provide training for manufacturing
Yes sure you have to work with these guys for some time.
This video is from Gujrat Pakistan.
Good work Fellas. Thanks.
Thank you so much for your appreciation.
Welcome to our channel.
App mujia nbr digia mujia bi bnwana hi plez contect meee
Helloo skillspotter
Do you know the materials used to make Fiberglass door and share with us 🙏🙏🙏🙏
Am inspered to make a try
Wow. Very impressive.
Thanks a lot for your appreciation.
Fantastic job
Thank you very much!
Cửa bằng cách này dep và bền lắm Day nhé
Cửa bằng cách này dep và bền lắm Day nhé
Wow amazing
Thanks a lot 😊
ХОРОШИЕ ДВЕРИ, ЭТО ДЕРЕВЯННЫЕ. А ЭТО ПРОСТО КРАСИВО.
Спасибо, сэр, добро пожаловать на мой канал
@@SkillSpotter KAZAKHSTAN 🇰🇿 ♥️👋👍
What did you use as a binder for the wood( 2×2) & the skin. I need urgent respond please
Guys congratulations 👏👏
Thanks a lot for your appreciation.
Can I get your contact guys
Very beauty doors.
Thank you so much.
very good job bro.where it is?
Thank you so much this is in Gujrat Punjab Pakistan.
Donde puedo conseguir estos moldes para fabricar. Que compañía los vende? Me podrán ayudar con esa información. Es muy bonito su trabajo
bienvenido a mi canal, acabo de crear un video, puedes buscar en línea
سؤال جيد شكرا
Adorei o resultado. Maravilhoso trabalho.
sim, obrigado por suas apreciações
@@SkillSpotter Adoro.
Kon kon es channel pr social list ke recommendation ke baad aaya h
Thoko like👍👍👍🙏🙏
Welcome to our channel.
Thank you so much for your comment.
Very nice idea 👍👍
You engraved the Table on what material ?
Is it wood or something else ?
Thanks
Thank you so much.
That material is plastic.
Very nice work
Thank you so much for your appreciation.
Welcome to our channel.
Very good sir ji
Thanks a lot dear.
bahut hi badia kmaal kar ta bai
Thanks a lot dear.
Lucen hermosas y muy originales, que bonitas están.
gracias por sus puntos de vista muy importantes y valiosos.
How strong are these doors? They look impressive though
These are strong enough for indoor use.
خیلی عالی بود از کدام کشور هستید
خیلی ممنون برادر من اهل پاکستان هستم
So great
Thank you so much for your comment.
ยอดเยี่ยมชอบมากครับ
ขอบคุณมากสำหรับความคิดเห็นอันมีค่าของคุณสำหรับคนทำงานหนัก
Very good work, please how can I get the template ?
Excelente, ❤❤🌈👽👍
Thank you
I would like what masterials you use and in what proportion. Or how can I contact you and compensate you for your recipe?
where can I learn to start this business?
I'm an artist and architect and all I can say is wow.
Hopefully when I build my simple dream house in the future, I'll hire you guys to make a main glass door like those!
Thank you very much for your appreciation.
You are very much welcome.
@@SkillSpotter Do you guys make frosted stained glass with chiseled flower decorations?
C'est magnifique
Merci beaucoup et vraiment désolé pour la réponse tardive.
MIS RESPETOS 💕💕💕💕💕... UNOS VERDADEROS GENIOS!!!!!
Muchas gracias bienvenida a mi canal(feminine)
Great video
Thank you so much for your appreciation.
Отличный результат
Buenas noches por favor cual es la material qué colocan en midio de las planchas de vibra de vidrio
Espuma de poliuretano
Now that's was impressive.
Thanks a lot for your appreciation.
Welcome to our channel.
Styrofoam solves in thinner, how come they use it as filler?
complimenti spettacolare.
grazie mille per l'apprezzamento,
So nice
Thank you.
Muito bom!🙂🙂🙂
obrigado. Senhor, eu realmente gosto do seu interesse.
@@SkillSpotter these are real men at work 👍brilliant
What is the material you guys use
Respekt! Gute Arbeit !
Ich bin Ihnen sehr dankbar für Ihre Wertschätzung
Very helpful for self employment
Thank you so much for your interest and appreciation.
Is this door are so strong as we need?
Yes dear if you use it as a door carefully its ok.
Its good quality and water proof also.
For burglars with no battery powered saws, it's fine.
Such a nice work 🔥
Thanks a lot dear.
where can buy master mold guys
'Now i know how Mr. James Bond jumped through your doors, Dr. No.'
Thank you so much for your opinion.
Wonder how many air pockets there is just below the gel coat and fibre glass
While locking and pressing in the press mechanism air pockets were removed.
Thank you so much for your comment.
Welcome to our channel.
amazing Skill 💙💚❤
Thank you so much dear.
Ассалом алайкум
Nice... Kaise milega ?
Авиационные технологии какие-то)!
Хорошая точка зрения
what material is the mold made of?
Hard Plastic.
Thank you so much for your comment.
@@SkillSpotter pp, pe, abs? Which?
PP
Thanks
@@freemanfreeman1086 It looks like Skill Spotter doesn't actually know the answer to your question and just randomly said PP to you, having seen it as the first of your suggested materials. PP would be most unlikely. The most probable candidate would be that it's a fibre glass mould.
Great work
Thank you! Cheers!
Hello sir, what kind of materials they use. i need the name of substances
Hi dear, They didn't disclose the formula with us as a trade secret.
So i just created a video of the work .
EXCELLENT
Thank you so much for your appreciation.
Fantastic video but no written or verbal explanation
Thanks a lot for your appreciation.
These videos are only showing our viewers the skills of the talented persons who are making good products without high tech sources.
Sir apka factory kha pr h...
Gujrat Pakistan
Bhai sad labours lefty hein kya
I love to learn this technology. How can I do that please?
Thanks a lot for your interest.
We will try to make another detailed video.
What are the materials required ?
D result is too good but as for der owners dey shud provide dem some safety...
Respect your opinion dear.
Welcome to our channel.
Thanks
Pretty. For an inside door great, but an exterior door, not so much. A kid could literally kick through it. lol
Thank you so much for your appreciation.
Welcome to our channel.
good
Thanks. مشکور
Hello, what kind of technology is there in Uzbekistan? Can we leave the production alone? Will they help?
This video is from Punjab Pakistan.
it is necessary to start the production of this house in Uzbekistan
How much does one 210x90 cm door cost?
which social network can I contact you through