Thank you for the video; I recently acquired one of these PEQ-15 replicas in an Amazon restock shop (no case) and from this video deduced that it’s probably an Element, down to the reversed battery setup. I actually popped the thing open and resoldered the battery terminals to make it fit correctly, as it wasn’t getting a good connection for the battery or the main laser. The video was a lot of help!
I bought one of these and took it on deployment to Afghanistan and it was amazing! Always held zero and took whatever I through at it!........ Said no one ever!
@Steve Qi Truthfully it's nothing against these units themselves, but in the end, most people want something that performs like a $1000 piece but only costs 80 bucks. Which is why you'll never hear what I said in my original post. You get what you pay for. If you're gonna run it hard and train with it, then when the balloon goes up, use it to defend yourself, Spend the money. But If you want something that "looks cool" but is mostly a wall hanger and something you can show off to your friends that don't know anything about guns at all and they think you have cool expensive stuff. Then these are great. But I've learned my lesson and you can't spend 1/10th the money and expect 10 times the quality. Buy once cry once.
Yea people think just as long as they train enough they can be just as good and really they’re mostly right but they don’t consider the fact that if the thing straight up is not reliable what’s the point on all that training so yes training ultimately is the best thing you can do but reliable equipment is also a factor
Plus now lookin at it it’s air soft so yeah go ahead and by the 80$ unit I’m just pointing out to those who think this might make a great permanent attachment to real fire arms they are wrong
You and the rest of meal team 6 are never going to be in a situation where it will ever take the abuse of being handled by a grunt for years. These are perfectly fine for civilian use.
FMA's light is WELL beyond that of the Element peq. It looks like its about 250-300 Lumens while the Element's light looks about 100-150. Light matters most imho...
Cody McDonald that's insane to even consider that. An since you are. The $4500-5500 or so for the real pvs an the real peq is out of your price range to think of putting airsoft on any rifle
Why is everybody so butt hurt about putting a replica peq on a real rifle. I don't plan on having NVG's so who cares. I just want one for looks and a place holder. I just like the look for my mod 0
The FMA is one way brighter I have two and yes on REAL AR's. One I have is just as bright as my Surefire Scout and it is a real Surefire. This guy hates on the FMA but it is way better dosen't mention how way brighter the FMA is
to ME the element is lacking in looks you can see the seam between the two halves to make the body. ALSO imho (in my humble opinion) people think the element looks better because its bigger. It's standard human nature to want a bigger piece.
Great review man, but you didn't plug in the provided pressure pad, and see if the laser is a toggle on/off switch like the fma (deal breaker for me personally, too dangerous) or if its a momentary switch like the vfc. I own the vfc version, I've never had any problems with it, price is a bit steep though.
I've been using a Sightmark Lopro Green Laser Designator, and it's served me very well - but only offers a really nice green laser. I'm looking into a few IR capable devices right now, but the temptation to just buy a VFC PEQ-15 or something similar has always been there. Huh.
***** Yes, I'm familiar with the Solomonensis and InvisibleSight ATPIAL and DBAL units, as well as the G&P DBAL. I was simply saying that I'm frequently tempted to buy a VFC PEQ-15 just for that nostalgia.
OK, I don't have sound and UA-cam subtitles are a mess as usual... So who wins in term of lumen power and durability ? Element or FMA ? That's the only reason why I hesitate. I want to get the one that has the stronger light. Thank you for the video !!
do you need an extra mounting kit on these or do they just clip on? None of these videos actually show how they are mounted and what the mounting is actually like..
Lack of zeroing is a deal breaker. Unless that's done by the screws. However I'll buy something functional rather than decorative as it's for a crossbow.
Re: Crooked mount... There is no way to fix crap like that (easily). Makes you wonder about quality of switches, internals if the Chinese let such obvious flaws out the door. Not a minor flaw either... if it's crooked is going to affect where laser(s) point. I was reading some info from a guy who was importing Clone Scopes.. when he ran the numbers REJECT rate was 75%. He said while BOX was marked "Inspected" it was quite obvious NOTHING was.
fma seems better to me. flashlight is much better and it has strobe. Who gives a damn if the covers sre plasticy feeling? its the funtion that matters. FMA all the way
Jonathan Ford I've seen some people run them on real AR'S . Mostly for looks. The element if I'm not mistaken, has another setting if you remove the blue screw. It's also supposed to have a ir illuminator. The flashlight cap is a ir cap. Not sure how good they will work though. Thought about getting one and trying it for hog hunting,but didn't want to waste money on something that's actually a toy. If you want a good green laser, laserlyte cm-15 Is a good one. I just got 2 off eBay. You can actually see the beam during low light. At night it's really bright. The beam goes on forever. If you're looking for an IR illuminator I use a Surefire with the Illuminator cap. And I also use the Insight m3x with an Illuminator cap. They don't make the laserlyte cm15 or the Insight m3x long gun light anymore, but you can find them on eBay. Hope this helps, good luck
The purpose of a light it to mainly blind your target. If i did airsoft if use either but im lookin to make my gun perty and beat shit up so ill do the fma.
what can you recommend on the two peq15 replica? VFC or this Element? I own two VFC peq15 replica and one is already functioning weird. how this element holdin up? any feedback? planning to purchase one soon by the way nice video comparison with the FMA. hope you can make one vs the VFCs
How does this compare to the VFC PEQ-15? I know this the LA-PEQ15 and the VFC is the AN-PEQ15, but would like to hear your thoughts since it seems like you own both.
I have recently bought the FMA. The up and down adjustment works, however the left to right doesn’t or so it seems - I’m using the nob on the right angled side by following the manual. Is this right? Anyway to fix this? Edit: I have the FMA ‘AN’ PEQ15 where there is a working IR laser also. But still it’s the same product pretty much. Didn’t know if the adjusters have issues in these also
Pretty much all of the replica PEQ-15s have adjustment issues. There have been guides posted on some of the airsoft forums, so you might try searching for one of those.
PLEASE HELP I have the element PEQ and how did you straighten it out? On my rifle the right side (light side) is a bit elevted and dose not lay as flat as I would like it to be. Let me know Thank you
Oh I have one of those peqs myself and it uses Cr123a batteries and those batteries are very much the standard battery for most air soft attachments as well as real steel attachments
シTheCødyMavrick2.0ツ real versions of these PEQ-15’s have infrared capabilities, meaning they emit and laser which is invisible to the naked eye. They’re used to aid in aiming the weapon when under night vision since it is notoriously difficult to use your day optic while using night vision. The infrared laser lights up like beam under NOD’s making it significantly easier to aim.
If you are looking into a good Peq 15 I would recommend the fma la5-c! Remember to zero it parallel to you Point of impact and not to your sight! You should really mod the one you finally buy no matter wich it is! I would personally buy the la5-c as stated!
Re: : PEQ-15 and other models that won't turn on, or have died. Here's the deal.. Some good stuff comes from China, but AIRSOFT crap is exactly that, especially on items that are NOT rated for use on REAL FIREARMS. (You AIRSOFT guys need to get behind AIRSOFT items being used on REAL FIREARMS vs getting abusive when people ask such.) On AIRSOFT stuff, it gets the same respect as TOYS for 4 year olds being assembled, if AIRSOFT stuff was firearm rated you'd see stuff being more durable and being made to a higher standard... there would be some effort put into quality control. The mindset is "We make lots fast, fill up shipping container fast as possible, No time to check for bad, we don't care as buyer pays return shipping cost on defective stuff.. big ha-ha :-)" As a example of ZERO QUALITY CONTROL, as a example what kind of moron would install a mount that was cast crooked as shown on the replica PEQ on the right ? All those mounts should have been rejected, and thrown in scrap metal bin, PERIOD. Options: 1: Take unit apart and inspect the soldering. Hope it's just a bad solder. 2: Return to vendor. 3: If vendor won't work with you... Via PayPal you have 180-days to force a exchange / get your money back. Note that PayPal wants YOU to return JUNK to vendor, You pay for return shipping. (I have a problem with that on DEFECTIVE ITEMS, I think seller should pay return shipping if they want the junk back... but good luck on that.) 4: If PayPal, /seller /vendor etc jerks you around do a CHARGE BACK via your Credit card. 5: Related.. when using a credit card if item is stated as having a warranty alot of time warranty period is increased /doubled.... and some have provisions to have the item repaired.. If item to repair exceeds worth = instant refund.
Anyone of you guys will think this would hold up on a real riffle? Dont wsnt function just for looks since I dont run NV and want it for cloning on my block 2
MaceGaming53 nah thats a fake one, I mean a real peq15, obviously you cant get the ones the military uses, but they just came out with a civilian version.
+ZzBiohazzardzZ I used the real deal for years...I promise you they aren't that cool. Completely useless if you don't actually have any night vision. The red vis laser is very weak, and is only good in low light as well. The real deal is expensive because it is a high output laser in a small, rugged case which holds a very accurate zero even after taking a beating. Real deal also has an IR floodlight instead of a flashlight.
IR Lasers are not visible but by NODS....so thinking that you are seeing the IR with your naked eye is 100% wrong, not to mention, it wasn't on that setting. Just lettin ya know
You can see these IR emitters, but not the lasers themselves probably because they're low-end replicas. But, yes, IR lasers are only visible with NODs.
Can you nit get the real deal? Take them stickers straight off... If that metal ain't straight it's not going to aim straight.. it will still slot on the rail allgood
@@e.alexander1869 Soo if I put the fma on my AR shooting 556, it won't fuck up the laser or light? Because after all it is on the side top or bottom!!! Sooo how would it break!???
I died laughing when he said “always tasty” about the gel
2:30 PACKAGING REVIEW FINISHES, NEW RECORD!
2:43
Heros
Thank you for the video; I recently acquired one of these PEQ-15 replicas in an Amazon restock shop (no case) and from this video deduced that it’s probably an Element, down to the reversed battery setup. I actually popped the thing open and resoldered the battery terminals to make it fit correctly, as it wasn’t getting a good connection for the battery or the main laser. The video was a lot of help!
kind of upsets me how they don't replicate the real type plug...
Ya im glad. One less thing to worry about when buying used and some prick is trying to scam ya
I bought one of these and took it on deployment to Afghanistan and it was amazing! Always held zero and took whatever I through at it!........ Said no one ever!
@Steve Qi Truthfully it's nothing against these units themselves, but in the end, most people want something that performs like a $1000 piece but only costs 80 bucks. Which is why you'll never hear what I said in my original post. You get what you pay for. If you're gonna run it hard and train with it, then when the balloon goes up, use it to defend yourself, Spend the money.
But If you want something that "looks cool" but is mostly a wall hanger and something you can show off to your friends that don't know anything about guns at all and they think you have cool expensive stuff. Then these are great. But I've learned my lesson and you can't spend 1/10th the money and expect 10 times the quality. Buy once cry once.
Yea people think just as long as they train enough they can be just as good and really they’re mostly right but they don’t consider the fact that if the thing straight up is not reliable what’s the point on all that training so yes training ultimately is the best thing you can do but reliable equipment is also a factor
Plus now lookin at it it’s air soft so yeah go ahead and by the 80$ unit I’m just pointing out to those who think this might make a great permanent attachment to real fire arms they are wrong
You and the rest of meal team 6 are never going to be in a situation where it will ever take the abuse of being handled by a grunt for years.
These are perfectly fine for civilian use.
FMA's light is WELL beyond that of the Element peq. It looks like its about 250-300 Lumens while the Element's light looks about 100-150. Light matters most imho...
The light on a PEQ-15 isn't supposed to be used as a weapon light. So, using the illuminator as a reference for comparison is wrong.
+Extraordinaire Oh Okay. Just for your personal input. Would you recommend either for a real rifle? Temporary use.
+Extraordinaire Oh Okay. Just for your personal input. Would you recommend either for a real rifle? Temporary use.
+Cody McDonald Nope. I would never put replica items on a real rifle.
Cody McDonald that's insane to even consider that. An since you are. The $4500-5500 or so for the real pvs an the real peq is out of your price range to think of putting airsoft on any rifle
Why is everybody so butt hurt about putting a replica peq on a real rifle. I don't plan on having NVG's so who cares. I just want one for looks and a place holder. I just like the look for my mod 0
I'm putting one on my ar and it's a FMA! You think it will do alright?
The FMA is one way brighter I have two and yes on REAL AR's. One I have is just as bright as my Surefire Scout and it is a real Surefire. This guy hates on the FMA but it is way better dosen't mention how way brighter the FMA is
If your putting a fake one on a real rifle tells me you probley also have the bottem of the barrel rifle also
@@AquaTech225 If your grammar is that bad, it tells me you probley also have the bottem of the barrel rifle also.
MitchTorii14 that’s called driving responding with one hand not really giving a fuck. Peasant
tube batteries always position the negative on the spring
The actual PEQ has a similar light color on the battery cap. The caps on the light are actually plastic as well. It's been a while since I used a PEQ.
Also, those blue screws block the higher power settings. You remove them to get higher mW.
For real???
I'm not giving you hate, but when you have it on some settings you need to pressure switch attached. Just giving some advice.
Felt like this comparison was a bit biased.
Bias in the sense that the Element is better? Because it is.
fr😂
+Extraordinaire absolute savage haha
Big time
@@ExtraordinaireThe absolutely not. You can't see the light is way better. I always liked Element when I was airsofting but bro that is weak
No idea if you’re still around mate, but what battery does the element take? Just got mine and didn’t come with one
CR123A
@@ExtraordinaireThe thanks a bunch!
Good job on putting in the batteries lol
😂 I knew as soon as he chucked them in that he'd put them in the wrong way lol
AN/PEQ = Aim Neutral/Photo-Electric Quartz
15 = model number
Actually its ARMY/NAVY
to ME the element is lacking in looks you can see the seam between the two halves to make the body.
ALSO imho (in my humble opinion) people think the element looks better because its bigger. It's standard human nature to want a bigger piece.
Great review man, but you didn't plug in the provided pressure pad, and see if the laser is a toggle on/off switch like the fma (deal breaker for me personally, too dangerous) or if its a momentary switch like the vfc. I own the vfc version, I've never had any problems with it, price is a bit steep though.
A slight oversight there. I will upload a video showcasing the functions with the switch. The Element has a neat trick. ;)
I've been using a Sightmark Lopro Green Laser Designator, and it's served me very well - but only offers a really nice green laser. I'm looking into a few IR capable devices right now, but the temptation to just buy a VFC PEQ-15 or something similar has always been there. Huh.
***** Yes, I'm familiar with the Solomonensis and InvisibleSight ATPIAL and DBAL units, as well as the G&P DBAL. I was simply saying that I'm frequently tempted to buy a VFC PEQ-15 just for that nostalgia.
OK, I don't have sound and UA-cam subtitles are a mess as usual... So who wins in term of lumen power and durability ? Element or FMA ? That's the only reason why I hesitate. I want to get the one that has the stronger light. Thank you for the video !!
Chenglish, nice. Very realistic though. Definitely have to rely on the pictures.
do you need an extra mounting kit on these or do they just clip on? None of these videos actually show how they are mounted and what the mounting is actually like..
I get the element. Very happy with it. Zeroed in perfectly
What kind of batteries are those!?????
Streamlight CR123A
Where can i buy a real peq 15 as a civilian
atpial
Lack of zeroing is a deal breaker.
Unless that's done by the screws. However I'll buy something functional rather than decorative as it's for a crossbow.
You hunting with a crossbow under nods?
"That's always tasty"
Can you zero the lazer? Like adjust it left and right or up and down? Im looking forward to your reply thank you, nice vid.
great video, cheers from Brazil ! so, i have the Element LA5 PEQ 15 for airsoft, can you tell me if it is waterproof/ water resistent ?
Buddy it isn't water resistant, took it apart a day ago and there are no rubber seals or anything to prevent water sipping in
Got the Element PEQ-15 and mine had the crooked mount. Were you able to fix it? if so I'd love to know.
Re: Crooked mount... There is no way to fix crap like that (easily). Makes you wonder about quality of switches, internals if the Chinese let such obvious flaws out the door.
Not a minor flaw either... if it's crooked is going to affect where laser(s) point.
I was reading some info from a guy who was importing Clone Scopes.. when he ran the numbers REJECT rate was 75%.
He said while BOX was marked "Inspected" it was quite obvious NOTHING was.
fma seems better to me. flashlight is much better and it has strobe. Who gives a damn if the covers sre plasticy feeling? its the funtion that matters. FMA all the way
But the strobe is slow, and broke on mine, the purpose of a strobe is to make a blinding epilepsy
Kyler Noe yeah, 90% of people could probably could probably button bump faster than the FMA strobe
mason b FMA are built very cheaply
@432fuuzz exactly just pair it with m600c
I'd rather buy one of these then spend 1400+ on a L3 EOTech peq15, I run night vision a lot
Ok but it doesn’t have an ir illuminator and if it’s going on a real firearm don’t it’s not a good investment
What batteries did you use?
Nice comparison! How do you think that Element LA-5 holds up against the VFC peq ?
May be a dumb question but has anyone ran this on an actual AR15, if so does the laser hold zero? And what lumen are the lights? Thanks guys
Jonathan Ford I've seen some people run them on real AR'S . Mostly for looks. The element if I'm not mistaken, has another setting if you remove the blue screw. It's also supposed to have a ir illuminator. The flashlight cap is a ir cap. Not sure how good they will work though. Thought about getting one and trying it for hog hunting,but didn't want to waste money on something that's actually a toy. If you want a good green laser, laserlyte cm-15 Is a good one. I just got 2 off eBay. You can actually see the beam during low light. At night it's really bright. The beam goes on forever. If you're looking for an IR illuminator I use a Surefire with the Illuminator cap. And I also use the Insight m3x with an Illuminator cap. They don't make the laserlyte cm15 or the Insight m3x long gun light anymore, but you can find them on eBay. Hope this helps, good luck
The purpose of a light it to mainly blind your target. If i did airsoft if use either but im lookin to make my gun perty and beat shit up so ill do the fma.
Nice comparison there bud.
what can you recommend on the two peq15 replica? VFC or this Element?
I own two VFC peq15 replica and one is already functioning weird. how this element holdin up? any feedback? planning to purchase one soon
by the way nice video comparison with the FMA. hope you can make one vs the VFCs
Which batteries does the element take
lithium cr123a batteries 2 of them
How does this compare to the VFC PEQ-15? I know this the LA-PEQ15 and the VFC is the AN-PEQ15, but would like to hear your thoughts since it seems like you own both.
I have recently bought the FMA. The up and down adjustment works, however the left to right doesn’t or so it seems - I’m using the nob on the right angled side by following the manual. Is this right? Anyway to fix this?
Edit: I have the FMA ‘AN’ PEQ15 where there is a working IR laser also. But still it’s the same product pretty much. Didn’t know if the adjusters have issues in these also
Pretty much all of the replica PEQ-15s have adjustment issues. There have been guides posted on some of the airsoft forums, so you might try searching for one of those.
Extraordinaire ok thanks il take a look!
Between looks and quality which one would u chose overall.
PLEASE HELP I have the element PEQ and how did you straighten it out? On my rifle the right side (light side) is a bit elevted and dose not lay as flat as I would like it to be.
Let me know
Thank you
6xtbirk buy a real one
What kinda battery does this take?
Would you recomend the Element over the vfc or FMA?
I would like to see the cost of each item and where to buy
Wish
Can anyone explain the use of the blue screws please?!
from a lumen standpoint, how bright are these two devices?
How bright are they at night? Will they light up a hall way
I was rooting for the element.. but damn the FMA seemed to out perform the element.. the illuminator was a lot brighter on the fma
5:04 Batteries wrong side in. RTFM! Who needs the fucking manual? Simple answer:"You Sir"
I’m new to the community, what batteries are you using?
Oh I have one of those peqs myself and it uses Cr123a batteries and those batteries are very much the standard battery for most air soft attachments as well as real steel attachments
the best an peq is FMA, Element LA-5 or VFC PEQ15 ? (for red hot laser and IR laser)
What kind of batteries are those
Cr123a batteries
Which has a brighter light illuminator?
Which one has stronger IR capabilities?
Ej Sykes The element is the only one with IR
RivalsAirsoft3 the fma has it aswell
what is IR?
Can anyone answer for me.. but is the FMA peq15 adjustable for hight and width for the laser or so?
can you zero the lasers at all?
FMA!
Did you try them with the filters on?
where i can buy the battery ? of the LA 15
Nice video!!
Can you actually adjust the laser on the element?
Would love to know myself. Been through 2 FMAs so far.
Love this review.
How's your experience with shootercb gear?
I recommend them personally. They ship quickly compared to other asia airsoft stores.
So is the replica IR?
I dont really know much at all about this, what are they meant to be replicas of, arent they just laser sights?
シTheCødyMavrick2.0ツ real versions of these PEQ-15’s have infrared capabilities, meaning they emit and laser which is invisible to the naked eye. They’re used to aid in aiming the weapon when under night vision since it is notoriously difficult to use your day optic while using night vision. The infrared laser lights up like beam under NOD’s making it significantly easier to aim.
where can I get replacement pressure switch for the fma Mike broke
Where can I get the element
So does this actually have a IR laser that works? Seen with NVG
Yes I tested it with my nods
dude .... whats with the constant going on about the packageing ....its going in the bin ...
do you have any link for the element one?
TheMrTaco www.evike.com/products/94693/
I’m aware I’m a little late, but I hope this helps
@@wakeless_place just a little 4 years kate
so i have the fma can u adjust it or no like the laser
can you adjust the laser up, down, L and R on the element?
yes
Where did you get them???
Elias Totoli amazon.com
Can you zero the IR on the element?
joerAE86 I think the laser an IR is connected in that way that if you zero one the other follows
If you are looking into a good Peq 15 I would recommend the fma la5-c! Remember to zero it parallel to you Point of impact and not to your sight! You should really mod the one you finally buy no matter wich it is! I would personally buy the la5-c as stated!
Looks bigger for sure
Can you throw these across the room a couple times and see if they work?
They barely work out the package.
Why do you want to do that though?
My friend have element peq-15 same as you and it wont function he tried the battery both ways and still not working, do you have any suggestion?
Crusader Matilda burn it!
Re: : PEQ-15 and other models that won't turn on, or have died.
Here's the deal.. Some good stuff comes from China, but AIRSOFT crap is exactly that, especially on items that are NOT rated for use on REAL FIREARMS.
(You AIRSOFT guys need to get behind AIRSOFT items being used on REAL FIREARMS vs getting abusive when people ask such.)
On AIRSOFT stuff, it gets the same respect as TOYS for 4 year olds being assembled, if AIRSOFT stuff was firearm rated you'd see stuff being more durable and being made to a higher standard... there would be some effort put into quality control.
The mindset is "We make lots fast, fill up shipping container fast as possible, No time to check for bad, we don't care as buyer pays return shipping cost on defective stuff.. big ha-ha :-)"
As a example of ZERO QUALITY CONTROL, as a example what kind of moron would install a mount that was cast crooked as shown on the replica PEQ on the right ?
All those mounts should have been rejected, and thrown in scrap metal bin, PERIOD.
Options:
1: Take unit apart and inspect the soldering. Hope it's just a bad solder.
2: Return to vendor.
3: If vendor won't work with you... Via PayPal you have 180-days to force a exchange / get your money back. Note that PayPal wants YOU to return JUNK to vendor, You pay for return shipping. (I have a problem with that on DEFECTIVE ITEMS, I think seller should pay return shipping if they want the junk back... but good luck on that.)
4: If PayPal, /seller /vendor etc jerks you around do a CHARGE BACK via your Credit card.
5: Related.. when using a credit card if item is stated as having a warranty alot of time warranty period is increased /doubled.... and some have provisions to have the item repaired.. If item to repair exceeds worth = instant refund.
can element laser visiable at daylight ?
I've seen some FMA Peq 15s on ebay for 499.00 to 500.00. Are those legit or just real nice replicas
Those are probably the LAB models, which are nicer replicas. You can usually get them for around $300 though.
Why is the VFC so much more expensive than the Element?
What type of batteries are those??
CR123
Is the FMA smaller? It looks smaller.
It is. More skinnier than the Element. I like things big. Like I like my cheeseburgers big.
Is there a general name for these types of lasers?
PeanutButterJellyChickenTuna Sandwach I Think PEQ-15
Thanks!
How come he never posts videos of his games at american milsim events and stuff
he just has the contour for looks duh
Fool Meister Or, as I've said numerous times in my videos, I simply do not play bbwarz.
***** ya I heard you in the last few videos about not being able to go as much I'm just joking
Wait so whats the point in having all that gear
Chris Manning Jr. Because it's cool?
that's for airsoft use only
really?
can they be used on real weapons?
Elimo hf probably not well but I've seen it done a lot
The real question is why put this fake ass junk on any real rifle
airsoft use only
Anyone of you guys will think this would hold up on a real riffle? Dont wsnt function just for looks since I dont run NV and want it for cloning on my block 2
I'm thinking the same thing. I have a 300 blackout so it would probably break lol
which of the two would you recommend? which of the two works best with nvg?
Element since it has an ir laser unlike the fma and trust me I have nods and visible don’t work with them
How do you buy a real one.
+ZzBiohazzardzZ You save up $1,500 and then go to TNVC.com
***** ah ok.
+ZzBiohazzardzZ
www.airsoftgi.com/product_info.php?products_id=20287
MaceGaming53 nah thats a fake one, I mean a real peq15, obviously you cant get the ones the military uses, but they just came out with a civilian version.
+ZzBiohazzardzZ I used the real deal for years...I promise you they aren't that cool. Completely useless if you don't actually have any night vision. The red vis laser is very weak, and is only good in low light as well. The real deal is expensive because it is a high output laser in a small, rugged case which holds a very accurate zero even after taking a beating. Real deal also has an IR floodlight instead of a flashlight.
I mind you the real ones are in the 1000's hahaha and he has two 😂😂😂
Quentin Steelman yes two fake pices of trash
IR Lasers are not visible but by NODS....so thinking that you are seeing the IR with your naked eye is 100% wrong, not to mention, it wasn't on that setting. Just lettin ya know
You can see these IR emitters, but not the lasers themselves probably because they're low-end replicas.
But, yes, IR lasers are only visible with NODs.
Can anyone here confirm if the IR laser works on the Element? I need a little something to help aiming when i run my night vision.
Jari Hohtari there's videos of the ir laser,& yes it works
The element ir laser works under my nods
Can you nit get the real deal? Take them stickers straight off... If that metal ain't straight it's not going to aim straight.. it will still slot on the rail allgood
There Eotech PEQ and they run for 1300
i dont know what these things are, but i feel like i want one
These are junk. The real things are used on rifles as red lasers, lights, and infrared illuminator.
@@jamesstephenson2346 they aren’t junk, they’re just replicas made for airsoft use so you don’t have to spend in the thousands for a real one.
@@jamesstephenson2346 and the replicas function exactly like the original
What batteries?
Cr123a
CAN YOU USE THESE ON REAL RIFLES? CHAMBERED IN 5.56?
No
You probably shouldn't put any replica things on real steel firearms.
You will probably lose zeroing after firing. Also, it probably won't hold for long.
sheldon russell If you don't care about a zeroed laser, go ahead. 5.56 doesn't have much recoil anyhow, it won't break
@@e.alexander1869 Soo if I put the fma on my AR shooting 556, it won't fuck up the laser or light? Because after all it is on the side top or bottom!!! Sooo how would it break!???
good day buddy where did you buy those your item?