How to setup the KK2.0 board to show the battery voltage (LIPO)

Поділитися
Вставка
  • Опубліковано 28 лис 2024

КОМЕНТАРІ • 19

  • @Painless360
    @Painless360  11 років тому

    Thanks for the comment. The way that I've fought with the latest build- having everything on 3.5mm bullets and non soldered connections - has reduced the swearing (slightly!). Happy flying!

  • @SelimTargay
    @SelimTargay 10 років тому

    Thanks, very informative. New to this and I couldn't for the life of me figure out how things are powered.

  • @toddleshane
    @toddleshane 10 років тому

    Wonderful resource. Thanks a million! Now I won't be tempted to keep flying :D

  • @TerminalTwo
    @TerminalTwo 10 років тому

    Is it safe to connect the positive terminal of a 4S Li-po? I am afraid, because the voltage goes upto 16.8 volts

  • @BenPortmanlewes
    @BenPortmanlewes 11 років тому

    Great stuff, I soldered directly to the board, but then I'm abit chavey on my builds

  • @Na5ru
    @Na5ru 10 років тому

    great video so there is no need of negative /GND wiring?

    • @Painless360
      @Painless360  10 років тому

      That's right, the ground is common throughout the system and the board uses the ground from the ESC/UBEC leads. Thanks for asking.
      Happy flying!

  • @AndyRCchannel
    @AndyRCchannel 9 років тому

    my kk2 doesnt have that pin. has the board changed since this vid?

    • @Painless360
      @Painless360  9 років тому

      AndyRC watch the video from 1:37, you will see that my board didn't have it either..
      Happy flying

  • @ranjeety46
    @ranjeety46 7 років тому

    what battery should connect for long flight duration with 2300 kV motor

    • @Painless360
      @Painless360  7 років тому +1

      Impossible to answer without knowing a lot more. See the videos about power, thrust and motors in the 'Introduction to Remote Control' series.. Hope it helps.

  • @ranjeety46
    @ranjeety46 7 років тому

    I have confussion how to supply current to flight controller it required 5v but I want to connect my quadcopter with 11 v battery
    spec:-
    ESC - 30A
    motor- 2300kva
    flight controller kk2.15 evo
    Receiver- 9ch

    • @Painless360
      @Painless360  7 років тому

      See the videos in the 'Introduction to remote control' series and the 'Quadcopter building for beginners' series on the channel too - both of those have all of the basics to help with a new build.. Best of luck!

  • @guruji243
    @guruji243 7 років тому

    Hi what about mini kk? Thanks

    • @Painless360
      @Painless360  7 років тому

      No idea, sorry. I moved away from the KK series about 3 years ago.. Best of luck!

  • @johnmcdonald7644
    @johnmcdonald7644 8 років тому

    Chewbacca

  • @johnmcdonald7644
    @johnmcdonald7644 8 років тому

    Wookie