I am using this with a 4l60e, works perfect however, i have set up my single leds and programmed it, but when its operating the leds are all on and the gear i am in slightly brighter. Is this correct, as i have wired the DIM to my parkers like in wiring diagram but when they are on the others shine so bright you cant tell what gear you are in. So should it be wired to the actual cluster dimmer or is there something wrong?
Good day, My apologies for the delay in response. I would recommend contacting our tech support team at 800-852-3228, or techsupport@dakotadigital.com for specific information on your installation. Thanks much!
Hi I bought the wrong indicator I bought one for Overdrive but it's for a 350 turbo I've got the whole kit if skip fitting the overdrive cable will that show drive second and first
Thanks for the message, As long as you can connect to a shift linkage and utilize at least half of the travel of our sensor, it could certainly be adapted to work. Thanks!
I am using this with a 4l60e, works perfect however, i have set up my single leds and programmed it, but when its operating the leds are all on and the gear i am in slightly brighter. Is this correct, as i have wired the DIM to my parkers like in wiring diagram but when they are on the others shine so bright you cant tell what gear you are in.
So should it be wired to the actual cluster dimmer or is there something wrong?
Good day,
My apologies for the delay in response.
I would recommend contacting our tech support team at 800-852-3228, or techsupport@dakotadigital.com for specific information on your installation.
Thanks much!
What about when using a Lokar shifter. I understand that I am supposed to buy a Kugel nut. I can't seem to find what that is and how it will work.
I'm thinking about mounting the sensor to my b&m shifter???
Hey there,
This should be possible, we would suggest starting with the included universal mounting bracket.
@@DakotaDigitalTV thx im going to order a kit with the little square red display right now
Hi I bought the wrong indicator I bought one for Overdrive but it's for a 350 turbo I've got the whole kit if skip fitting the overdrive cable will that show drive second and first
Hello Frank,
Yes, this GSS-2000 is capable of being used either with, or without overdrive. When programming the gears, just skip the overdrive step.
@@DakotaDigitalTV thank you taking the time to read and respond .i am confident to give a try cheers
Will this work on a 200-4r?
Do you think something like this would work on a 4EAT? (subaru 4 at trans)
Thanks for the message,
As long as you can connect to a shift linkage and utilize at least half of the travel of our sensor, it could certainly be adapted to work.
Thanks!
Will this bracket clear header?
Hey there, yes, this should clear a header in nearly any scenario.
Will this work on a 700r4 trans
Yes it will, along with the GSS-3000 which replaced it!