This is a quick and easy trick that can save tons of cash and lots of headachs.. Just to make sure everyone understands this technique is not intended to paint the outside of the vehicle.. Thanks for watching and PLEASE SUBSCRIBE and Comment Below!
diyautoschool talk all you want it goes with W.L.L. If you watch one of my friend Petes videos and don't learn. you either don't belong here or your just a lost cause. will always love this channel
I am new to looking at painting stuff, mainly looking for rust prevention on my first truck. Why cant you do it on the exterior, or rather not recommended?
Pete I like your tips and techniques very much. You are a kind heart, honest man, with tremendous talent. I try to help young people. It is hard to use these videos with the language. Use better language and see your ratings go up. I love you Pete is the only reason I am making the comment.
Thanks for the comments and gestures.. I am who I am and it may bring me down in life to be me but I can't be fake... Sorry you can't share with others.. Take it easy!
Have not painted a car in decades, got interested again and your channel is a huge help. Going to paint a 2003 Mercedes e550 wagon. Bought new guns and accumulating all the supplies i need, watching your videos and trying to get myself semi-prepared.
Hey Pete, I want to thank you for all you are teaching us. I'm restoring a 72 El Camino on a budget and couldn't do it without your videos. I saw there were a few thumbs down comments. Some people are just too dumb to understand and take advantage of the knowledge you share.
I think everyone is on a budget these days Ron. I wish you the best of luck on your El camino , There's always LOSERS everywhere you go, we'll get past them.. Take it easy!
The old mixing cups can be cleaned out easily by letting leftover paint film inside the cup cure then simply squeeze the plastic cup and 98% of the paint will pop right out of the mixing cup
Hey Pete, you have a lady here who really appreciates all your videos, and I LEARN a ton from your stuff, and I apply it all to my own car!:) A 1985 Camaro sports coup I have had for over 20 years and been rebuilding so I can keep driving it...soooo, thanks very much, and this tip is perfect for some of the work I need to do on my car!:) Cheers buddy and have a really great day, if you get to read this:)
Great life hack, Pete! I keep coming back to this video for a refresher on your magic mix. Just finished a door and jamb this way; worked like a charm!
Pete I usually don’t comment on these shows. But I do have to with yours. Thank you for teaching me how to paint. I had to paint my Harley 4 times to get it right. But it’s right now and that’s thanks to you and mini.
U can talk all day my friend!!! U are a great teacher and a cool guy and much much more! I've seen em all and I keep going back and u have inspired me to paint cars and do good bodywork
I really enjoy your diyautoschool series. I'm getting ready to restore my daily driver. 85 F250 4X4, that has 340,000 miles on it. I already have a parts truck that's gonna donate its cab but, it has dents on the corner of the cab in the left side near the rear window glass and half way down the door. Evidently someone was using it as a cab and chassis with a fifth wheel on the back and jackknifed a trailer. My current cab has the floors rotted out and the cab has dropped two inches in the front. I would rather straighten dents on the donor cab than replace a whole floor.
wow Pete, You made that look way too easy. I can't believe much the paint looks like the original factory spray inside the hood. I've painted on the assembly line and I know that the process is done in three steps not just two like You did. what a time saver. thanks Pete.
Love what you are doing with the " how to's" on bodywork and painting a car. It has given me the courage to prime and paint my 57 Dodge Convertible. John Quinn Arvada. Colorado
Iv been thinking about painting cars for a while. I paint steel all the time at work. But never a automobile. I'm gonna do it damn it, your channel helps immensely. Thank you keep it up.
Looool Yoooo Pete imagine going to a class that the tutor rarely talks or can't explain themselves. I love your content even before when your cuss far more the content is absolutely valuable so keep at it. Thanks from Romell, Enresult Autobody from Barbados.
At the beginning of the video,when you explained what you were doing,I thought the coverage of the paint and clear would require 3 or 4 coats minimum. But outside of the small runs,it turned out great. I'll give this a try. Great video.
Retired Trucker/Mechanic etc..... Lotsa really good old cars back there.......self teaching myself to paint with my cheap HVLP gun. I knew most of the basics but this one took it a step further....... thnx :) By the way...... Just Subscribed
Great video I am going to be painting a bunch of old metal kitchen cabinets from the 1950s and outing them in my garage. I have a couple of old Binks guns that I will be using. Never painted with a good spray gun before besides an old Campbell hausfeld gun from the 80s. Watching your videos inspires me to get out there off the Couch. Go Navy
WOW, I didn't know that you could mix the clear/base coat like you did. I will be doing that to my old truck door jams here soon. Thanks Pete! You truly are my friend. You don't talk too much by the way..
Not only did I lean something you saved me time and money because that was quick and easy and dang it sure saves a lot of time. Also I enjoy when you go into details it clears everything up for me! Thanks!
Again another great time and money saver! I will start restoring my chevy truck this summer. Since i will change the color, doing the engine compartment this way will be fast and effective. Not going to paint the exterior this summer but since i have to remove the fenders and rad support,i will pull the engine out and repaint everything so i will be done with this. next summe i will focus on the exterior. Thankyou Pete!
Thank Pete I tried your system on the underside of a hood I'm working on. Came out Great!! Your right on about the hardener the fist time I mixed it up I put to much and it clumped up while mixing it. Very little harder and was good to go. You give great advice Thanks Again Bob
hey Pete I'm doing a 64 chevelle 4 door and going to be doing a 66 impala 2 door hardtop next I'm really enjoying your videos they are teaching me a hole lot of tricks that I didn't know, I have painted cars back in the old school days but things are different in todays world of painting , thanks a lot and I will be following your vids
That's a Great Trick i have done that same trick years ago on a bike paint job and my friends Said it would never work till they seen it right ! You are The Man My Friend Pete Great Video Pete ! The Trick That i For got over the years from not doing Paint Jobs Any More !
very good tip, save money. paint supplies are going up in price all the time, and voc's are making it harder for the diy guy. I love your vids, your keeping the "old school" alive!!
More information is better than not enough information Pete so please keep the well thought out and detailed instructions coming thank you again sir from Little Rhode Island
Hey Pete, this is Ciff, your Cliff, my Cliff, I understand your talk my talk, you explain thing's that the folk's can understand, I am doing a $ 68 camaro and the quarter panel replacement help me 100% for sure and all your video's are great to tell you the truth I do have 2 68 and 1 69 camaro's to work on hopefully if I don't go broke or die I can keep busy for a while anyway keep them coming I like your talk I like your walk on your mission to inform the DIY guy's the way restoration or for that mater paint shops put it in your ,you know what I'm sayin right, keep the video's comin and I'll be the, hanger was my nick name at work I made an old time mad and he came up to me and said and I made him mad because I laught hard at him when he said , YOUR A REAL CLIFFHANGER so there you have it see ya.
dude . I love this. it took a little getting used to you. but, now that I am... you are by far the best no bullshit resto guy I have seen. and minni is great too.
Great tip wish I would have learned this a week ago when I had to paint under my hood. It's got base but no clear coat yet. Now I have to go back to my brothers garage get set up again for 2 ministers work. Lol, thanks Pete
Thanks for the talk Pete! been watching your videos for a couple years now. Listening to your experience and tips. Definitely going to apply this one to my 67 barracuda!
My buddies dad did the clear coat, base coat mix on his 57 Ford Retractable. It came out pretty good, and the first thing he told us, kids don't try this at home!
First off i would like to say your videos are awesome. This tip is a very good idea never knew you can do that to create your own single stage paint. thanks for sharing
Great video keep up the good work, I plan on painting my truck soon as the weather allows me to cause I will be painting in my backyard and with your help I think that I can do it.
great tip pete👌. I watch your video's from time to time, and am always informed, and get a good laugh when you tell people off. keep up the good work, and I will try that on some inner fenders that I'm shooting.
love it Pete , I've got a 1967 firebird ,and a 1968 tempest I need to redo to daliy driver status ! thanks for all the clown action lol keep talking we,r out here listening !!!!!!!
Pete the inside of the fender came out nice . Everybody likes to save money when you do it yourself. Great tip, good video. I hope to see you guys on Fri. jim.
Thanks for the info. I always wondered if you could add clear to basecoat with hardener. That would save a lot of time and you only have to clean your gun once.
I've wondered if it was possible to mix the two now I know and I'm definitely going to be doing it. Thanks Pete and keep on talking it's usually educational or comical either way it's all good.
Great job dude I appreciate the little tidbits you've had to learn the hard way makes life easier for guys like myself and hadn't really done it that much keep on with the good work Buddy Mooresville North Carolina
I know I'm in the right place!!! Question My Friend Pete, the left over mixed paint from the fender, what to do with it? Save it, pour it, or what. Being a DIY rookie painter, I suffer from over do it syndrome. Worried to run out and screw up the second mix and she don't match. What ya got to help, or just keep at it and practice?
This is a quick and easy trick that can save tons of cash and lots of headachs.. Just to make sure everyone understands this technique is not intended to paint the outside of the vehicle.. Thanks for watching and PLEASE SUBSCRIBE and Comment Below!
Like it a lot ,don't bother me.Thanks for the class.
diyautoschool this is one of the best teaching channels for auto body. I watch most of your videos.
diyautoschool talk all you want it goes with W.L.L. If you watch one of my friend Petes videos and don't learn. you either don't belong here or your just a lost cause. will always love this channel
I am new to looking at painting stuff, mainly looking for rust prevention on my first truck. Why cant you do it on the exterior, or rather not recommended?
Can you do that with water based paint?
Pete I like your tips and techniques very much. You are a kind heart, honest man, with tremendous talent. I try to help young people. It is hard to use these videos with the language. Use better language and see your ratings go up. I love you Pete is the only reason I am making the comment.
Thanks for the comments and gestures.. I am who I am and it may bring me down in life to be me but I can't be fake... Sorry you can't share with others.. Take it easy!
Have not painted a car in decades, got interested again and your channel is a huge help. Going to paint a 2003 Mercedes e550 wagon. Bought new guns and accumulating all the supplies i need, watching your videos and trying to get myself semi-prepared.
Thanks great John -- Good luck on it!
Hey Pete, I want to thank you for all you are teaching us. I'm restoring a 72 El Camino on a budget and couldn't do it without your videos. I saw there were a few thumbs down comments. Some people are just too dumb to understand and take advantage of the knowledge you share.
I think everyone is on a budget these days Ron. I wish you the best of luck on your El camino , There's always LOSERS everywhere you go, we'll get past them.. Take it easy!
The old mixing cups can be cleaned out easily by letting leftover paint film inside the cup cure then simply squeeze the plastic cup and 98% of the paint will pop right out of the mixing cup
I do that all the time. Works great!
Keep talking pete, unlike many other people, when you talk its always great information.
Thanks for the comments and support Hippie!
Hey Pete, you have a lady here who really appreciates all your videos, and I LEARN a ton from your stuff, and I apply it all to my own car!:) A 1985 Camaro sports coup I have had for over 20 years and been rebuilding so I can keep driving it...soooo, thanks very much, and this tip is perfect for some of the work I need to do on my car!:) Cheers buddy and have a really great day, if you get to read this:)
Thats awesome Vicki.. If you get a chance send me some pics of your car painted to onwayup@yahoo.com GOOD LUCK!
Thanks Pete ! Watching your videos has saved me tons of time and money so you keep talking and I will keep watching.
Great life hack, Pete! I keep coming back to this video for a refresher on your magic mix. Just finished a door and jamb this way; worked like a charm!
Pete I usually don’t comment on these shows. But I do have to with yours. Thank you for teaching me how to paint. I had to paint my Harley 4 times to get it right. But it’s right now and that’s thanks to you and mini.
Send me some pics at onwayup@yahoo.com so I can see your finished job..
U can talk all day my friend!!! U are a great teacher and a cool guy and much much more! I've seen em all and I keep going back and u have inspired me to paint cars and do good bodywork
I really enjoy your diyautoschool series. I'm getting ready to restore my daily driver. 85 F250 4X4, that has 340,000 miles on it. I already have a parts truck that's gonna donate its cab but, it has dents on the corner of the cab in the left side near the rear window glass and half way down the door. Evidently someone was using it as a cab and chassis with a fifth wheel on the back and jackknifed a trailer. My current cab has the floors rotted out and the cab has dropped two inches in the front. I would rather straighten dents on the donor cab than replace a whole floor.
wow Pete, You made that look way too easy. I can't believe much the paint looks like the original factory spray inside the hood. I've painted on the assembly line and I know that the process is done in three steps not just two like You did. what a time saver. thanks Pete.
Thanks Tom..
This worked for me on a cheap pickup truck. Thanks again Pete. You're a great instructor and you make learning fun.
Love what you are doing with the " how to's" on bodywork and painting a car. It has given me the courage to prime and paint my 57 Dodge Convertible. John Quinn Arvada. Colorado
Great Tip Pete !!!!! That brings back memories , My Dad owned 3 El Caminos , and gave the last one to me when I turned 16 , it was a 76 ...
Iv been thinking about painting cars for a while. I paint steel all the time at work. But never a automobile. I'm gonna do it damn it, your channel helps immensely. Thank you keep it up.
Looool Yoooo Pete imagine going to a class that the tutor rarely talks or can't explain themselves. I love your content even before when your cuss far more the content is absolutely valuable so keep at it. Thanks from Romell, Enresult Autobody from Barbados.
At the beginning of the video,when you explained what you were doing,I thought the coverage of the paint and clear would require 3 or 4 coats minimum. But outside of the small runs,it turned out great. I'll give this a try. Great video.
Thanks Billy -- Good Luck!
Love the way you get to the important parts and repeat them. I am doing my first build ,1971 k5 blazer and watch you all the time,very helpful thanks!
Retired Trucker/Mechanic etc..... Lotsa really good old cars back there.......self teaching myself to paint with my cheap HVLP gun.
I knew most of the basics but this one took it a step further....... thnx :)
By the way...... Just Subscribed
Thanks NOTWRK I appreciate the support and Good Luck with all you do..
Great video I am going to be painting a bunch of old metal kitchen cabinets from the 1950s and outing them in my garage. I have a couple of old Binks guns that I will be using. Never painted with a good spray gun before besides an old Campbell hausfeld gun from the 80s. Watching your videos inspires me to get out there off the Couch. Go Navy
WOW, I didn't know that you could mix the clear/base coat like you did. I will be doing that to my old truck door jams here soon. Thanks Pete! You truly are my friend. You don't talk too much by the way..
No problem Tom -- Good luck
Hi Pete,
I've been reviewing all your videos getting ready to paint my '71 VW bus. So far so good!
Not only did I lean something you saved me time and money because that was quick and easy and dang it sure saves a lot of time. Also I enjoy when you go into details it clears everything up for me! Thanks!
Not only is this channel educational, You also learn to do it right! Good video Pete, I need to call you soon. Shane
Again another great time and money saver! I will start restoring my chevy truck this summer. Since i will change the color, doing the engine compartment this way will be fast and effective. Not going to paint the exterior this summer but since i have to remove the fenders and rad support,i will pull the engine out and repaint everything so i will be done with this. next summe i will focus on the exterior. Thankyou Pete!
Thank Pete I tried your system on the underside of a hood I'm working on. Came out Great!! Your right on about the hardener the fist time I mixed it up I put to much and it clumped up while mixing it. Very little harder and was good to go. You give great advice Thanks Again Bob
I find your videos to be the best out there, I watch them all of the time and have learned so much.
I've enjoyed looking up solutions to my problems and coming across your videos. So I'm about to give this a shake today . Thanks for the info
Good job Pete, enjoyed the video.Starting to do home bodywork and you are showing me the right way to do things.Thanks
hey Pete I'm doing a 64 chevelle 4 door and going to be doing a 66 impala 2 door hardtop next I'm really enjoying your videos they are teaching me a hole lot of tricks that I didn't know, I have painted cars back in the old school days but things are different in todays world of painting , thanks a lot and I will be following your vids
I've learned a lot from you Pete. One of my favorites is painting with spray paint. I restored an old Jacobsen Chief tractor that was my fathers.
That's a Great Trick i have done that same trick years ago on a bike paint job and my friends Said it would never work till they seen it right ! You are The Man My Friend Pete Great Video Pete ! The Trick That i For got over the years from not doing Paint Jobs Any More !
very good tip, save money. paint supplies are going up in price all the time, and voc's are making it harder for the diy guy. I love your vids, your keeping the "old school" alive!!
I did learn how to convert a base coat to a single stage, thanks Pete!!! YOU ROCK
That’s a trick that’s priceless specially when materials are not cheap thank u my Friend Pete manny Blessings to u An Minnie 🙏🏽🙏🏽🙏🏽
More information is better than not enough information Pete so please keep the well thought out and detailed instructions coming thank you again sir from Little Rhode Island
When will you do a review on the harbor freight spray gun? Looking forward to that. Thanks for all the great tips Pete!
Robert Kraft I get a new HF gun per two cars. Im not a fan of cleaning guns between cars
really appreciate your vids l live in a Apt so I can't try out what l'm seeing but you're very informative gives me images of how it's done
Hey Pete, this is Ciff, your Cliff, my Cliff, I understand your talk my talk, you explain thing's that the folk's can understand, I am doing a $ 68 camaro and the quarter panel replacement help me 100% for sure and all your video's are great to tell you the truth I do have 2 68 and 1 69 camaro's to work on hopefully if I don't go broke or die I can keep busy for a while anyway keep them coming I like your talk I like your walk on your mission to inform the DIY guy's the way restoration or for that mater paint shops put it in your ,you know what I'm sayin right, keep the video's comin and I'll be the, hanger was my nick name at work I made an old time mad and he came up to me and said and I made him mad because I laught hard at him when he said , YOUR A REAL CLIFFHANGER so there you have it see ya.
Thanks CAP! The comments and support are great news and whats better your DOING IT YOURSELF and PROUD TO DO IT!
Great tips . From Pete he knows his stuff . Lessons in life and work .
Thanks for this video Pete! You talked about this in the past and it is great to see it actually done. Great work Pete!
dude . I love this. it took a little getting used to you. but, now that I am... you are by far the best no bullshit resto guy I have seen. and minni is great too.
Great tip wish I would have learned this a week ago when I had to paint under my hood. It's got base but no clear coat yet. Now I have to go back to my brothers garage get set up again for 2 ministers work. Lol, thanks Pete
Thanks for the talk Pete! been watching your videos for a couple years now. Listening to your experience and tips. Definitely going to apply this one to my 67 barracuda!
Yes Pete , I am learning something . Thanks for the great tip on mixing the paint for areas that are not seen .
My buddies dad did the clear coat, base coat mix on his 57 Ford Retractable. It came out pretty good, and the first thing he told us, kids don't try this at home!
First off i would like to say your videos are awesome. This tip is a very good idea never knew you can do that to create your own single stage paint. thanks for sharing
Great tip. Found this video just in time. Love your videos. Fun to watch.
Awesome tip Pete! Thanks!!
I always learn from you. You are good teacher of the real old school
Thanks for yr time and efforts
Great video keep up the good work, I plan on painting my truck soon as the weather allows me to cause I will be painting in my backyard and with your help I think that I can do it.
Pete I have watched almost all your videos and like always, I watched listened and learned Keep them coming.. Thanks
great tip pete👌. I watch your video's from time to time, and am always informed, and get a good laugh when you tell people off. keep up the good work, and I will try that on some inner fenders that I'm shooting.
love it Pete , I've got a 1967 firebird ,and a 1968 tempest I need to redo to daliy driver status ! thanks for all the clown action lol keep talking we,r out here listening !!!!!!!
Thanks Pete. Your guidance is much appreciated. Dave, Warrenton, VA
Thanks for watching DAVE... Good luck on all your projects..
Pete the inside of the fender came out nice . Everybody likes to save money when you do it yourself. Great tip, good video. I hope to see you guys on Fri. jim.
yes I like your videos I feel like your the only one I can trust for autobody work and paint
Shit Pete I have done that with all jambs anything where the sun don't shine. time saver tips years ago.
I love your running commentary. stuff those that say you talk to much! Good vids man and teaching me heaps. Thank you very much 👍🏼
Thanks my friend Pete, I will definitly use this on my Chevy's door jambs.
I agree . It makes real good sense Pete . Thanks for the tip .I'll give it a go and try it catch you next time
Thanks for the info. I always wondered if you could add clear to basecoat with hardener. That would save a lot of time and you only have to clean your gun once.
I've wondered if it was possible to mix the two now I know and I'm definitely going to be doing it. Thanks Pete and keep on talking it's usually educational or comical either way it's all good.
Wow, I learned a great trick for painting jambs
Tanks Pete, you are definitely the only one dead serious about this work,,,
Great Video Pete, I enjoy the lessons, I have used alot of your info doing my projects.
Great video Pete. I hope you are able to show the blend on that gold metal flake. Thanks again!
Learned a lot, great tip, will be using it on my project truck in the engine bay, thanks Pete!
Thanks Pete that's a great tech tip sure saves time and money and it'll look factory
Great job dude I appreciate the little tidbits you've had to learn the hard way makes life easier for guys like myself and hadn't really done it that much keep on with the good work Buddy Mooresville North Carolina
Thanks Pete you saved me a lot of time and effort !!!
Great tip for making single stage to paint door jams & such !
I like all your videos. I learn lots, thanks for teaching.
This gentleman keeps me laughing , but he's a bad man in a good way with that bodywork and painting vehicles .
Great video! Can't wait to watch some more. Thank you for making these videos. It helps people like me out.
And the paint job really looks good sir .
Thanks for the video! Learning a little bit every day.
Awesome tip Pete! Your doing a great job! Learned a shit ton from your channels!
Great Job Pete! A lot of experience there!
good video, good info, I used that technique on a spot where I burned through the paint buffing, works good.
Exactly what I was looking for, thanks for the advice Pete.
Pete, you're great man. Love your videos and have learned a lot from them. Thanks for sharing your knowledge, all the best.
-Marc
All the talking doesn't bother me at all either. All the diyautoschool videos have been amazing as well as all the SWRNC videos. Awesome job!
thats basically the way i do it. good job pete.
short. sweet. and to the point. You have to love it
Great video ! Thanks for the tips and SHOWING hands on mixing. Your friend John in Ottawa Ontario Canada.
Pete i get lots of great tips from you,like the straight up truth no bullshit.
Keep on talking, Pete. The more you talk the more we learn. Thank you.
Great stuff again Pete. Keep them coming.
Amazeing Pete you can tell how much pressure coming out of the guns I think it is I would have to look at a guage.
I always learn SOMETHING!
Robert in niagara falls wanted you to know!
I always learn something from you Pete! Thanks for the education and entertainment :)
Done that many times on jambing...works great..!!!
Thanks Pete did not know you could do that with base coat clear coat paint.
thanks for the lesson always enjoy the videos.
I know I'm in the right place!!! Question My Friend Pete, the left over mixed paint from the fender, what to do with it? Save it, pour it, or what. Being a DIY rookie painter, I suffer from over do it syndrome. Worried to run out and screw up the second mix and she don't match. What ya got to help, or just keep at it and practice?
Hey Pete that's a great tip as I'm get ready to jam my 70 Nova
i am glad i found your UA-cam i am starting to redo a 1972 firebird
found your channel the other day .. like your videos (on both your channels) ... many great tips from you ,