Це відео не доступне.
Перепрошуємо.
Adding cruise control to a Mazda3 2004-2009
Вставка
- Опубліковано 15 сер 2018
- *** Before doing anything check that your harness behind the brake pedal has 4 pins. If not, this won't work
parts needed:
BN7N-66-490
BN8P-66-4M0
*DISCLAIMER: I am an accountant, not a professional mechanic. I learnt how to do this through research online, and while it has worked very well for me, use your own judgement and follow my advice at your own risk!
Does not work on EU models, as they have cable throttle while US models have drive by wire :/
you are right, but for example Mazda 5 diesel is drive by wire in EU too, only gas they have cable throttle, for them you can use universal cruise control kit and use control panel from diesel type at streering wheel
I might give that a try then :)
@@YustBikes did it work ?
@@smago9881 never tried it before i got rid of the car :') so can't tell you if it would work
@@michalveverka5031 Yea but the universal one is expensive af, takes lots of work and heavy technical skills. I wouldn't recommend that, especially to an old car. I have a mazda 3 Gasoline 2003/2004 EU, also cable throttle, and I personally wouldn't do it. But if you wanna do an upgrade to this car, i rather put a new radio head unit in, and new woovers in the doors, maybe a subwoover? I have those installed. Also my small 1-din head unit supports a rear view camera. And those things are totally do-able for a non-mechanic but still tech savvy nerd like me. And i'm very happy with those upgrades :D
This does work, listen to him carefully, make sure you have a 4 pin brake switch and if you have different model cruise control, then you need to ground the white wire. Thanks for the video, worked like a charm.
I did the same steps with my 2007 Mazda and it works! My core motive was to replace my clock spring to fix an airbag warning light issue. Pulled a clock spring and the whole steering wheel from a 2008 Mazda 5 at Picknpull. Cost me about $50CAD. Now my airbag’s fixed and I have cruise control. I had a terrible time getting the blue brake switch out and I’m not sure exactly why. I went so far as to tear off the little tabs on the one I was replacing, which didn’t help anything. I think maybe what I was doing wrong was I was pushing the break pedal out of the way. I guess if you just leave it, all’s well and it comes out with little effort. Happy cruising!
Really great video with lots of tips and explanation of considerations.
It should also be stressed what is really great about this video is that you get to the point and show everything that is needed and relevant and cut out the fluff and your "life story." Very refreshing.
Hey thanks very much! I tried to keep it as concise as possible. Hope it was helpful
It took me forever to find your video but you're a legend. This is exactly what I want to do.
This worked beautifully and was quite easy to do I wish I knew about this sooner but either way thank you very much!!
You guys need to check first if your Mazda 3 has electronic throttle before trying to save yourself time and money. There are two ways: Look at your gas pedal and see if there is a harness going to the pedal. If not, then you can't do this mod. that means you have a mechanical throttle. Another way is looking at the engine. An engine with an electronic throttle should NOT have a cable going to the throttle.
Worked for my Mazda 3 2007 GS sedan ! Did the same thing that he did!
Awesome video man!! I tried it on my 2009 Mazda 3 and it works. Thank you man
Brake switch required 3wire and on Mazda 2 DE may require program address
So excited 😁. It's working prefect. Thanks
Buenos días el interruptor de freno tiene que tener 4 pines, entonces la conexión también?
Thanks, grounding did the trick!
Didn't work for me. Check the plug on your brake switch has 4 wires first
Fantastic video! I've been wondering how simple this mod would be, if at all possible. I've checked our Mazda 3 and it definitely has 4 wires coming off the back of the brake switch, and the throttle is not cable connected. I've managed to source a full steering wheel control part - my question though, is it difficult to swap out those plastic shrouds on the steering wheel? Do they screw in or clip or something? Thanks!
They have screws, those are insanely easy to remove.
Gran video
Has anyone had the issue with applying the brake and the cruise not disengaging?
I have cruise control on mine idk why you don’t have have the same year but the hatchback
Hey, I have a qn if you can help. I ordered the parts from eBay and installed the switch. But when I press horn, cruise control turns on. When I press volume up, horn sounds. Any advice?
I would have attached a photo of the pin out if UA-cam had a provision.
Thanks
Thanks I've buy a new steering wheel for my 2008 M3 1.6 with cruise control buttons, hope it'll work!
does it work?
@@ahmedsaleh2806 not yet, my plug have only 2 wires instead of four on the video. I have to ground the wire but I'm not that good as an electrician...
I've tried with only the cruise button, it doesn't work. You really need that brake switch
Not working for me. Need 4-pin switch
@@atraxion82 I got 1500CC version (BK model) . My brake harness has four wires and so I replaced the exisiting two pin break switch with a 4 pin break switch and replaced new steering switches with cruise control buttons. Didn't worked for me. I even tried grounding the white wire but still doesn't work. I can even see the word cruise in the fuel gauge display area( Unlit). So car has all the capacity in it to be converted to cruise control, but still doesn't work for me. Any pointers?
Anyone got this to work on models with only 2 wires coming to the brake switch?
By adding the 2 missing wires to the harness?
Or does the mechanical gas pedal ruin any hopes for getting a factory style cruise?
Hi, I got 1500CC version (BK model) . My brake harness has four wires and so I replaced the exisiting two pin break switch with a 4 pin break switch and replaced new steering switches with cruise control buttons. Didn't worked for me. I even tried grounding the white wire but still doesn't work. I can even see the word cruise in the fuel gauge display area( Unlit). So car has all the capacity in it to be converted to cruise control, but still doesn't work for me. Any pointers? My air bag unit had only single yellow wire going into it and my steering wheel button which was in place had two earth wires, so I got a switch with two earth wires. My music controls are working fine even after the change, but cruise isn't working. I have noticed there is another steering wheel switch version with a single earth as well. Should I be trying that as well? Or should I try and see earthing a different wire in the new switch?
I'm having the exact same problem as you did you ever find a solution
@@regularruby3786 @Regular Ruby Unfortunately no."Paul in perth" has another video on this and I asked him the same question. He says it must work without any issues in 2008 Mazda 3 BK version. One possible scenario to this problem could be incompatible steering ribbon cable that might not have all the wires needed to carry that extra signals from the cruise control button wires to the ECU. But it's just my guess. I have to explore more
I have a 2007 Mazda3 which uses fly by wire but my brake switch connector only has 2 wires going into it not 4. Can I attach the extra 2 wires and connect them to where they need to go? If so, where do they actually go to
I have a 2005 mazda 3 2.0 all i need is to order the blue switch behind the brake and the cruise controll and just plug and play or that i need a steering wheel with conections ?
It works thanks
I wonder if this will work on the same years Mazda 6/ atenza
Nice video. If you have time for a question. 2008 mazda 3 the cruise control is now intermittent. I can switch the light on and off but sometimes the up down button and the cancel buttons don't work to engage the cruise.
Could it be as simple as the brake pedal switch. ?? Thanks for your time.
Same issue here
I have 2.0 l Mazda 3 BK 2007 throttle by wire and it doesn't work. Everything's done like in video and nothing happened. Any ideas anyone?
Is it possible to do it if my brake switch cable has only two wires?
Why do I have to rewire the airbag ? Wouldn't it work with just plugging in the new cruise control buttons with the +2 pin connectors ?
No
Man you're awesome!, I've been postponing doing this to my car because I have zero experience working on cars, but with a quick drive to the junk yard an a couple of tools and a couple of hours later I now have cruise control!. but for some reason my SRS airbag light is on now, it's giving me B2234-F0 error code "Air Bag Inflator Circuit Resist Low on Squib - Loop #2. Front Driver side" any idea what's causing the issue?
Thanks again :)
So happy it was helpful!
I'm no mechanic either, but assuming you put back the same airbag, and didn't drop it in the process, i imagine it must be the connection? Really not sure, i had no such issue.
@@mcorving just got it fixed up!
It’s probably one of two things
1. Removing the battery cables triggered something
2. The grounding of the white wire was missing with the resistance
Thanks for the quick reply!
@@ammarmuhrez5650 hey what did you do to fix your light situation.
@@zakiramjan9822 I’m not really sure what triggered the airbag light
It still comes and goes randomly
any suggestion on how to do the 2011 mazda 3?
I just got off the phone with Mazda of Longwood Florida and they said that they could sell me the parts and do the labor all told it would be about $400
That's double what i paid for the entire donor car 😂
I guess for dealership prices that's not bad though!
How to active cruise control for it ?
You think it could work with a 2009 Mazda 5?
I try this in my car but its doesnt work my throtal by capel not electronic
Please any one now same video from mazda 2 2013😢
Hi dear
Is there any mechanical parts needs to be added?
I have m3 2008 1.6 gulf edition
so i did this had to ground my white wire and now i can turn on cruise and i see the orange indicator but when i hit set nothing happens
My guess is that the wiring to the SET button or the SET button itself is damaged. I hope that helps. Paul.
Does doing any of these changes inbit the ability for car insurance?
wouldn't think so being it's all mazda genuine parts and available as an upgrade or standard equipment on most models
I'm looking at doing this to my 09 bk which didn't come with cruise control or stereo controls on the steering wheel.
Will the stereo steering wheel controls start working as well?
Hi Tim. I honestly didn't even know they were available without steering controls to be honest. For all i know you might not even have any wiring going up in there. I suggest you check before investing in any parts
Took the plunge on weekend.
What pain the brake switch is to get in and out! Considered trying to remove lower dash . Got it in the end!
Installed new steering wheel with switchs.
Plug everything in . I have stereo controls but no cruise control.
( Find out donor car was actually 05 model)
So do the white wire grounding mod and sucess I have cruise control
Your car throttle is electrical (wired) or normal ( cable)?
Adnan Alamri no idea, didn't have to touch it
You need electrical "wired" throttle. Normal cable wont work
Hi I have 2006 sp23 drive by cable not electronic, will it still work?
No
Hello Sir, I added the steering wheel with cruise control and the BN7N-66-490 SWITCH, BRAKE, W/CRUISE to my Mazda 3 2011, but this does not work yet. I mean the cruise control doen not work. Do you have info where is the mistake? Thank you. I appreciate so much for your time. Cheers
Have you found a solution to this problem? I'm trying to do the same thing with my 2011 Mazda 3 and want to know if I can before I get the parts.
BN7N-66-490 SWITCH is for 2014 and newer mazda 3's.
You need to buy a brake light that HAS cruise control. Go check out this site and put in your mazda's year and pick the GS model. Hope this helps!
www.go-parts.com/ps-mmp.php?make=Mazda&model=3&parttype=Brake+Light+Switch
Tried on a Sp23 2004 manual, but my brake switch has only 2 wires in the plug from the loom, so switching in the 4 pin brake switch was useless. Didn't work.
@@nathanbutler3424 I have ran into a similar problem, the brake switch loom has 2 wires. I am going to attempt to change it.
Update, if you follow the 2 wires, they lead to a connector and from that connector, there is a 4 pin that is connected into it. I removed the 4 pin from there and connected it to the brake switch 4 pin. My cruise still does not light up. I'm out of ideas.
How to add a cruise control Mazda6 2006?
mahdi salman اشتغلت معك؟
@@muslimsalem2896 نعم اخيراً اشتغلت
2006 model......ONLY 2 WIRES in the harness. So basically crap.
The one under the brake pedal?
@@mcorving yes. Only 2 wires in the plug. There is a short cable that goes from the switch to another larger connector on the firewall. Probably different cable for cruise.
Will this work on 1.6 engine model?
Not if u have EU model, because you probably have Cable Throttle like me. You can check, unplug your brake-switch (see video) and if it has 4 pins on the cable (not the switch), you have hope, but if this connector only has two pins/conductors, then I have to disappoint you, like myself.
But if you wanna upgrade something in your old beast, think about a new radio, door speakers, rear camera etc.. i have those and i'm very happy i did it.
Yea, yea, you could install a universal one which costs hundreds of dollars and takes major technical en mechanical skills, but I definitely would not recommend this to a noob (like myself.)