Hi guys, you two are my favourite go to for advice on craft projects. I have a question: how do I get all the bubbles out of my Liquid Fimo polymer clay? Thank you both for your help. Love from Amanda Jones in Melbourne, Australia ❤️
How would u go about adding a hole inside the molds if they don't have one? Could I push a needle through it after it's baked or would I have to insert something inside the clay as it bakes? The molds I have don't have hole places.
I just made a mold alcoholic and sculpey came out a little bit flimsy is that supposed to happen? I baked it at 325 is what the one video said that I watched I was afraid to go 300 because I didn't know if it would hurt my mold or not
The bezel poor molds that you used that have the nice little I don’t know thing that creates a whole I don’t see those anywhere where did you get those and where can I find one
Hello. Thanks for sharing it with us. In order to make beach glass, do you think it would be possible to use a bit of colored clay or some other powder? Thanks. Hugs from Brazil.
I know this is an old video, but I've been testing with this lately (mostly the clear and opaque LS) and I am getting cracks throughout the pieces straight from the mold. On the surface, on the sides. But not always. I can't work out what is causing the issue? At first I thought I might have been over-baking or baking too hot, then I thought maybe it was the additives I was adding - like paint, old ink or glitter, then I thought it was the molds I purchased - so I tried with just the clear and just the opaque in the sculpey molds you have shown here - and I am still getting them. Please tell me there is a fix for this or it's something I am just missing? Thank you!!
Thank you both as I now Know what to do with my old, brittle, crumbly clay. At first, I attempted to rescue the variety of blocks having purchased at a thrift shop with recommendations provided in searches....NAH! toooooooooooo OLD and crumbly!!!! sssssssSo...I will flake crumble old into forms and ADD liquid as a resin function and whala...abstract salvage!
Love that you were to the point and didn’t waste any time in teaching us. Thank you
You both are my favorite crafty team! Thank you for sharing all the wonderful ideas. I need to check this stuff out. 😊
Awwwww - Thanks so much!!! :)
Sooo. When in the process could I maybe add some printed paper to one side ? 😬
Thanks y’all these are gorge!
Hi guys, you two are my favourite go to for advice on craft projects. I have a question: how do I get all the bubbles out of my Liquid Fimo polymer clay? Thank you both for your help. Love from Amanda Jones in Melbourne, Australia ❤️
Do you have any tips on minimizing air bubbles?
How do you minimize the bubbles that are created when mixing?
there are blobs of colour in the middle cant u make into earings to since they all cook at diff rates cant u use the hole mold at once?
How would u go about adding a hole inside the molds if they don't have one? Could I push a needle through it after it's baked or would I have to insert something inside the clay as it bakes? The molds I have don't have hole places.
Just use a pen drill…
Can silicon mold go inside the oven for baking
I just made a mold alcoholic and sculpey came out a little bit flimsy is that supposed to happen? I baked it at 325 is what the one video said that I watched I was afraid to go 300 because I didn't know if it would hurt my mold or not
The bezel poor molds that you used that have the nice little I don’t know thing that creates a whole I don’t see those anywhere where did you get those and where can I find one
Hello. Thanks for sharing it with us. In order to make beach glass, do you think it would be possible to use a bit of colored clay or some other powder? Thanks. Hugs from Brazil.
Do you attach a metal bezel before or after you bake? Thank you!
Great tutorial but where did you get the mold?
www.sculpey.com/molds/148-sculpey-silicone-bakeable-mold-jewelry
Love em
Esas piezas hermosas van al hirno? Cuantos minutos? Muchas geacias
Quise poner horno ,perdon
15- 20 minutes depending on the medium used.
I know this is an old video, but I've been testing with this lately (mostly the clear and opaque LS) and I am getting cracks throughout the pieces straight from the mold. On the surface, on the sides. But not always. I can't work out what is causing the issue? At first I thought I might have been over-baking or baking too hot, then I thought maybe it was the additives I was adding - like paint, old ink or glitter, then I thought it was the molds I purchased - so I tried with just the clear and just the opaque in the sculpey molds you have shown here - and I am still getting them. Please tell me there is a fix for this or it's something I am just missing? Thank you!!
Did you figure out the issue? I just started using it and even using just the clay no additives I am getting cracks.
Can these be done with polymer clay please
Thank you both as I now Know what to do with my old, brittle, crumbly clay. At first, I attempted to rescue the variety of blocks having purchased at a thrift shop with recommendations provided in searches....NAH! toooooooooooo OLD and crumbly!!!! sssssssSo...I will flake crumble old into forms and ADD liquid as a resin function and whala...abstract salvage!
All my bottles except translucent say 275
If silver cks at 300 why does my bottle say 275
Where you find or buy the mold for earings?
where can i buy the mold?
where can I find the molds you are using?
Sculpey.com or I’ve also seen them at Michaels
Please let us know if you have any questions..... we are happy to answer. :) Thanks. Cathie and Steve
I love liquid polymer because I am allergic to resin. Both the cealr and translucent are matte. How do I get a shine?
Kristen Szabo hey I would use an indoor outdoor gloss that’s what I used when I did resin and had matte molds
Do the pendants stay soft?
Nope… once baked, they are hard like regular polymer clay…
@@ZippedUpKitz Thanks 💗Two years later, wow! And I still haven't tried it lol. It's just sitting in a drawer.. 😞
Why do you say to bake at 300? The bottle says bake at 275. Just checking!
This looks like a thing for children to do
Disappointed in the rubbery texture!
The guy looks like he doesn't want to be here ..lol
Oh dear
D