@@waterpiggies I do not know what parts, as I have not converted mine. It still runs on CO2. But there are videos on UA-cam that do tell you. I saw a guy convert his on here on UA-cam. Just look for "Airjavelin HPA conversion" and the ones I saw were on Kid Pellet channel and Vipers Videos channel. Kid Pellet has done complete teardowns too and addressed some problems with the airbow and how to correct them, he's really good.
For me personally its because I have a compressor to refill with. Typically though it's not as temp sensitive. Co2 loses a lot of pressure when it gets cold outside so anything that uses it to shoot a projectile tends to slow down some. Airgunners tend to be a little sensitive if projectiles slow down at all lol
Hope u can answer a small question I have. Do you know or have you tried to install the new umarex air javelin hpa bottle adapter that umarex sells and install on a origin ? Just wondering if the threads are the same where the adapter attaches to the frame-receiver as the origin after removing air tube. Tha way can use a regulated hpa tank setup on origin? Thanks if you can answer. Thanks anyway if not known. Appreciated....
Really nice set up you finally put together. I've had similar results with my HPA bottle and remote line set up.
Cool! I always wondered what an AirJavelin (which I also own) on HPA was like, on a chrony. Pretty respectable and very comparable to CO2 speeds.
Needs a little more hammer spring with the regulator set that high I think
Would of liked on fb but I’m in their jail again lol, pretty good results
If possible could you please list the parts needed to switch from co2 to hpa
Ty
A
@@waterpiggies I do not know what parts, as I have not converted mine. It still runs on CO2. But there are videos on UA-cam that do tell you. I saw a guy convert his on here on UA-cam. Just look for "Airjavelin HPA conversion" and the ones I saw were on Kid Pellet channel and Vipers Videos channel. Kid Pellet has done complete teardowns too and addressed some problems with the airbow and how to correct them, he's really good.
What is the advantage of HPA over CO2? I expected HPA to have higher velocity/power, but this seems not to be the case?
For me personally its because I have a compressor to refill with.
Typically though it's not as temp sensitive. Co2 loses a lot of pressure when it gets cold outside so anything that uses it to shoot a projectile tends to slow down some.
Airgunners tend to be a little sensitive if projectiles slow down at all lol
Is this with the upgrade kit or just the tank?
This is one I made roughly a year before Umarex made a kit or the Air Javelin Pro
What is the adapter you used for the tank?
It's from Archer airguns for Crosman 22xx airguns.
Umarex sells a nice kit now
Hope u can answer a small question I have. Do you know or have you tried to install the new umarex air javelin hpa bottle adapter that umarex sells and install on a origin ? Just wondering if the threads are the same where the adapter attaches to the frame-receiver as the origin after removing air tube. Tha way can use a regulated hpa tank setup on origin?
Thanks if you can answer. Thanks anyway if not known. Appreciated....