Difference between 1st angle & 3rd angle projection।

Difference between 1st angle & 3rd angle projection।#firstangleprojection & #thirdangleprojection .
Engineering Drawing me Orthographic projection sikhna bahot jaruri hai. Hamne 1st aur 3rd angle sikhe, lekin oon donome kya antar hai wo iss videome samazme ayega.
After studying the theory of Orthographic projection we have studied the Planes for projection and how the 1st & 3rd angles are formed.We also studied how the views are formed in both (1st & 3rd angle).Here we are going to distinguish between the First & Third angle of projection.
(1)In First angle V.P.,H.P. & A.V.P. are opaque whereas in Third angle these planes are transparent.
(2)H.P. of right side goes down in 1st angle that is why the T.V. on H.P. comes below the F.V. & as A.V.P. goes right, the S.V. seen from left comes to the right of F.V. and in the 3rd angle as H.P. goes up the Top view on H.P. comes on the upper side of F.V. & side when seen from left comes left side of F.V. as A.V.P. goes left.
(3)In First angle portion which is above H.P. & in front of V.P. the object is kept in between observer and plane because planes are opaque.This is light and shadow method whereas in Third angle portion which is below H.P. & behind V.P. we can keep the transparent plane between observer & object.So it is called see & draw method.
Besides these above mentioned points while differentiating both we have to study the standard symbols representating the First angle and also the Third angle of projection.
In actual practice while drawing the views we may jumble in placing the position of views.Therefore, initialy confirm in an Isometric block where the observer is standing to see the front portion.Third angle is simple to understand because this is see & draw method.Hence draw F.V. below the reference line, draw the position of T.V. above the F.V. and if side seen from left draw S.V. left side of F.V. and vice a versa.And then simply cross change the position of views to form the 1st angle projection.
Important Topics Covered :-
1.Theory of planes and formation of 1st & 3rd angle.
2.Assumptions for 1st angle as well as 3rd angle.
3.How the position of views in both angles differ.
4.Actual main points showing the difference in 1st & 3rd angle.
5.Difference in symbol & actual practical difference while projecting any object on drawing sheet without jumbling (from 3rd angle to 1st angle).
#1st&3rdangledifference
#orthographic_projection
#firstangleprojection
#thirdangleprojection
#machinedrawing
#engineeringdrawing
#technicaldrawing
#skilltechdrawing
#sanjaykhair
#orthographicprojection
#difference
#distinguish

[@cadcaetutorial2039]

Super sir this lecture is very nice sir

[@skilltechdrawing]

🙏Thanks for your precious comment❤️

[@cadcaetutorial2039]

So weldon sir

[@skilltechdrawing]

Thank you.

[@kashishsinha_01]

Thank you sir 🙏🙏

[@skilltechdrawing]

🙏All viewers are always welcome to observe the videos until they understand how to prepare views.Thanks.❤️

[@sonudhab1050]

Sir aapne last page mein bahut achhe se samjhaye Hain thanks

[@skilltechdrawing]

Thanks for your comment🙏

[@dr.sampadakhair6596]

Very nicely explained 👍👍

[@skilltechdrawing]

Thanks for liking

[@hemantR070]

Informative video

[@skilltechdrawing]

🙏Thanks for your comment❤️

[@hemantR070]

@@skilltechdrawing same feature control frame पर भी video बनाये sirji

[@skilltechdrawing]

🙏❤️'Step by step procedure of drawing views in the First angle projection method of a simple block' ये video अभी कुछ ही दिनोंमे आप सभी viewers के लिये upload किया जायेगा.Please keep watching.आपका आभार.🙏❤️

[@PRITAMDAS-xj8ts]

Poster ke liye ye use kar sakte ha Kiya sir ya or drawings add Karu ?

[@skilltechdrawing]

❤Abhi maine kuch simple blocks 3rd angle me aur step by step 1st angle me kaise nikal sakte hai ye samzyaya hai.Please, try to draw yourself with instruments.❤