I have same problem don’t move forward os reverse call 4 mechanic all say need rebuild.👀 my truck 2006 f 150 260,000 milles never chance filter or oil before … I’m all most call aaa to take my truck to the shop to rebuilt my transmission 2800 dollars , I’m chance oil and filter today .. a lease for now my truck 🛻 shifts nice today … I see oil is to bad , filter clogged…. No mechanic say to me trade to do this .. all say need rebuilt my transmission…./ I’m spent 75 dollars vs 3000 🤔 I’m just See all videos I’m you tube help me a lot…
The next time for anyone watching you just take the main drain hole plug assembly out of the pan before to drain the fluid very easy the larger plug that connect directly to the pan simply remove that drain it and then remove the pan easy peasy
I'm glad you asked. I brought it to the transmission shop and they did a full rebuild for about $2600. Needless to say I no longer have the truck as it was costing me too much. I now have a 2005 F150 that needs to have the transfer case replaced. I guess that's what I get when I buy them cheap. Thanks for asking.
@@Sip28 the transmission guy explained to me that it was pretty messed up inside, he also showed me the parts that were in bad shape and had ground apart. I understood it the best I could and trusted he was shooting me straight.
@@joelongrid7625 how do you know the transfer case is bad? i have a 2002 f150 fx4 and when i back up sometimes or go forward something seams like its locking up on it. u joints in main shaft are new.
Needs full rebuild, possible hard parts damage, fluid is overheated. driveway tip of the day...after loosening the pan allowing initial fluid drain just slide a floor jack under the pan and have it loosely support the pan until all bolts are out then with 2 hands support the pan against the trans firmly removing the slack and kick the jack away so the pan can be lowered.
Those shavings mean business. But we always hope its something simple. hardly ever is. You have what I would call a catastrophic failure. I feel your pain. I had to get my 2000 F150 tranny overhauled but had 218K. No shavings, just built in mileage failure.
I have a 2004 GMC Envoy. Gears are shifting but truck just revs. No gears work. When I put it in park, it makes a nasty grinding noise. I have to place bricks under my tires or it will free roll. I really hope this video is only what's wrong. HELP!
I could be wrong but i think a 120 ft.lbs.is excessive for those bolts,more like 10-20 ft.lbs.if you strip one of those,getting the gasket to reseal could be a knightmare... He did say ft.lbs..and edited inch lbs..witch 120 inch lbs..would be 10 ft.lbs..
Great vid buddy . Need some help my 2005 F-150 4.6L 2wd . . .I entered my apartment and ran over a big pot hole And truck feels like it lost all drive gear??? Only reverse works :/ any advice??? Thanks :)
I will tell you from experience that little yellow plug that you see inside the pan is the plug that would normally block the dipstick tube hole in the transmission they push that through when they insert the dipstick tube when the truck is being manufactured. A lot of times that plug will fall down into the pan and it's usually forgotten about it won't harm anything but to any good mechanic that knows what to look for if somebody brings in their vehicle with transmission trouble and they find that plug still in the pan that's usually a good indication that the vehicle has never had the transmission serviced. It looks like your transmission never ever had a fluid change.
My silverado had these same symptoms last year, wouldn't drive in reverse and felt like something was binding up in the transmission, but i could drive forward all day long for awhile, then after i tried to back up again it started binding up in forward and reverse both, dropped the trans pan and found metal chunks, long story short, chevys stock torque converters in the 2013 6 speed silverados are junk, it never locked up fully, threw debris in the pump and burned it up, scored the bellhousing, and starved the rest of the trans of fluid. The planetary gears in the trans were chipped thus binding the whole operation up. Had to get a $3200 rebuild. So in advance if you're looking to buy a silverado make sure that it has a 4L80e and not a 6L80e.
I have a 02 f1504x4 paid 300 for the truck ppl said tht the transmission would only work in reverse but I drop the pan no metal shaving no burnt smell I'm adding a new filter tomorrow n new fluid what else should I check before that
After the fluid change I just gave up on the car. It's just sitting in the driveway until I'm ready to junk it. I felt like the first time it was the transmission giving me a warning. Now it's just gone out. Didn't get professional opinion though
@@lisahughes7053 just actually solved it on my uncles car, so we did 3 things, be my guest to try one at a time to know what the problem was. I said it was the computers that needed a reset, & the fluid was too high. There's 2 set of notches on the dip stick the lower one is what you're working with unless the car is hot you want to make sure you fill it between the lower set of notches on the dip stick not past. They filled it with double what it should have been. Also just leave the battery unplugged for a while to reset the computer ez. My uncle and cousin wanted to redo it. We got a new filter & gasket from advance auto parts & more transmission fluid. We redid it wiggled the solenoids with clean gloves on & hand tightened everything back together no big tools. Replaced the battery and filled the transmission one to one & a half bottles of transmission fluid until you get to the bottom notches of the dipstick. Give it a couple minutes in between filling to check the dipstick to let the fluid settle. Lmk if you get the chance to try it we are curious what it was. It's running better than it ever was like a completely different car magnificent.
Man Sir don’t use those types of wheel chalks use something smaller and try never lifting your truck from the skid plate and last that pan is not torque to 150 ft pounds probably 150 inch pounds
I have a Toyota axio 2009, and for some reasons the Drive gear just stopped working. The car won't drive forward but can go on reverse. How can I fix it without necessarily replacing the whole transmission?
@@eranomanahan9118 why is it that you asked this question, I'm kindly asking and very interested... moves was done that rattling/clunky or grinding nose
@@wayneb1357 That was my experienced before my transmission was done. But I can still feel that it changes gears when I tried but it it not engaging. I am thinking of the torque converter.
Hey Joel, I'm aware this video is 3 years old. But if you plan to change your own fluid and filter in the future. B&M, others to probably, sells an aftermarket drain plug you can install into the pan. The only thing the kit doesn't come with is the drill bit to make the hole. It's definitely worth the few bucks!!
That's the bung or plug that fills the hole for the dipstick. Once the dipstick and tube are installed at factory, the bung gets pushed out and droppes into the pan.
Hey did you ever get this fixed, am having the same problem with my 2014 jeep wrangler, I went one morning to drive my jeep and it won't move, and I drove it the day before and it was fine, am so confused right now, any advice would be greatly appreciated,thanks .
I brought to transmission shop and they rebuilt. Shortly after the truck was totaled out. I hope you get your problem figured out, sure is frustrating.
help here. i have a 2022 camaro lt1. i rode over a big rock which busted my radiator but I'm having the same problem with the trans shifts but wont move. any comments would help.
I have same problem don’t move forward os reverse call 4 mechanic all say need rebuild.👀 my truck 2006 f 150 260,000 milles never chance filter or oil before … I’m all most call aaa to take my truck to the shop to rebuilt my transmission 2800 dollars , I’m chance oil and filter today .. a lease for now my truck 🛻 shifts nice today … I see oil is to bad , filter clogged…. No mechanic say to me trade to do this .. all say need rebuilt my transmission…./ I’m spent 75 dollars vs 3000 🤔 I’m just See all videos I’m you tube help me a lot…
Those darn nightmare transmission pans! And their silly little 14 or so bolts! Nice video, great explanation and presentation!
Thanks, You are right on!
The next time for anyone watching you just take the main drain hole plug assembly out of the pan before to drain the fluid very easy the larger plug that connect directly to the pan simply remove that drain it and then remove the pan easy peasy
What was the issue
Yep, that transmission was never serviced. Cause of many failures on these transmissions.
This videos is straight outta comedy 😭😩😂😂😂😂😂😂
Did u make another vido3 i couldn't find one???
I'm glad you asked. I brought it to the transmission shop and they did a full rebuild for about $2600. Needless to say I no longer have the truck as it was costing me too much. I now have a 2005 F150 that needs to have the transfer case replaced. I guess that's what I get when I buy them cheap. Thanks for asking.
@@joelongrid7625 what was the problem?
@@Sip28 the transmission guy explained to me that it was pretty messed up inside, he also showed me the parts that were in bad shape and had ground apart. I understood it the best I could and trusted he was shooting me straight.
@@joelongrid7625 oh lord
@@joelongrid7625 how do you know the transfer case is bad? i have a 2002 f150 fx4 and when i back up sometimes or go forward something seams like its locking up on it. u joints in main shaft are new.
Get a power tools!!!! Half video on unscrewing ?????? That's ridiculous.
Homie get to the point
Up to
Ford makes crap transmissions
Needs full rebuild, possible hard parts damage, fluid is overheated. driveway tip of the day...after loosening the pan allowing initial fluid drain just slide a floor jack under the pan and have it loosely support the pan until all bolts are out then with 2 hands support the pan against the trans firmly removing the slack and kick the jack away so the pan can be lowered.
I will be using your jack tip next time. It was sitting nearby and would have worked great. Thanks for watching.
Those shavings mean business. But we always hope its something simple. hardly ever is. You have what I would call a catastrophic failure. I feel your pain. I had to get my 2000 F150 tranny overhauled but had 218K. No shavings, just built in mileage failure.
For sure. I never had a tranny go bad so I was surprised. It did get a full rebuild. Thanks for watching.
Bro a transmission jack,an impact and BAM!!! no more dead time on your videos... and maybe a raise!!
Ha, for sure but then I might have to start doing it to make money. Maybe I better stick to what I know. Thanks for watching.
And G🎉🎉🎉🎉🎉😢❤😢@@joelongrid7625
Similar failire I'm repairing on a client's Ford E-150 Van. Only reading temp sensor failure but it's more complicated with nearly 300K on it
I have a 2004 GMC Envoy. Gears are shifting but truck just revs. No gears work. When I put it in park, it makes a nasty grinding noise. I have to place bricks under my tires or it will free roll. I really hope this video is only what's wrong. HELP!
Same problem I'm having now. What was your issue?
I could be wrong but i think a 120 ft.lbs.is excessive for those bolts,more like 10-20 ft.lbs.if you strip one of those,getting the gasket to reseal could be a knightmare...
He did say ft.lbs..and edited inch lbs..witch 120 inch lbs..would be 10 ft.lbs..
That’s excessive for about any bolt on that truck, much less a aluminum pan and case.
Great vid buddy . Need some help my 2005 F-150 4.6L 2wd . . .I entered my apartment and ran over a big pot hole And truck feels like it lost all drive gear??? Only reverse works :/ any advice??? Thanks :)
Bummer, I surely am not a mechanic but this sounds like a pro situation. Sorry I am not much help for you.
Did you figure it out I have the same problem
@@charrobudligth yeah man I ended up needing to rebuild the transmission :/ good luck !!!!!
@@12fireshadow thanks for replying
I will tell you from experience that little yellow plug that you see inside the pan is the plug that would normally block the dipstick tube hole in the transmission they push that through when they insert the dipstick tube when the truck is being manufactured. A lot of times that plug will fall down into the pan and it's usually forgotten about it won't harm anything but to any good mechanic that knows what to look for if somebody brings in their vehicle with transmission trouble and they find that plug still in the pan that's usually a good indication that the vehicle has never had the transmission serviced. It looks like your transmission never ever had a fluid change.
Good information. A tough lesson to learn after the fact for me. Thanks for the info.
Justamente estaba mirando este vídeo para identificar donde se ubicaba este tapón amarillo, gracias por la aportación. 👍🏾
My silverado had these same symptoms last year, wouldn't drive in reverse and felt like something was binding up in the transmission, but i could drive forward all day long for awhile, then after i tried to back up again it started binding up in forward and reverse both, dropped the trans pan and found metal chunks, long story short, chevys stock torque converters in the 2013 6 speed silverados are junk, it never locked up fully, threw debris in the pump and burned it up, scored the bellhousing, and starved the rest of the trans of fluid. The planetary gears in the trans were chipped thus binding the whole operation up. Had to get a $3200 rebuild. So in advance if you're looking to buy a silverado make sure that it has a 4L80e and not a 6L80e.
I have a 02 f1504x4 paid 300 for the truck ppl said tht the transmission would only work in reverse but I drop the pan no metal shaving no burnt smell I'm adding a new filter tomorrow n new fluid what else should I check before that
That is a question for a transmission guy. I neede professional help with nine.
Had this problem over a month ago change transmission oil and now filter. It worked good for a month now its not moving again
What did it end up being?
After the fluid change I just gave up on the car. It's just sitting in the driveway until I'm ready to junk it. I felt like the first time it was the transmission giving me a warning. Now it's just gone out. Didn't get professional opinion though
@@lisahughes7053 any update
@@krasher100 no it's been sitting since then just about to junk it
@@lisahughes7053 just actually solved it on my uncles car, so we did 3 things, be my guest to try one at a time to know what the problem was. I said it was the computers that needed a reset, & the fluid was too high. There's 2 set of notches on the dip stick the lower one is what you're working with unless the car is hot you want to make sure you fill it between the lower set of notches on the dip stick not past. They filled it with double what it should have been. Also just leave the battery unplugged for a while to reset the computer ez. My uncle and cousin wanted to redo it. We got a new filter & gasket from advance auto parts & more transmission fluid. We redid it wiggled the solenoids with clean gloves on & hand tightened everything back together no big tools. Replaced the battery and filled the transmission one to one & a half bottles of transmission fluid until you get to the bottom notches of the dipstick. Give it a couple minutes in between filling to check the dipstick to let the fluid settle. Lmk if you get the chance to try it we are curious what it was. It's running better than it ever was like a completely different car magnificent.
11:00 don’t beat yourself up. Good video.
Man Sir don’t use those types of wheel chalks use something smaller and try never lifting your truck from the skid plate and last that pan is not torque to 150 ft pounds probably 150 inch pounds
Thanks for all the tips. I can use all i can.
@@joelongrid7625 no problem I’ve been a mechanic for 35 yrs was looking around of what my friend is getting himself into trying to help him afar
2001 crown victoria transmission still shifts, moves and blows by F150s every morning.
That Crown Vic will probably outlast everything on the road right now. :)
Not my crown Vic car doesn’t go in drive just reverse
Does a transmission REALY need fluid!!!!LOL
My vehicle is doing this but it’s a 2006 so what do I look for ?
What did you end up doing?
@@foxyt9497 check your throttle body, the wiring if anything. My problem was the wiring.
I have a Toyota axio 2009, and for some reasons the Drive gear just stopped working. The car won't drive forward but can go on reverse. How can I fix it without necessarily replacing the whole transmission?
Did you ever get this fixed I have the same issue
@@armondoromo4724 yeah I did get it fixed. Turns out that the seal to the shaft ha worn out. So we just replaced that seal and it has been okay since
So what was the fix
Full rebuild. $2600 and I do not have the truck any longer. Thanks for watching.
@@joelongrid7625 Did you hear any noise or rattling sound under the car before the transmission give up?
@@eranomanahan9118 There was a clunking sound if I recall correctly.
@@eranomanahan9118 why is it that you asked this question, I'm kindly asking and very interested... moves was done that rattling/clunky or grinding nose
@@wayneb1357 That was my experienced before my transmission was done. But I can still feel that it changes gears when I tried but it it not engaging. I am thinking of the torque converter.
But who so ever told you filter drop in pan but filter was at its place , ,
15 or 16 years with no fluid and filter change.
Hey Joel, I'm aware this video is 3 years old. But if you plan to change your own fluid and filter in the future. B&M, others to probably, sells an aftermarket drain plug you can install into the pan. The only thing the kit doesn't come with is the drill bit to make the hole. It's definitely worth the few bucks!!
Good information for those who will see this. Appreciate the comment.
I want to know how much is a transmission of a 2004 Ford truck
Damn Sir where’s your oil🤡
Does it have 260,000 miles on it?
Could you tell me what was the yellow float type thing for?
That's the bung or plug that fills the hole for the dipstick. Once the dipstick and tube are installed at factory, the bung gets pushed out and droppes into the pan.
It's not a 2007
You are correct. 2004. I had to have it totally rebuilt. Thanks for the comment.
That transmission is done
So what ended up happening ???
Ended up not owning the truck any longer. Had the tranny rebuilt though.
Should be called, "How to drain the transmission pan"
Yeah, I'm not the most graceful at it. Ha.
😂😂😂😂😂
Hey did you ever get this fixed, am having the same problem with my 2014 jeep wrangler, I went one morning to drive my jeep and it won't move, and I drove it the day before and it was fine, am so confused right now, any advice would be greatly appreciated,thanks .
I brought to transmission shop and they rebuilt. Shortly after the truck was totaled out. I hope you get your problem figured out, sure is frustrating.
help here. i have a 2022 camaro lt1. i rode over a big rock which busted my radiator but I'm having the same problem with the trans shifts but wont move. any comments would help.
Probably lost a lot of trans fluid, fill er up
drive better
@@samf2279 new radiator might fix it. trans cooler lines run through there.